2005 MERCEDES-BENZ E-Class audio

65 Audio
CD changer* operation
The following options are available:
Ejecting one CD

Ejecting all CDs (
page 66)
Ejecting one CD
1CD slot
2Magazine compartment buttons

Access the CD changer (
page 61).

Briefly press the appropriate magazine
compartment button 2.
The button LED 2 flashes red. The CD
changer ejects the CD.

Within 15 seconds, remove the CD
from the slot 1.
The CD will be pulled in again if it is not
removed from the slot within approx.
15 seconds. The system starts playing
the CD again.
The ejection procedure is completed.

Retract the CD changer (
page 61).
Ejecting CDs
iIf you are listening to a CD in the CD
changer and you eject another CD from
the changer:
While ejecting the CD, the system
interrupts CD playback.

The CD you were last listening to
starts from the beginning once the
ejection procedure is completed.
If you eject the CD you are currently lis-
tening to:

The next available audio CD is
played.

If there are no other CDs available,
the system switches to the audio
source listened to before CD chang-
er mode.

66 AudioCD changer* operationEjecting all CDs 
Access the CD changer (
page 61).

Press and hold the button of a loaded
magazine compartment 2 for more
than 2 seconds.
The button LEDs of all loaded magazine
compartments will briefly flash red,
several times.
The CD changer ejects the CDs one af-
ter another.

Within 15 seconds, remove each CD
from the slot 1.
The CD will be pulled in again if it is not
removed from the slot within approx.
15 seconds. The system starts playing
the CD again.The ejection procedure is completed
when all CDs are removed, or when the
procedure is aborted by the CD chang-
er.

Retract the CD changer (
page 61).

Open the Audio main menu
(page 36).

Press the
CDC
soft key.The CD changer main menu appears.
You will hear the CD listened to last. If
the CD listened to last is no longer
available, the unit plays the next avail-
able audio CD.
If the CD contains CD text data, the CD
changer main menu will show the name
of the CD and the title of the track cur-
rently playing.
The status bar also contains:

The track number and total number
of tracks

The elapsed playing time of the
track
CD changer main menuiThe CDC soft key is shaded out if no CD
is loaded. The system will not switch to
CD changer mode.
Load an audio CD into the
CD changer (
page 61).
The
CDC
soft key will only be visible if a
CD changer is connected.

67 Audio
CD changer* operation
1CD name or CD number
2Track title or track number
3Elapsed track playing time
4Track number/Total tracks
The CD changer menu shows the
CD title at the top and track title in the cen-
ter of the main area if the CD contains cor-
responding text data.
If the CD does not contain any CD text da-
ta, the number of the CD and the track
number are displayed instead of the name
of the CD and the track title. The numbers 1 through 6 are assigned to
the CD compartments of the CD changer.
The following options are available:

Selecting via CD list

Selecting via direct entry of the CD
number (
page 68)

Selecting via CD Selection menu
(page 68)
Selecting via CD list
The CD list contains all loaded CDs. Only
one entry is visible at a time. Its name or
number is shown at top of the CD changer
main menu (here CD 5).The entry appears above the track display.
It shows the number of the current CD.

Use or  to select another CD
from the list.

Wait approx. 3 seconds without chang-
ing the selection.
The CD is changed. The newly selected
CD is played.
Selecting CDsiThis selection is possible only if two or
more audio CDs are loaded.
iThe system will skip empty CD changer
compartments.

68 AudioCD changer* operationSelecting via direct entry of the CD
number 
Press one of the
-  keys.
The CD changer switches to the CD
loaded in the appropriate CD changer
compartment.
Selecting via CD Selection menu

Press the
Magaz.
soft key.
The CD Selection menu appears. You
see the list of all six compartments.An entry shows the CD title if the CD
contains corresponding CD text data.
No text displayed with a CD symbol in-
dicates that the corresponding CD
does not contain any CD text data
An entry shaded out indicates an emp-
ty CD changer compartment.

Use or  to select a CD.
The system will skip empty CD
changer compartments

Press.
The newly selected CD is played.
The following options are available:

Selecting via track skip

Selecting via track list (
page 69)

Selecting via manual entry of the track
number (
page 69)

Selecting via scan search (
page 70)
Selecting via track skip
On the COMAND control unit

Open the CD changer main menu
(page 66).

Pressfor forward skipping.
or

Press for backward skipping.
iThe CD fails to be changed if you select
an empty compartment.
Selecting a track

69 Audio
CD changer* operation
On the multifunction steering wheel
Switch the multifunction display in the
instrument cluster to the CD changer
display (
page 25).

Pressj for forward skipping.
or

Pressk for backward skipping.Selecting via track list
The track list contains all tracks of the cur-
rent CD. Only one list entry is visible at a
time, it is the track currently playing.

Use or  to select another track
from the list.

Press or wait approx. 3 seconds
without changing the selection.
The selected track is played.Selecting via manual entry of the track
number

Open the CD changer main menu
(page 66).

Press.
The Manual track input display ap-
pears. The number of tracks on the CD
is displayed.
Entry example: Track 1

Press
.
iForward skipping:
The next track is played.
Backward skipping:
The system skips back to the beginning
of the track if more than approx. 10
seconds playing time of the track cur-
rently playing have elapsed.
The system skips back to the beginning
of the previous track if less than 10
seconds playing time of the track cur-
rently playing have elapsed.


70 AudioCD changer* operationEntry example: Track 12
Press
and ! in quick succession.

Wait approx. 3 seconds after entering
the number.
The selected track is played. The CD
main menu appears.
Selecting via scan search
Scan search is characterised as follows:

Scan search plays each track on the
current CD for approx. 8 seconds.

Scan search can be ended manually.

Scan search automatically stops at the
track listened to before the scan
search was started.Starting scan search

Press the
Scan
soft key.
Ending scan search manually

Press the
Scan
soft key.
The track playing at the time the scan
is ended remains playing.

Open the CD changer main menu
(page 66).

Press and hold or .

To stop release or ..The following options are available:

Normal sequenceThe tracks are played in the normal se-
quence (e.g. track 1, 2, 3 etc.).
If only one CD is loaded, the last track is
followed by again playing the first track.
If several CDs are loaded in the CD chang-
er, the last track on a CD in the changer
will be followed by the first track of the
next CD in the changer.
The CDs are changed in their normal se-
quence (e.g. CD 1, 2, 3 etc.).

Repeat track

The current track will be repeated until
this function is deactivated.
iEntries beyond the number of available
tracks on the CD are not possible.
iWhen you start the scan search, play-
back option
Normal sequence
is activated
automatically. Therein scan search is
restricted to the current CD.
Fast forward/reverse
Playback options

71 Audio
CD changer* operation

Repeat
CD
The current CD will be repeated until
this function is deactivated.

Random track

The tracks are played in random order
(e.g. track 3, 8, 5 etc.).
If several CDs are loaded in the CD
changer, the last track on a CD in the
changer will be followed by the first
track of the next CD in the changer.
The CDs are changed in their normal
sequence (e.g. CD 1, 2, 3, etc.).

Random CD

At least 4 tracks on one CD are played
in random order (e.g. track 5, 7, 3, 9).
Then, the next CD will be played.
The CDs are changed in random
order (e.g. CD 4, 1, 5, etc.).
Switching the playback option

In the CD changer main menu
(page 66) press the
Setting
soft key.
The Setting menu appears.
The solid circle indicates which op-
tion is currently selected.

Use or  to select a different op-
tion.

Press.
The option is activated. A correspond-
ing display will appear in the status bar
for all options except
Normal
sequence
.
An option will remain activated even if
the COMAND is switched OFF and then
ON again.
iIt is only possible to select this function
if at least two audio CDs are loaded in
the CD changer.
iThis selection is only available if at
least two audio CDs are loaded.

72 AudioAudio AUX operation
Open the Audio main menu
(page 36).

Press the
AUX
soft key.
The AUX menu appears.
The external audio source is made au-
dible, provided it is connected and
switched to playback.In AUX mode, you can adjust the following:

Volume (
page 30)

Fader and balance (
page 31)

Bass and treble (
page 32)

Sound functions (
page 33)
iAn external audio source, for example a
tape player, can be connected to
COMAND.
For further information, please contact
your Mercedes-Benz Center.Switching to AUX mode
iPlease refer to the appropriate operat-
ing manual for the operation of the ex-
ternal audio source.