2005 MAZDA MODEL RX 8 remote control

Black plate (153,1)
WARNING
Safety Stop and Reverse Feature:
Using the HomeLink system with any
garage door opener that lacks the
safety stop and reverse feature as
required by federal safety standards is
dangerous. (This includes garage
doors manufactured before April 1,
1982.)
Using these garage door openers can
increase the risk of serious injury or
death. For further information,
contact HomeLink at 1-800-355-3515
or www.homelink.com or your
Authorized Mazda Dealer.
Safety While Programming or
Operating HomeLink System:
Programming or operating the
HomeLink system without verifying
the safety of areas surrounding garage
doors and gates is dangerous and
could result in an unexpected accident
and serious injury if someone were to
be hit. Always check the areas
surrounding garage doors and gates
for people or obstructions before
programming or during operation of
the HomeLink system.
CAUTION
HomeLink has been tested and
complies with FCC and Industry
Canada rules. Changes or modifications
not expressly approved by the party
responsible for compliance could void
the user's authority to operate the
device.
NOTE
FCC ID: NZLSTDHL3
CANADA:4112104541A
This device complies with FCC rules
part 15. Operation is subject to the
following conditions:
1- This device may not cause any
harmful interference and
2- This device must accept any
interference that may be received
including interference that may cause
undesired operation.
NOTE
The programming will not be erased
even if the battery is disconnected.
qPre-programming the HomeLink
System
NOTE
It is recommended that a new battery be
placed in the hand-held transmitter of
the device being programmed to
HomeLink for quicker training and
accurate transmission of the radio-
frequency signal.
lVerify that there is a remote control
transmitter available for the device you
would like to program.
lDisconnect the power to the device.
Driving Your Mazda
Switches and Controls
5-57
RX-8_8T69-EA-04G_Edition1 Page153
Wednesday, June 9 2004 2:12 PM
Form No.8T69-EA-04G

from
satellites
ended
gation
igation
stem does
operation
aused by TECH has
roduct.
Map Related Issues
Customer ServiceIf you need help with the operation your Mazda navigation system,
want to report a map database error or wish to obtain a new map
DVD, please call 1-888-NAV-MAPS (1-888-628-6277).
Latest map DVDMap content is constantly changing due to the addition of new roads,
points of interest, traffic restrictions, etc. While every effort is made
to supply the most accurate DVD map, it is not always possible for
the DVD map to match the current roadways. Not all map areas are
covered to the same level of detail. Some areas that include private
roads may not be included on the database. Map DVD's are updated
on a regular basis to check availability, please call
1-888-NAV-MAPS (1-888-628-6277).
Before Use
Please have the map and software version numbers available in advance.
This information can be found by using the following procedure:
Notes
Press on the remote control.
Use the remote control joystick to scroll through the
menu options, select and press
Map and software versions are now displayed.Select and press
Select and press
For further assistance please refer to pages 30 in the
instruction book.
9
ENTER
ENTER
MENU
ENTER

33
Open the
[System Setup]
screenVolume control (5 levels)
Beep

On : Beep activated when pressing buttons in the
remote control.

Off : Beep inactivated when pressing buttons in the
remote control.

On : Activates voice feedback.
Off : Cancels voice feedback.
Language
Changeover meter/mile

Metric : Meters
English : Miles
Voice Feedback*
Clock
: Default
How to exit
Daylight Saving Time(Summer Time)

On : Daylight saving time mode is enabled.
(The navigation internal clock gains 1 hour).

Off : Daylight saving time mode is disabled.
SetupSystem
User setting
1
2select3
selectMENUENTER
ENTER
ENTER
ENTERENTER
ENTER
ENTER
ENTER
Sets the volume for voice guidance and voice feedback*.
When the volume is set to 0, the voice is turned off.
* The operation status is announced by voice.
(e.g. changing the map orientation, starting or terminating
the route calculation, staring or terminating the simulation,
displaying the maneuver list.)
nt go back
om it.
atically
proaching
ENTER

39

GPS signals may not be received because of obstructions.
After moving the vehicle away from obstructions, the GPS
signals can be received.

Check if the mode is set to the map mode.
aPress

Check if the volume control for the voice guidance is
adjusted to zero.

Check if the vehicle is off the route.
aRepeat the route search while checking the route guide
screen.

Check if you are driving the vehicle in the wrong direction on
the route.
aRepeat the route search checking the direction of the
destination.

Check if [Beep] is set to [Off] ( page 33).

Check if the disc is wet, scratched, or dewy.
SymptomCheck point
No GPS symbols
are displayed
The vehicle
position is not
displayed
No voice guidance
Buttons in the
remote control
do not beep
No map displayed(blank screen)
As necessary
POS
d this
ed Mazda
low.
was set to
king lot.
her such
ceiving
First