Page 394 of 491
393 Practical hints
What to do if …
Display symbol
Display messages
Possible cause
Possible solution
H
Caution
Tire pres., RL
The left rear tire is deflating.
Carefully bring the vehicle to a halt, avoiding
abrupt steering and braking maneuvers.
Observe the traffic situation around you.
Change the wheel (
page 419).
Have the damaged wheel repaired or
replaced at an authorized Mercedes-Benz
Center.
Tire pressure, RL
Check tire
The left rear tire inflation pressure is
low.
Carefully bring the vehicle to a halt.
Check the tire.
Check and correct the tire inflation pressure
as required.
If necessary, change the wheel (
page 419).
Warning!
G
Do not drive with a flat tire. A flat tire affects
the ability to steer or brake the vehicle.
You may lose control of the vehicle. Contin-
ued driving with a flat tire will cause exces-
sive heat build-up and possibly a fire.
Page 395 of 491
394 Practical hintsWhat to do if …Display symbol
Display messages
Possible cause
Possible solution
H
Caution
Tire pres., RR
The right rear tire is deflating.
Carefully bring the vehicle to a halt, avoiding
abrupt steering and braking maneuvers.
Observe the traffic situation around you.
Change the wheel (
page 419).
Have the damaged wheel repaired or
replaced at an authorized Mercedes-Benz
Center.
Tire pressure, RR
Check tire
The right rear tire inflation pressure is
low.
Carefully bring the vehicle to a halt.
Check the tire.
Check and correct the tire inflation pressure
as required.
If necessary, change the wheel (
page 419).
Warning!
G
Do not drive with a flat tire. A flat tire affects
the ability to steer or brake the vehicle.
You may lose control of the vehicle. Contin-
ued driving with a flat tire will cause exces-
sive heat build-up and possibly a fire.
Page 396 of 491
395 Practical hints
What to do if …
Display symbol
Display messages
Possible cause
Possible solution
H
Caution
Tire pres., FL
The left front tire is deflating.
Carefully bring the vehicle to a halt, avoiding
abrupt steering and braking maneuvers.
Observe the traffic situation around you.
Change the wheel (
page 419).
Have the damaged wheel repaired or
replaced at an authorized Mercedes-Benz
Center.
Tire pressure, FL
Check tire
The left front tire inflation pressure is
low.
Carefully bring the vehicle to a halt.
Check the tire.
Check and correct the tire inflation pressure
as required.
If necessary, change the wheel (
page 419).
Warning!
G
Do not drive with a flat tire. A flat tire affects
the ability to steer or brake the vehicle.
You may lose control of the vehicle. Contin-
ued driving with a flat tire will cause exces-
sive heat build-up and possibly a fire.
Page 397 of 491
396 Practical hintsWhat to do if …Display symbol
Display messages
Possible cause
Possible solution
H
Caution
Tire pres., FR
The right front tire is deflating.
Carefully bring the vehicle to a halt, avoiding
abrupt steering and braking maneuvers.
Observe the traffic situation around you.
Change the wheel (
page 419).
Have the damaged wheel repaired or
replaced at an authorized Mercedes-Benz
Center.
Tire pressure, FR
Check tire
The right front tire inflation pressure
is low.
Carefully bring the vehicle to a halt.
Check the tire.
Check and correct the tire inflation pressure
as required.
If necessary, change the wheel (
page 419).
Warning!
G
Do not drive with a flat tire. A flat tire affects
the ability to steer or brake the vehicle.
You may lose control of the vehicle. Contin-
ued driving with a flat tire will cause exces-
sive heat build-up and possibly a fire.
Page 412 of 491
411 Practical hints
Replacing bulbs
Front lamps Rear lamps
Lamp
Type
1
Additional turn signal
lamps
LED
2
Turn signal lamp
1156 NA
3
Side marker lamp
W 5 W
4
Halogen headlamps:
Low beam
Bi-Xenon* headlamps:
Low and high beam
1
1Vehicles with Bi-Xenon* headlamps: Low beam
and high beam use the same D2S-35W lamp. Do
not replace the Bi-Xenon bulbs yourself. See your
authorized Mercedes-Benz Center.
H7 (55 W)
D2S-35 W
5
Halogen headlamps:
High beam/high beam
flasher
Bi-Xenon* headlamps:
High beam flasher
H7 (55 W)
H7 (55 W)
Parking and standing
lamps
W 5 W
6
Front fog lamp
H1 (55 W)
Lamp
Type
7
High mounted brake
lamp
LED
8
Brake lamp
HiP
LED*
Turn signal lamp
HiP
Tail, parking, standing
and side marker lamp
HiP
Rear fog lamp (driver’s
side)
HiP
9
License plate lamps
C 5 W
Page 413 of 491

412 Practical hintsReplacing bulbs
Notes on bulb replacement
Only use 12 volt bulbs of the same type
and with the specified watt rating.
Switch lights off before changing a bulb
to prevent short circuits.
Always use a clean lint-free cloth when
handling bulbs.
Your hands should be dry and free of oil
and grease.
If the newly installed bulb does not light
up, visit an authorized Mercedes-Benz
Center.
Have the LEDs and bulbs for the follow-
ing lamps replaced by an authorized
Mercedes-Benz Center:
Additional turn signals in the exteri-
or rear view mirrors
High mounted brake lamp
Bi-Xenon* lamps
Front fog lamps
Rear lamps (except license plate
lamps)
Warning!
G
Bulbs and bulb sockets can be very hot. Al-
low the lamp to cool down before changing
a bulb.
Keep bulbs out of reach of children.
Halogen lamps contain pressurized gas. A
bulb can explode if you:
touch or move it when hot
drop the bulb
scratch the bulb
Wear eye and hand protection.
Because of high voltage in Bi-Xenon* lamps,
it is dangerous to replace the bulb or repair
the lamp and its components. We recom-
mend that you have such work done by a
qualified technician.
iHave the headlamp adjustment
checked regularly.
Page 419 of 491

418 Practical hintsFlat tireIn the case of a flat tire, you may tempo-
rarily use the spare wheel when observing
the following restrictions:
Do not exceed a vehicle speed of
50 mph (80 km / h).
Drive to the nearest tire repair facility
to have the flat tire repaired or re-
placed as appropriate.
Do not operate vehicle with more than
one spare wheel mounted.
Preparing the vehicle
Park the vehicle as far as possible from
moving traffic on a hard surface.
Turn on the hazard warning flashers.
Engage the steering wheel lock in the
straight-ahead position and set the
parking brake.
Move the selector lever toP.
Vehicles with SmartKey:
Turn off the engine (
page 57).
Remove the SmartKey from the starter
switch.Vehicles with SmartKey with
KEYLESS-GO*:
Turn off the engine by pressing the
KEYLESS-GO* start/stop button on the
gear selector lever once (
page 59).
Open the driver’s door (this puts the ig-
nition in position0, same as with the
SmartKey removed from the starter
switch). The driver’s door then can be
closed again.
Have any passenger exit the vehicle at
a safe distance from the roadway.
Warning!
G
The dimensions of the Minispare wheel and
the collapsible tire are different from those
of the road wheels. As a result, the vehicle
handling characteristics change when driv-
ing with a spare wheel mounted.
The spare wheel should only be used tempo-
rarily, and replaced with a regular road
wheel as quickly as possible.
iOpen door only when conditions are
safe to do so.
Page 420 of 491

419 Practical hints
Flat tire
Mounting the spare wheel
Preparing the vehicle
Prepare the vehicle as described under
“Preparing the vehicle” on this page.
Take the spare wheel out of the cargo
compartment (
page 402).
Take the wheel wrench and the jack
out of the cargo compartment
(page 402).
Lifting the vehicle
Prevent the vehicle from rolling away
by blocking wheels with wheel chocks
or other sizable objects.
When changing wheel on a level surface:
Place one chock in front of and one be-
hind the wheel that is diagonally oppo-
site to the wheel being changed.When changing wheel on a hill:
Place chocks on the downhill side
blocking both wheels of the other axle.
On wheel to be changed, loosen but do
not yet remove the wheel bolts (ap-
proximately one full turn with wrench).
Warning!
G
The jack is designed exclusively for jacking
up the vehicle at the jack take-up brackets
built into either side of the vehicle. To help
avoid personal injury, use the jack only to lift
the vehicle during a wheel change. Never
get beneath the vehicle while it is supported
by the jack. Keep hands and feet away from
the area under the lifted vehicle. Always
firmly set parking brake and block wheels
before raising vehicle with jack.
Do not disengage parking brake while the
vehicle is raised. Be certain that the jack is
always vertical (plumb line) when in use,
especially on hills. Always try to use the jack
on level surface. Be sure that the jack arm is
fully seated in the jack take-up bracket.
Always lower the vehicle onto sufficient ca-
pacity jackstands before working under the
vehicle.