2005 MERCEDES-BENZ CL600 low beam

374 Practical hintsReplacing bulbsBulbs Front lamps Rear lamps
Lamp
Type
1
Additional turn sig-
nal lamp
LED
2
Turn signal lamp
1156 NA
3
High beam flasher
H7-55 W
4
Side marker lamp
W5W
5
Fog lamp
HB4-55 W
6
Parking and stand-
ing lamp
W5W
7
Low beam and high
beam lamp
Xenon
1
D2S-35 W
1Bi-Xenon headlamps: For safety reasons (high volt-
age), do not replace the Xenon bulb yourself. See
your authorized Mercedes-Benz Center.
Lamp
Type
8
High mounted brake
lamp
LED
9
Brake lamp
LED
a
Tail, parking and
standing lamp
P 21/4 W
Side marker lamp
LED
b
Backup lamp
P21W
c
License plate lamp
C5W
d
Rear fog lamp,
driver’s side
P 21/4 W
e
Turn signal lamp
PY 21 W

376 Practical hintsReplacing bulbsReplacing bulbs for front lamps
Before you start to replace a bulb for a
front lamp, do the following first:
Turn the exterior lamp switch to M
(page 52).

Open the hood (
page 273) (except
for side marker lamps).
1Housing cover for high beam flasher
bulb, parking and standing lamp2Electrical connector for high beam
flasher housing bulb
3Bulb socket for parking and standing
lamp
4Bulb socket for turn signal lamp
5Housing cover for Bi-Xenon headlampBi-Xenon headlamp
Warning!
G
Do not remove the cover for the Bi-Xenon
headlamp. Because of high voltage in Xenon
lamps, it is dangerous to replace the bulb or
repair the lamp and its components. We rec-
om men d t ha t y ou ha ve s uc h w o rk do n e by a
qualified technician.

377 Practical hints
Replacing bulbs
High beam flasher bulb
Press ends of housing cover1 tab to-
gether and remove cover.

Press connector2 downward.

Remove connector2 with the bulb.

Insert the new bulb so that the base lo-
cates in the recess on the holder.

From below, press connector2 with
bulb upward onto the reflector.

Align housing cover1 and click into
place.
Front turn signal bulb

Turn bulb socket4 counterclockwise
and pull out.

Gently push bulb into bulb socket4,
turn counterclockwise and remove.

Insert new bulb in bulb socket4, push
in and twist clockwise.

Reinsert bulb socket4 in lamp and
twist clockwise.Parking and standing lamp bulb

Press ends of housing cover1 tab to-
gether and remove cover.

Pull out the bulb socket3 with the
bulb.

Pull the bulb out of the bulb socket3.

Insert a new bulb in the socket3.

Reinstall the bulb socket3.

Align housing cover1 and click into
place.
Side marker lamp bulb

Carefully slide lamp towards rear.

Remove front end first.

Twist bulb socket counterclockwise
and pull out.

Pull bulb out of the bulb socket.

Insert new bulb in socket.

Reinstall bulb socket, push in and twist
clockwise.

To reinstall lamp, set rear end in
bumper and let front end snap into
place.
Replacing bulbs for rear lamps
Before you start to replace a bulb for a
front lamp, do the following first:
Turn the exterior lamp switch to M
(page 52).

Open the trunk (
page 101).

419 Technical terms
ABC
(A
ctive B
ody C
ontrol)
Active, computer-controlled system
that hydraulically adjusts the suspen-
sion at all four wheels in response to
various driving situations.
ABS
(A
ntilock B
rake S
ystem)
Prevents the wheels from locking up
during braking so that the vehicle can
continue to be steered.
Alignment bolt
Metal pin with thread. The centering
pin is an aid used when changing a tire
to align the wheel with the wheel hub.BabySmart
TM air bag deactivation
system
This system detects if a special system
compatible child restraint seat is in-
stalled on the front passenger seat. The
system will automatically deactivate
the passenger front air bag when such
a seat is properly installed (the
58indicator lamp in the center
console comes on). See an authorized
Mercedes-Benz Center for availability.
BabySmartTM compatible child seats
Special restraint system for children.
The sensor system for the passenger
seat prevents deployment of the pas-
senger front air bag if a BabySmart
TM
compatible child seat is installed. See
an authorized Mercedes-Benz Center
for availability.BAS
(B
rake A
ssist S
ystem)
System for potentially reducing braking
distances in emergency braking situa-
tions. The system is activated when it
senses an emergency based on how
fast the brake is applied.
Bi-Xenon headlamps
Headlamps which use an electric arc as
the light source and produce a more in-
tense light than filament headlamps.
Bi-Xenon headlamps produce low
beam and high beam.
CAC
(C
ustomer A
ssistance C
enter)
Mercedes-Benz customer service cen-
ter, which can help you with any ques-
tions about your vehicle and provide
assistance in the event of a break-
down.

428 IndexBattery, SmartKey with KEYLESS-GO*
Check lamp 99
Checking the battery 99
Replacing 372
Battery, vehicle 281, 386
Charging 387
Disconnecting 387
Reconnecting 388
Reinstalling 387
Removing 387
Bead 309
Bi-Xenon headlamps 419
Block heater (Canada only) 314
Blocking
Rear window operation 78
Brake assist system (BAS) 419
Brake fluid 271, 414
Brake lamp bulbs 374
Brake lamp, high mounted 374Brake pads
Message in display 343
Brakes 260
High-performance brake system (CL 65
AMG only) 261
Warning lamp 327
Break-in period 258
Bulbs, replacing 373
Additional turn signals 374
Backup lamps 374
Brake lamps 374
Fog lamps 374
Front lamps 374
High beam 374
High mounted brake lamp 374
License plate lamps 374, 378
Low beam 374
Parking lamps 374, 377
Rear fog lamp 374, 377, 378
Side marker lamps 374, 377
Standing lamps 374, 377
Tail lamp assemblies 374, 378
Turn signal lamps 374C
CAC (Customer Assistance Center) 419
Calling up
Distronic* settings 149
Maintenance service indicator 316
Range (distance to empty) 151
CAN system 420
Canceling
Cruise control 206
Cargo tie-down hooks 230
Catalytic converter 268
CD changer* 144
CD mode 144
CD operation
Selecting tracks 143
Center console 27
Air bag off indicator lamp 334
Front passenger front air bag off indica-
tor lamp 334
Lower part 28
Upper part 27
Centigrade (°C)
Setting temperature units 156

439 Index
Interior 130
Locator lighting 127
Low beam 125
Manual headlamp mode 126
Night security illumination 127
Parking lamps 125
Rear fog lamp 128
Settings (control system) 157
Trunk 131, 132
Limiting opening height of trunk lid* 102
Limiting the gear range 168
Limp Home Mode 177
Line of fall 422
Loading 229
Cargo tie-down hooks 230
Instructions 229
Roof rack 229
Loading terminology 309
Loading the vehicle 286
Locator lighting 127
Setting 159Lock button 422
Door handle (KEYLESS-GO*) 60
SmartKey 32, 90
SmartKey with KEYLESS-GO* 94
Trunk 99
Lock buttons 32
Locking 57, 90
Central (SmartKey with
KEYLESS-GO*) 97
Fuel filler flap 270
Global, SmartKey 92
Glove box 232
Vehicle in an emergency 368
Vehicle with KEYLESS-GO* 99
Loss of
Mechanical key 94
SmartKey 94
Loss of Smartkey with
KEYLESS-GO* 100
Low beam headlamps
Messages in display 352, 353
Replacing bulbs 374Lowering
Vehicle 384
Lumbar support adjustment 117
M
Main Dimensions 410
Maintenance 12, 315
Maintenance service
Calling up the maintenance service
indicator 316
Overdue 316
Maintenance service indicator
Calling up 316
Clearing 315
Resetting 316
Maintenance System (U.S. vehicles) 422
Manual headlamp mode 126
Manual operations
Fuel filler flap 369
Interior lighting control 131
Locking the vehicle 368
Tilt/sliding sunroof 370
Unlocking the driver’s door 367