2005 MAZDA MODEL B2300 TRUCK transmission

[x] Cancel search: transmission

Page 203 of 257

MAZDA MODEL B2300 TRUCK 2005  Owners Manual (in English) While operating your vehicle
•Note any changes in the sound of the exhaust or any smell or exhaust
fumes in the vehicle.
•Check for vibrations in the steering wheel. Notice any increased
steering

Page 204 of 257

MAZDA MODEL B2300 TRUCK 2005  Owners Manual (in English) •Check cooling system fluid level and verify coolant specific gravity is
correct for summer or winter conditions.
•Check battery water level (non-maintenance free).
•Check battery connections an

Page 205 of 257

MAZDA MODEL B2300 TRUCK 2005  Owners Manual (in English) Working with the engine on
•Automatic transmission:
1. Set the parking brake and shift to P (Park).
2. Block the wheels.
•Manual transmission:
1. Set the parking brake, depress the clutch and plac

Page 206 of 257

MAZDA MODEL B2300 TRUCK 2005  Owners Manual (in English) IDENTIFYING COMPONENTS IN THE ENGINE COMPARTMENT
2.3L I4 engine
1. Windshield washer fluid reservoir
2. Engine coolant reservoir
3. Engine oil dipstick
4. Transmission fluid dipstick (automatic transm

Page 207 of 257

MAZDA MODEL B2300 TRUCK 2005  Owners Manual (in English) 3.0L V6 engine
1. Engine coolant reservoir
2. Windshield washer fluid reservoir
3. Engine oil filler cap
4. Transmission fluid dipstick (automatic transmission)
5. Engine oil dipstick
6. Brake fluid r

Page 208 of 257

MAZDA MODEL B2300 TRUCK 2005  Owners Manual (in English) 4.0L SOHC V6 engine
1. Windshield washer fluid reservoir
2. Transmission fluid dipstick (automatic transmission)
3. Engine oil filler cap
4. Engine oil dipstick
5. Brake fluid reservoir
6. Power distr

Page 210 of 257

MAZDA MODEL B2300 TRUCK 2005  Owners Manual (in English) ENGINE OIL
Checking the engine oil
Refer to the service maintenance section for the appropriate intervals for
checking the engine oil.
1. Make sure the vehicle is on level ground.
2. Turn the engine o

Page 217 of 257

MAZDA MODEL B2300 TRUCK 2005  Owners Manual (in English) 2. Put the gearshift lever in P (Park), turn off all accessories and start
the engine.
3. Run the engine until it reaches normal operating temperature.
4. Allow the engine to idle for at least one min
Page:   < prev 1-10 ... 9-16 17-24 25-32 33-40 41-48 49-56 next >