2005 MERCEDES-BENZ E WAGON folding

247 Controls in detail
Loading
Loading
Split rear bench seat
To expand the cargo compartment, you
can fold down the left and right rear seat
backrests.
The two sections can be folded down sep-
arately to enlarge the cargo compartment.Folding the backrest forward
1Release catch
2Seat cushion

Pull release catch1 and use it to pull
seat cushion2 up.1Release catch
2Seat backrest

Pull release catch1 up.
The seat backrest is released and the
head restraints fold back.

Fold the seat backrest2 forward.
Warning!
G
When expanding the cargo compartment, al-
ways fold the seat cushions fully forward.
Unless you are transporting cargo, the back-
rests must remain properly locked in the up-
right position.
In an accident, during hard braking or sud-
den maneuvers, loose items will be thrown
around inside the vehicle, and cause injury
to vehicle occupants unless the items are
securely fastened in the vehicle.
Always use the cargo tie down rings
(page 251).
!You must always release the seat cush-
ion and fold it up before folding the seat
backrests forward. The upholstery on
the backrest may otherwise be dam-
aged.
iIf tall persons have occupied the
driver’s and front passenger seats, it
may be necessary to move these seats
forward slightly in order to fold the rear
seat backrests forward.

249 Controls in detail
Loading
Adjusting seat backrest position
1Release catch
2Seat backrest

Pull right seat release catch1 up and
fold seat backrest forward.

With the seat backrest released, pull
release catch1 up again.

Pull left seat release catch1 up and
fold seat backrest forward.

With the seat backrest released, pull
release catch1 up again.

Fold left seat backrest to the rear until
it engages.

Fold right seat backrest to the rear until
it engages.
The seat backrests are now in the alter-
native position.
Expanding the cargo compartment
Removing the rear seat cushions will pro-
vide you with a larger, flat cargo compart-
ment.
Fold the seat cushions forward
(page 247).
1Release lever

Pull seat cushion release lever1 and
remove the seat cushion by pulling it
upward.

Remove the head restraints
(page 129).
iThe seat backrests can be placed in an
alternative upright position. This cre-
ates a larger cargo compartment area
or provides for improved seating com-
fort on the folding bench seat, if re-
quired.

347 Operation
Vehicle care
Ornamental moldings
For regular cleaning and care of very dirty
chrome-plated parts, use a chrome clean-
er.
Headlamps, tail lamps, side markers,
turn signal lenses
Use a mild car wash detergent, such as
Mercedes-Benz approved Car Shampoo,
with plenty of water.
To prevent scratches, never apply strong
force and use only a soft, non-scratchy
cloth when cleaning the lenses. Do not at-
tempt to wipe dirty lenses with a dry cloth
or sponge.Cleaning the Distronic* system sensor
cover
1Distronic system sensor cover
Use a mild car wash detergent, such as
Mercedes-Benz approved Car Shampoo,
with plenty of water to clean sensor
cover1.
To prevent scratches, never apply strong
force and use only a soft, non-scratchy
cloth when cleaning the sensor cover. Do
not attempt to wipe dirty sensors with a
dry cloth or sponge.Wiper blades

Turn on the wipers and place it in a ver-
tical position.
For information on placing the wipers in a
vertical position, see “Replacing wiper
blades” (
page 416).
iRestart the engine after cleaning sen-
sor cover1.!The windshield wipers must be in a ver-
tical position before folding them away
from the windshield. They could other-
wise damage the hood.


348 OperationVehicle care
Clean the wiper blade inserts with a
clean cloth and detergent solution.Window cleaning

Turn on the wipers and place it in a ver-
tical position.
For information on placing the wipers in a
vertical position, see “Replacing wiper
blades” (
page 416).Use a window cleaning solution on all glass
surfaces. An automotive glass cleaner is
recommended.
Light alloy wheels
Mercedes-Benz approved Wheel Care
should be used for regular cleaning of the
light alloy wheels.
If possible, clean wheels once a week with
Mercedes-Benz approved Wheel Care, us-
ing a soft bristle brush and a strong spray
of water.
Follow the instructions on the container.
Warning!
G
For safety reasons, switch off wipers and re-
move SmartKey from starter switch (vehi-
cles with KEYLESS-GO*: Make sure the
vehicle’s on-board electronics have
status 0) before cleaning the wiper blades.
Otherwise, the wiper motor could suddenly
turn on and cause injury. !Fold the windshield wiper arms back
onto the windshield before turning the
SmartKey in the starter switch.
Hold on to the wiper when folding the
wiper arm back. If released, the force
of the impact from the tensioning
spring could crack the windshield.
!The windshield wipers must be in a ver-
tical position before folding them away
from the windshield. They could other-
wise damage the hood.Warning!
G
For safety reasons, switch off wipers and re-
move SmartKey from starter switch (vehi-
cles with KEYLESS-GO*: Make sure the
vehicle’s on-board electronics have
status 0) before cleaning the windshield.
Otherwise, the wiper motor could suddenly
turn on and cause injury.
!Fold the windshield wiper arms back
onto the windshield before turning the
SmartKey in the starter switch.
Hold on to the wiper when folding the
wiper arm back. If released, the force
of the impact from the tensioning
spring could crack the windshield.


401 Practical hints
Where will I find ...?
Where will I find ...?
First aid kit
The first aid kit is in the storage compart-
ment at the front edge of the front passen-
ger seat.
1Tab
Pull tab1 upward.

Fold the covering forward.

Remove the first aid kit.
Vehicle tool kit, jack and spare wheel
The vehicle tool kit is located in the cargo
compartment underneath the third row
seat cushions and footwell.
1Release handle for seat backrest
2Release handle for seat cushion
Pull release handle 1 and fold seat
backrest for the folding bench seat up-
ward.

Pull release handle 2, fold seat cush-
ion upward and remove it
(page 136).1Release handle
2Footwell

Pull release handle 1 and fold
footwell2 up.

To lock, fold footwell 2 back into its
original position and press it down until
it engages.
iCheck expiration dates and contents
for completeness at least once a year
and replace missing / expired items.
iIn order to access the vehicle tool kit,
you must first detach the side cover.

417 Practical hints
Replacing wiper blades
Installing wiper blades
Slide the wiper blade onto wiper arm
until it locks in place.

Rotate the wiper blade into position
parallel to wiper arm.

Fold the wiper arm backward to rest on
the windshield. Make sure you hold on
to the wiper when folding the wiper arm
back.
!Never open the hood when the wiper
arm is folded forward.
Hold on to the wiper when folding the
wiper arm back. If released, the force
of the impact from the tensioning
spring could crack the windshield.
Do not allow the wiper arms to contact
the windshield glass without a wiper
blade inserted.
Make certain that the wiper blades are
properly installed. Improperly installed
wiper blades may cause windshield
damage.
For your convenience, we recommend
that you have this work carried out by
an authorized Mercedes-Benz Center.

467 Index
Automatic transmission 183
Comfort program mode 188
Emergency operation (Limp Home
Mode) 190
Gear ranges 186
Gear selector lever position 187
Gear shifting malfunctions 190
Manual shifting 185
One-touch gearshifting 185
Program mode selector switch 188
Selector lever position 183
Starting the engine 47
Automatic transmission*
Accelerator position 189
Kickdown 189
B
Backrest
Folding forward 247
Folding rearward 248
Bar 333
BAS 89, 459
Batteries, SmartKey
Changing 408, 409
Check lamp 105, 111
Checking 106, 112Batteries, SmartKey with KEYLESS-GO*
Changing 408, 409
Batteries, vehicle
Charging 427
Disconnecting 426
Reconnecting 427
Removing 426
Service 424
Battery discharged
Jump starting 428
Bead 333
Belt reel 254
Bi-Xenon headlamps* 459
Block heater* 338
Blocking
Rear window operation 84
Brake assist system (BAS) 459
Brake fluid 297, 377
Brake pads
Message in display 375
Brakes
Brake fluid 298
Warning lamp 354
Break-in period 284Bulbs, replacing
Additional turn signals 410
Fog lamps 410
Front lamps 410, 413
High beam 411
High mounted brake lamp 411
License plate lamps 411, 415
Low beam 411
Parking lamps 411
Side marker lamps 410, 415
Standing lamps 411
Tail lamp 411
Tail lamp assemblies 415
Turn signal lamp 410
C
CAC (Customer Assistance Center) 459
Calling up
Distronic* settings 160
Maintenance service indicator 341
Range (distance to empty) 179
CAN system 459
Cargo compartment
Fuse box 435
Cargo compartment cover 257
Cargo management system* 252
Cargo net 256

472 IndexEngine oil
Adding 302
Checking level 300
Consumption 300
Display messages 382
Messages in display 301
Viscosity 460
ESP 89, 460
Four wheel electronic traction system
with ESP 95
Switching off 91
Switching on 92
Synchronizing 367
Warning lamp 353
ETD 460
Safety guidelines 66
Exterior lamp switch 141
Exterior rear view mirrors
Adjusting 42
Parking position for 176
F
Fahrenheit
Setting temperature units 165
Fastening the seat belts 44
Fine adjustment
Cruise control 231First aid kit 401
Flat tire 418
Mounting the spare wheel 419
Spare wheel 419
Flexible Service System (FSS) 461
Floormats 268
Fog lamp, rear 145
Fog lamps
Switching on 144
Fog lamps, front
Messages in display 386
Switching on 144
Folding back folding bench seat 136
Folding bench seat in cargo
compartment 134
Folding head restraints back 127
Following distance in Distronic* 239
Four wheel electronic traction system
(4MATIC) with ESP 95
4MATIC 95
4-zone automatic climate control* 208
Front airbags 67
Front doors
Opening from inside vehicle 115
Front fog lamp
Replacing bulb 411Front interior lighting 148
Front lamps 411
Messages in display 387
Replacing bulbs 413
Switching on 141
Front reading lamps
Switching on/off 148
Front seat head restraints
Power seat 126
Removing and installing 126
Front seats
Heater* 132
FSS (Flexible Service System) 461
Fuel 297
Fuel tank reserve warning lamp 357
Premium unleaded gasoline 297
Fuel consumption statistics
After start 178
Since last reset 178
Fuel filler flap 296
Locking 296
Unlocking 296
Fuel reserve tank
Message in display 385
Fuel tank
Filler flap 296