Page 132 of 506

130 Controls in detailMemory function
You can store up to three different settings
for each SmartKey or SmartKey with
KEYLESS-GO*.
The following settings are stored when us-
ing the buttons on the driver’s door:
Driver’s seat, backrest, head restraint
position and settings for multicontour
seat
Steering wheel position
Exterior rear view mirror positions
These SmartKey-dependent memory set-
tings can be deactivated if desired. For in-
formation on SmartKey-dependent
memory settings, see “Setting
SmartKey-dependency” (
page 168).
The following settings are not
SmartKey-dependent. They are stored
when using the buttons on the front pas-
senger door:
Front passenger seat, backrest, head
restraint position and settings for mul-
ticontour seat
!Prior to operating the vehicle, the driv-
er should check and adjust the seat
height, seat position fore and aft, and
seat backrest angle if necessary, to
ensure adequate control, reach and
comfort. The head restraint should also
be adjusted for proper height. See also
the section on air bags (
page 61) for
more information on proper seat posi-
tioning.
In addition, adjust the steering wheel to
ensure adequate control, reach, opera-
tion and comfort. Both the interior and
exterior rear view mirrors should be ad-
justed for adequate rear vision.
Fasten seat belts. Infants and small
children should be seated in a properly
secured restraint system that complies
with U.S. Federal Motor Vehicle Safety
Standards 213 and 225 and Canadian
Motor Vehicle Safety Standards 213
and 210.2.
Warning!
G
Do not activate the memory function while
driving. Activating the memory function
while driving could cause the driver to lose
control of the vehicle.
Page 170 of 506

168 Controls in detailControl systemThe following settings are available for the
easy-entry/exit feature:Setting SmartKey-dependency
Use this function to set whether the mem-
ory settings for the seats, the steering
wheel, the mirrors and other settings of
the control system should be stored sepa-
rately for each SmartKey (
page 98).
Move the selection marker with
theæ orç button to
the
Convenience
submenu.
Press buttonj ork repeatedly
until you see this message in the dis-
play:
Key-dependent
.
The selection marker is on the current
setting.
Press buttonæ orç to set
SmartKey-dependency to
on or
off
. Setting parking position for exterior rear
view mirror
Use the
Mirror adjustment parking aid
function to select whether the passen-
ger-side exterior rear view mirror should be
turned downward during parking maneu-
vers when reverse gearR is engaged. For
additional information, see “Activating ex-
terior rear view mirror parking position”
(
page 187).
Move the selection marker to the Convenience
submenu using theæ
orç button.
Press buttonj ork repeatedly
until you see this message in the dis-
play:
Mirror adjustment parking aid
.
The selection marker is on the current
setting.
off
The easy-entry/ex-
it feature is deacti-
vated.
Steering col.
Only the steering
column is moved.
Steering col. +
seat
Both the steering
column and the
seat are moved.
Page 498 of 506

496 IndexSettings
Calling up Distronic* 152, 238
Convenience functions 167
Factory, KEYLESS-GO* 105
Factory, SmartKey 99
Individual 168
Lighting (control system) 162
Menus and submenus 147
Resetting all (control system) 154
Resetting in the submenu 155
Selective 100, 106
Settings menu
Functions in 154
Individual vehicle settings 154
Submenus 155
Shift lock 475
Shifting
Gear selector lever positions 178
Into optimal gear range (automatic
transmission) 176
Side impact airbags 66
Side marker lamps 418, 422Side windows
Automatic opening 219
Cleaning 352
Closing 218, 219
Opening 218
Opening fully (Express-open) 219
Stopping 220
Synchronizing power windows 220
Sidewall 338
Simultaneous wiping and washing
Windshield wipers 52
Single wipe 52
Ski sack* 254
Removing 257
Unfolding and loading 254
Unloading and folding 256
Sliding/pop-up roof* 223
Closing 223
Opening 223
Stopping 225, 229
Synchronizing 225
Sliding/pop-up roof* or panorama slid-
ing/pop-up roof*
Emergency operations 414SmartKey 98
Battery check lamp 100, 106
Checking the batteries 101, 107
Factory setting 99
Global locking 100
Global locking and unlocking 99
Global unlocking 99
Locking and unlocking 98
Loss of 102
positions in starter switch 33
Remote controls 98, 102
Restoring to factory setting 100, 106
Selective setting 100, 106
Starting the engine 46, 47
Unlocking with 32
SmartKey with KEYLESS-GO* 102
Global locking and unlocking 105
Loss of 108
Messages in display 391
Remote controls 102
Turning off the engine 57
Unlocking with 33
SmartKey-dependent memory
Settings 168