2005 MERCEDES-BENZ E-Class system

92 Telephone*Telephone operationEntering a phone number 
Open the Telephone main menu
(page 89).

Use -  to enter the phone num-
ber.
In case of erroneous entry, you can de-
lete the last or more digits.
Press the
Delete
soft key as often as
required.

After entering the phone number,
press.
The telephone dials the entered num-
ber. The call is activated the moment
the other party answers the call. Com-
munication is conducted via the hands-
free system. The volume can be adjust-
ed (
page 30).
For other user functions, see
“Active call” (
page 96).Initiating redial
On the COMAND control unit
Immediate re-dialing of the number dialed
last can be initiated:

Press in the Telephone main
menu twice.
The telephone establishes the connec-
tion with the number dialed last.
On the multifunction steering wheel

Switch the multifunction display in the
instrument cluster to the Telephone
main display (
page 25).

Presss twice.
The telephone establishes the connec-
tion with the number dialed last.In both cases the telephone initiates the
call. The call is activated the moment the
other party answers the call. Communica-
tion is conducted via the hands-free sys-
tem. The volume can be adjusted
(
page 30).
For other user functions, see
“Active call” (
page 96).
After switching to telephone operation,
COMAND can display the number of
missed calls in the status bar.
iWhen pressings only once, the di-
aled calls list appears in the multifunc-
tion display (
page 94).
Accepted and missed calls

99 Telephone*
Phone book
The following options are now available:
Switching between number and
name(
page 99).

Selecting a phone book entry and est-
sablishing a connection(
page 99).

Adding spoken names to a phone book
entry (
page 100). This option is only
available for vehicles with voice control
system*.

Deleting a phone book entry
(page 100).
Switching between number and name

Open the phone book from COMAND
(page 98).

Press the
123
soft key.
This switches the display to number
display. The name of the highlighted
entry is shown in the status bar;
or

Press the
ABC
soft key.
This switches the display to name dis-
play. The number of the highlighted en-
try is shown in the status bar.
On the COMAND control unit

Open the phone book (
page 98).
A list of phone book entries appears,
beginning with a specific first letter (ini-
tial).
Changing initials

Press or  once or repeatedly.
Each time you press the button, the
display changes to the next letter up or
down. At the end of the list of letters is the
category
Other
. This category combines
all entries without a name, or entries
whose names start with a special char-
acter (e.g.
* or
#).
Selecting an entry

If necessary, change the initial letter
(page 99).

Select an entry using  or .
If you press and hold either one of the
buttons, the scrolling up or down accel-
erates.
Establishing a connection

Press.
The telephone initiates the connection
with the appropriate number.
Selecting a phone book entry and es-
tablishing a connection

100 Telephone*Phone bookOn the multifunction steering wheel 
Switch the multifunction display in the
instrument cluster to the Telephone
main display (
page 89).

Pressj or k repeatedly until
the desired entry is shown in the multi-
function display.

Presss
.
The telephone initiates the connection
with the selected number.
If your vehicle is equipped with voice con-
trol system* you can add up to 20 spoken
names to each phone book entry.
Via the voice control system* you can dial
a number by speaking the name.
(
Voice control system* Operator's man-
ual).

Select a phone book entry (
page 99).

Press the
New
soft key.
The voice control system* prompts you
to speak a name.

Speak the name.
The voice control system* prompts you
to speak the name again.

Repeat the name.
The name is stored.

Select the phone book entry to be de-
leted from COMAND (
page 99).

Press the
Delete
soft key.
The delete prompt is displayed.

Use to select the menu item
Yes
.

Press.
The entry is deleted.
Adding spoken names to a phone
book entry
Deleting a phone book entry

107 Navigation*
Important notes
COMAND calculates the route with the
help of data that is stored on the naviga-
tion DVD.
Only use Mercedes-Benz navigation DVDs
designed for the E-Class (211) COMAND
system. No other CDs or DVDs will work.
Using other navigation CDs or DVDs might
lead to malfunctions.
Because of changes in local traffic patterns
(e.g. road works) and/or incomplete data,
errors in calculation may occur.
As a result, the recommended route may
deviate from the ideal route. The data
stored on the DVD only reflects local con-
ditions at the time of DVD production. DVD
maps do not cover all areas nor all routes
within an area.The DVD is loaded into (and ejected from)
the navigation module.
The navigation module is mounted on the
left-hand side of the trunk.
1Ejecting DVDs
2DVD slotLoading

Insert the DVD into the DVD slot 2
with the label facing up.
The navigation computer pulls the DVD
in.
Ejecting

Press and wait until the navigation
computer ejects the DVD.
Navigation DVD
Loading/ejecting the DVD
iYour Navigation DVD drive has been
designed to play DVDs which corre-
spond to the IEC 60908 standard.
If you insert thicker data carriers, e.g.
ones that have data on both sides (one
side with DVD data, the other side with
audio data), they cannot be ejected
and will damage the drive.

108 Navigation*Important notesThe navigation DVD covers the continental
U.S., Hawaii and Canada.
Contact your Mercedes-Benz Center or the
Customer Assistance Center in the U.S. at
1-800-FOR-MERCedes (1-800-367-6372)
or in Canada at 1-800-387-0100 for other
DVDs that may be available.
Change the navigation DVD
(page 107).
TIf your vehicle has been transported by a
car, train or ferry, COMAND may require
some time to find its exact position.
COMAND may issue navigation announce-
ments not suited to your actual position. Moving the vehicle a few yards is typically
enough to remedy the situation.
While determining the exact position ,
route guidance is subject to the following
restrictions:

COMAND does not output navigation
announcements.

The display
OFF
ROAD
and an arrow indi-
cating the direction of the destination
appear instead of the detailed naviga-
tion displays.
Once the system is correctly repositioned,
route guidance continues with navigation
announcements and detailed navigation
displays.
Travelling abroadRoute guidance with GPSiGPS (G
lobal P
ositioning S
ystem) sig-
nals received make it possible to deter-
mine the current vehicle position.
iDeviations from the actual position
may occur 
if the reception of GPS signals is
disturbed e. g. in parking garages
and tunnels

if road conditions are bad

depending on the vehicle’s condi-
tion
Route guidance after vehicle trans-
port
iThe navigation DVD must be loaded in
the navigation computer (
page 107).

109 Navigation*
Important notes
The following instructions have to be fol-
lowed when interrupting a trip during route
guidance, and later continuation:
Continuation of the trip within 2 hours
after interruption:
The system automatically resumes
route guidance.

Continuation of the trip between
2 and 12 hours after interruption: 
Continue route guidance manually
in the Navigation main menu
(page 110).

Continuation of the trip more than 12
hours after interruption:
Route guidance must be restarted.
Select the destination from the
Last
destinations
memory (
page 147),
or

Re-enter the destination
(page 117).
Some menus provide lists from which you
can select an item.
Example: Menu to select a streetYou can select a list item using or .
If, as shown in the example, you can see
the
Page
soft keys, then you can use the
soft keys to scroll up or down the list, page
by page.
As soon as you reach the beginning or end
of a list, the appropriate soft key is deacti-
vated.
Trip interruption during route guid-
ance iTrip interruption means parking the ve-
hicle and switching COMAND OFF.
Trip continuation means trip continua-
tion with COMAND switched ON.
Selection lists

110 Navigation*Navigation main menu
Press .
The Navigation main menu appears, if
no route guidance is active.

Use or  to select a menu item
and press;
or

Press one of the soft keys.
The selected menu or the selected soft
key function appears.
Selectable menu items

Continue route guidanceContinues a cancelled route guidance,

Destination memoryDestinations can be selected from the Destination memory
(page 148),

Destination entryProvides access to the Destination en-
try menu (
page 117),

Last destinationsYou can select from the list of last des-
tinations (
page 147),

POIs(Points o
f Interest)
Provides access to POIs input
(
page 151). POIs include stops at
gas stations, airports, rest areas, hospi-
tals, etc.
Calling up the Navigation main menuiIf route guidance is active, a prompt is
displayed instead, asking if route guid-
ance is to be cancelled (
page 134).
iThis menu item only appears:
if the route guidance had previously
been interrupted (
page 134), and
less than 30 minutes have expired
since the interruption,
or

if the trip was interrupted and is to
be continued 2 - 12 hours after in-
terruption (
page 109).
iDestination memory
and
Last destinations

can only selected only if destinations
are already stored in the system.

111 Navigation*
Navigation main menu
Selectable soft keys
Home
soft key
Provides access to the input of a home
address (
page 115).

Mode
soft key
Provides access to the route mode set-
ting for certain road types to be avoid-
ed (page 111).

Setting
soft key
Provides access to settings adjusting
the acoustics of navigation announce-
ments (treble, bass, volume, balance
and fader)
(
page 111).
Certain road types to be avoided can be
defined for the system’s route calculation.

Press the
Mode
soft key in the Navigation
main menu (page 110).
The Setting Mode menu for road types
to be avoided appears.

Use or  to select an option.

Press .
This will switch the option ON or OFF.

Upon completion, press the
Back
soft
key.The following acoustics criteria for naviga-
tion announcements can be adjusted:

Bass / Treble (
page 112).

Balance / Fader (
page 112).

Volume (
page 112).

Press the
Setting
soft key in the Naviga-
tion main menu (page 110).
The Setting menu appears.
Avoiding certain road types
iEmpty square = option OFF
Solid square = option ON
Several options can be activated.
Adjusting the acoustics for
navigation announcements