2005 MAZDA MODEL MPV belt

Black plate (34,1)
qHead Restraint
WARNING
Head Restraints Adjustment:
Driving with the head restraints
adjusted too low or removed is
dangerous. With no support behind
your head, your neck could be
seriously injured in a collision. Always
drive with the head restraints inserted
when seats are being used and make
sure they are properly adjusted.
Height adjustment
To raise a head restraint, pull it up to the
desired position.
To lower the head restraint, press the stop-
catch release, then push the head restraint
down.
Adjust the head restraint so that the top is
parallel with the top of the passenger's
ears, never the passenger's neck.
Removal
To remove the head restraint, press the
stop-catch release, then pull up on the
head restraint.
qFolding the Third-Row Seat
WARNING
Riding on Folded Flat Third-Row
Seat:
Riding on the third-row seat when it's
folded is dangerous. During sudden
braking or a collision, passenger's
could be thrown around inside the
vehicle and seriously injured. Always
ride with the third-row seat in the
forward-facing, upright position and
seat belt securely fastened.
2-22
Essential Safety Equipment
Seats
Mazda MPV_8T50-EA-04G_Edition1 Page34
Monday, June 28 2004 3:59 PM
Form No.8T50-EA-04G

Black plate (35,1)
1. Remove the head restraints from the
third-row seat (page 2-22).
2. Pull the third-row seat's flat-folding
strap and push the seatback down until
it locks.
qStowing the Third-Row Seat
More storage space can be created by
folding away the third-row seat into the
rear seat well. With the second-row seats
removed and the third-row seat stowed,
even more space is available.
WARNING
Riding in the Seat Well:
Riding in the seat well for the third-
row seat is dangerous. Sudden
braking or a collision could cause
serious injury. Do not sit or lie in the
seat well while the vehicle is moving.
Never ride in a vehicle where you
can't sit in the seat and wear the seat
belt.
WARNING
Pinching Fingers or Hands:
Placing your hands around the seat
stowage well when stowing the third-
row seat is dangerous. You could
pinch your hands or fingers between
the seat and the well. Hold the handle
when lowering the seat into place.
Never place your hands between the
seat and the seat well.
Unlocked Seatback:
An unlocked seatback is dangerous.
While stowing the seat, the seatback
could suddenly move causing serious
injury. Push the seatback forward and
backward to make sure it is locked in
place.
NOTE
Remove any items from the seat well
for the third-row seat before stowing the
seat. Anything in the baggage area
when the seat is set into the well can
damage the seatback material and
prevent a flat cargo area.
Essential Safety Equipment
Seats
2-23
Mazda MPV_8T50-EA-04G_Edition1 Page35
Monday, June 28 2004 3:59 PM
Form No.8T50-EA-04G

Black plate (36,1)
Stowing the third-row seat
1. Insert the seat belts in the retainers.
2. Remove the head restraint and set them
aside temporarily (page 2-22).
3. Pull strap A and ease the seatback
toward the front of the vehicle with
your other hand and be sure it locks
with a click.
Strap A
4. Pull strap B and lift the combined
seatback and seat bottom up to vertical
with your other hand. Gently lower the
seat into the seat well.
Strap B
5. Insert the head restraints between the
floor and seat at the positions indicated
on the labels.
Labels
Raising the third-row seat upright for
road use
1. Clear the entire cargo floor.
2-24
Essential Safety Equipment
Seats
Mazda MPV_8T50-EA-04G_Edition1 Page36
Monday, June 28 2004 3:59 PM
Form No.8T50-EA-04G

Black plate (37,1)
2. Remove the head restraints.
3. Carefully reverse the procedures used
to lower the seat into the seat well. Use
the handle and ease the combined
seatback and seat bottom up to vertical.
4. Carefully lower the seat forward and
make sure it's latched to the floor.
5. Pull strap A and raise the seatback
upright. Attempt to move the seatback
forward and backward to make sure it
is locked.
Strap A
6. Insert the head restraints.
7. Place the seat belt buckles face up.
Essential Safety Equipment
Seats
2-25
Mazda MPV_8T50-EA-04G_Edition1 Page37
Monday, June 28 2004 3:59 PM
Form No.8T50-EA-04G

Black plate (39,1)
7. Remove the support bar from the
pocket.
8. Set the hook on the support bar in the
rear of the seatback.
9. Pull the seatback towards the front of
the vehicle until the opposite end of the
support bar hooks onto the anchor loop
in the side trim. Attempt to push the
seatback towards the rear (liftgate) to
make sure the support bar is securely
latched.
To return the third-row seat to the road
position (forward facing)
1. Make sure to stow the shoulder belts
away from the seat bottom as it is
lowered.
2. Detach the support bar by following
the reverse procedure for installation.
Essential Safety Equipment
Seats
2-27
Mazda MPV_8T50-EA-04G_Edition1 Page39
Monday, June 28 2004 3:59 PM
Form No.8T50-EA-04G

Black plate (40,1)
3. From inside the vehicle, carefully
lower the seat towards the front until it
locks in place. Attempt to move the
seat forward and backward to make
sure it's securely locked in place.
4. Reinsert the head restraints.
5. Place the seat belt buckles face up.
6. Fasten the shoulder belts and check
that they are routed properly for
passenger use.
Flat Folding
All seats can be folded down for use as
beds when the vehicle is safely parked.
WARNING
Folded-Flat Seats:
Sitting or lying on seats folded flat is a
dangerous way to ride. During sudden
braking or a collision you could be
thrown around inside the vehicle and
seriously injured. Don't ride on
seatbacks folded flat.
qTo Fold the Seats Flat
1. Slide the second-row seat all the way
back (page 2-13).
2. Fold down the second-row seatbacks
rearward until they lock (page 2-14).
3. Remove the head restraints from the
front seats. Refer to Head Restraint
(Manually Operated Seats)(page 2-5).
Refer to Head Restraint (Electrically
Operated Seats)(page 2-10).
2-28
Essential Safety Equipment
Seats
Mazda MPV_8T50-EA-04G_Edition1 Page40
Monday, June 28 2004 3:59 PM
Form No.8T50-EA-04G

Black plate (42,1)
Seat Belt Precautions
Seat belts help to decrease the possibility of severe injury during accidents and sudden
stops. Mazda recommends that the driver and all passengers always wear seat belts.
All of the outboard seat belt retractors are designed to keep the lap/shoulder belts out of the
way when not in use.
The driver's seat belt has no provisions for child-restraint systems and has only an
emergency locking mode. The driver may wear it comfortably, and it will lock during a
collision.
However, the front passenger's seat and all rear outboard lap/shoulder belt retractors
operate in two modes: emergency locking mode, and for child-restraint systems, automatic
locking mode. While we recommend you put all children in the rear seats, if you must use
the front passenger seat for a child, slide the front passenger seat as far back as possible and
make sure the child-restraint system is secured properly.
The third-row center seat positions have a lap belt with manual adjustment.
2-30
Essential Safety Equipment
Seat Belt Systems
Mazda MPV_8T50-EA-04G_Edition1 Page42
Monday, June 28 2004 3:59 PM
Form No.8T50-EA-04G

Black plate (43,1)
WARNING
Not Wearing Seat Belts:
Not wearing a seat belt is extremely dangerous. During a collision, occupants not
wearing seat belts could hit someone or things inside the vehicle or even be thrown out
of the vehicle. They could be seriously injured or even killed. In the same collision,
occupants wearing seat belts would be much safer. Always wear your seat belt and
make sure all occupants are properly restrained.
Seat Belt Damaged During an Accident:
Using a damaged seat belt is dangerous. An accident could damage the belt webbing
of the seat belt in use. A damaged seat belt cannot provide adequate protection in a
collision. Whether a front seat was occupied or not, if the front air bags deployed the
seat belt pretensioners also deployed and both front seat belts must be replaced. Have
an Authorized Mazda Dealer inspect all seat belt systems in use during an accident
before they are used again.
Twisted Seat Belts:
Twisted seat belts are dangerous. In a collision, the full width of the belt isn't available
to absorb the impact. This puts more force on the bones beneath the belt, which could
cause serious injury or death. Don't wear twisted seat belts.
One Belt, One Passenger:
Using one seat belt for more than one person at a time is dangerous. A seat belt used
in this way can't spread the impact forces properly and the two passengers could be
crushed together and seriously injured or even killed. Never use one belt for more
than one person at a time.
CAUTION
Belt retraction may become difficult if the belts and rings are soiled, so try to keep them
clean.
Essential Safety Equipment
Seat Belt Systems
2-31
Mazda MPV_8T50-EA-04G_Edition1 Page43
Monday, June 28 2004 3:59 PM
Form No.8T50-EA-04G