2005 MERCEDES-BENZ C COUPE oil temperature

[x] Cancel search: oil temperature

Page 7 of 474

MERCEDES-BENZ C COUPE 2005 CL203 Owners Manual ContentsPanorama roof with power 
tilt/sliding panel* ..............................  241
Opening and closing the roller 
sunblinds for the panorama roof 
with power tilt/sliding panel ........  241
O

Page 129 of 474

MERCEDES-BENZ C COUPE 2005 CL203 Owners Manual 128 Controls in detailControl system
Standard display menu
In the standard display, the main odometer 
and the trip odometer are shown in the 
multifunction display.
1Trip odometer
2Main odometerIf yo

Page 295 of 474

MERCEDES-BENZ C COUPE 2005 CL203 Owners Manual 294 OperationEngine compartmentIf you see the message:Observe waiting time
If engine is at operating temperature, 
wait five minutes before repeating 
check procedure.

If engine is not at operating

Page 365 of 474

MERCEDES-BENZ C COUPE 2005 CL203 Owners Manual 364 Practical hintsWhat to do if …When the message 
At next gas station 
add 1.0 qt engine oil
 (Canada: 
1.0 l
) 
appears while the engine is running and at 
operating temperature, the engine oil l

Page 427 of 474

MERCEDES-BENZ C COUPE 2005 CL203 Owners Manual 426 Technical dataFuels, coolants, lubricants, etc.CapacitiesVehicle components and their respective 
lubricants must match. Therefore use only 
brands tested and approved by 
Mercedes-Benz. Please re

Page 428 of 474

MERCEDES-BENZ C COUPE 2005 CL203 Owners Manual 427 Technical data
Fuels, coolants, lubricants, etc.
Model
Capacity
Fuels, coolants, lubricants, etc.
Fuel tank
including a reserve of
16.4 US gal (62.0 l)
2.1 US gal (8.0 l)
Premium unleaded gasoline

Page 433 of 474

MERCEDES-BENZ C COUPE 2005 CL203 Owners Manual 432 Technical dataFuels, coolants, lubricants, etc.Hot weather performance
At ambient temperatures above 95°F 
(35°C) start times may increase and be 
accompanied by a rough idle following the 
star

Page 439 of 474

MERCEDES-BENZ C COUPE 2005 CL203 Owners Manual 438 Technical termsControl system
The control system is used to call up 
vehicle information and to change 
component settings. Information and 
messages appear in the multifunction 
display. The driv
Page:   1-8 9-16 next >