2005 MAZDA MODEL SPEED MX-5 MIATA ECU

Black plate (43,1)
3Knowing Your Mazda
Explanation of basic operations and controls; opening/closing and adjustment
of various parts.
Doors and Locks ........................................................................... 3-2Keys .......................................................................................... 3-2
Keyless Entry System
í............................................................ 3-3
Door Locks ............................................................................... 3-9
Trunk Lid ................................................................................ 3-11
Inside Trunk Release Handle .................................................. 3-14
Power Windows ...................................................................... 3-15
Fuel-Filler Lid and Cap ........................................................... 3-17
Hood ....................................................................................... 3-18
Convertible Top ...................................................................... 3-20
Detachable Hardtop
í.............................................................. 3-25
Security System ........................................................................... 3-31 Immobilizer System
í............................................................. 3-31
Mirrors ........................................................................................ 3-34 Mirrors .................................................................................... 3-34
3-1íSome models.
MX-5 Miata_8T72-EA-04G_Edition2 Page43
Tuesday, August 31 2004 11:24 AM
Form No.8T72-EA-04G

Black plate (55,1)
To release the trunk lid, pull up on the
trunk lid release lever.
Closing the trunk lid
Use both hands to push the trunk lid down
until the lock snaps shut. Do not slam it.
Pull up on the trunk lid to make sure it is
secure.
qRemote Trunk Lid Release Lock-
Out
The remote release may be canceled to
prevent anyone in the vehicle from
opening the trunk.
Close the trunk, insert the key, and turn it
counterclockwise, then return the key to
the center position and remove it.
To activate the remote release, insert the
key, turn it clockwise and open the trunk
lid at the same time.
NOTE
If the remote trunk lid release does not
work, insert the key and turn it
clockwise.
qTrunk Light
The trunk light is on when the lid is open
and off when it's closed.
NOTE
lTo prevent the battery from being
discharged, do not leave the trunk
open for a long period when the
engine is not running.
lThe trunk and license plate lights
share the same light bulbs.
Knowing Your Mazda
Doors and Locks
3-13
MX-5 Miata_8T72-EA-04G_Edition2 Page55
Tuesday, August 31 2004 11:24 AM
Form No.8T72-EA-04G

Black plate (57,1)
qOpening the Trunk Lid from the
Inside
Pull the illuminated “T ” shaped handle.
The handle is made of material that will
glow for hours in the darkness of the
trunk following a brief exposure to
ambient light.
The “T ” shaped handle is located on the
inside of the trunk end trim.
Handle
CAUTION
Always keep the handle firmly attached
to the holder and in the recessed
position. Not securing the handle this
way could allow it to snag luggage in
the trunk and open the trunk lid.
Power Windows
The ignition switch must be in the ON
position for the power windows to
operate.
WARNING
Closing Power Windows:
Closing power windows are
dangerous. A person's hands, head, or
even neck could be caught by the
window and result in serious injury or
even death.
This warning applies especially to
children. Make sure the opening is
clear before closing a window.
Keys and Children:
Leaving children in a vehicle with the
key is dangerous. This could result in
someone being badly injured or even
killed. They could play with power
windows or other controls, or even
make the vehicle move. Don't leave the
keys in your vehicle with children and
keep them in a place where your
children will not find or play with
them.
Knowing Your Mazda
Doors and Locks
3-15
MX-5 Miata_8T72-EA-04G_Edition2 Page57
Tuesday, August 31 2004 11:24 AM
Form No.8T72-EA-04G

Black plate (60,1)
qFuel-Filler Cap
To remove the filler cap, turn it
counterclockwise.
To close the filler cap, turn it clockwise
until it clicks.
Open
Close
CAUTION
Make sure the fuel-filler cap is
tightened securely. The check engine
light may illuminate on when the cap
isn't tightened securely. If the light
remains on (even after you have
tightened the cap securely, driven, and
restarted the engine several times), it
may indicate a different problem.
Contact an Authorized Mazda Dealer as
soon as possible.
Hood
WARNING
Closed and Securely Locked Hood:
A hood that is not closed and securely
locked is dangerous as it could fly
open while the vehicle is moving and
block the driver's vision which could
result in a serious accident. Always
check that the hood is closed and
securely locked.
qOpening the Hood
1. With the vehicle parked, pull the
release handle to unlock the hood.
Release handle
2. Pull the hood latch up and lift the hood.
3-18
Knowing Your Mazda
Doors and Locks
MX-5 Miata_8T72-EA-04G_Edition2 Page60
Tuesday, August 31 2004 11:24 AM
Form No.8T72-EA-04G

Black plate (61,1)
3. Use the support rod to hold the hoodopen.
Clip
Support rod
qClosing the Hood
1. Check under the hood area to make
certain all filler caps are in place and
all loose items (e.g. tools, oil
containers, etc.) have been removed.
2. Insert the support rod in its clip while holding up the hood. Verify that the
support rod is secured in the clip before
closing the hood.
3. Close the hood so that it locks securely.
Knowing Your Mazda
Doors and Locks
3-19
MX-5 Miata_8T72-EA-04G_Edition2 Page61
Tuesday, August 31 2004 11:24 AM
Form No.8T72-EA-04G

Black plate (63,1)
lBefore lowering or raising the top, stop
in a safe place off the right-of-way and
park on a level surface.
lMake sure nothing is on the top or near
the back window when raising or
lowering the top.
Even small objects may interfere and
cause damage.
lWhen lowering the top, make sure
objects inside the vehicle aren't blown
away by the wind.
lSecure all loose objects inside before
driving with the top down.
lTo help prevent burglary or vandalism
and to ensure that the passenger
compartment stays dry, close the top
securely and lock all doors when
leaving the vehicle.
lDon't drive through an automatic car
wash; it may damage the top.
lDon't raise or lower the top when the
temperature is below 5 °C (41 °F) ; this
will damage the top material.
lDon't lower the top when it's wet. If the
top dries while folded, it will
deteriorate and shrink.
lLowering the top while it's wet can
also cause water to drip into the
passenger compartment.
lDon't raise or lower the top when the
wind is strong; the wind could damage
the top.
qLowering the Convertible Top
1. Park the vehicle on a level surface and
firmly set the parking brake.
2. Lower the side windows, then turn off the ignition. 3. Pull down the sunvisors.
Sunvisor
Sunvisor
4. Remove all objects in the top storage
area.
WARNING
Objects in the Storage Area:
Putting heavy or sharp objects in the
top storage area is dangerous.
During a sudden stop or collision, they
can become projectiles that might hit
and injure passengers.
Don't place heavy or sharp objects in
the top storage area.
5. Push the unlock buttons and fully release the top latches.
Unlock button
Top latch
Knowing Your Mazda
Doors and Locks
3-21
MX-5 Miata_8T72-EA-04G_Edition2 Page63
Tuesday, August 31 2004 11:24 AM
Form No.8T72-EA-04G

Black plate (64,1)
6. Lift up on the front section of the top torelease it from the windshield header.
Windshield header
7. Fold back the front and carefully lower
it to the storage area, then put the
latches in the locked position.
qCovering the Convertible Top
1. Cover the convertible top with the top
covering, stored in the trunk.
2. Feed the straps on the bottom of the covering through the lower links and
snap them into position.
Top covering
Link Strap
3. Secure the top covering with the straps.
4. Affix the top covering fasteners.
5. Insert the top covering's rear edge into
the groove in the body molding.
Top covering
Body
Molding
CAUTION
Never drive with the top partially
folded or uncovered. Otherwise the top
and/or the top covering could be
damaged.
3-22
Knowing Your Mazda
Doors and Locks
MX-5 Miata_8T72-EA-04G_Edition2 Page64
Tuesday, August 31 2004 11:24 AM
Form No.8T72-EA-04G

Black plate (65,1)
qRaising the Convertible Top
1. Park the vehicle on a level surface and
firmly set the parking brake.
2. Lower the side windows, then turn off the ignition.
3. Pull down the sunvisors.
Sunvisor Sunvisor
4. Undo the fasteners and straps.
5. Remove the top covering and store it
properly in the trunk.
6. Unlock the top latches and open them fully.
7. Hold the top lift handle and pull the top up and forward until it's against the
windshield header.
Windshield header
8. After securely hooking the top latchesonto the windshield header, push each
latch up with the palm of your hand
until the lock buttons click and the
latches are locked.
CAUTION
Make sure the top is securely locked by
pushing up on it.
Driving with the top unlocked could
damage the top.
NOTE
Make sure the top is securely locked by
pushing up on it. If it still sounds loose
(rattles) after being locked by the top
latches, have it inspected at an
Authorized Mazda Dealer.
Knowing Your Mazda
Doors and Locks
3-23
MX-5 Miata_8T72-EA-04G_Edition2 Page65
Tuesday, August 31 2004 11:24 AM
Form No.8T72-EA-04G