DRIVER CONTROLS
Always check the Owner’s Manual for more operating information and safety features
Driver
Controls
Switches
Quick Tips 2005 Mazda6 page 8
page 9
12
12
R
E
A
R
Wiper/washer control leverIntermittent wiper: One click down
To change interval speed:
Rotate inner ring (1)
Normal wiper speed: Two
clicks down
Fast wiper speed: Three clicks down
Single wipe: Push stalk up
Washer: Pull stalk back
Turn signal/lighting
control lever
OFF= Lights off
= Tail, parking and
dashboard lights on: Rotate
knob (1) to first notch
= Tail, parking, dashboard
and headlights on: Rotate
knob (1) to second notch
High beams on/off: Push lever
forward/pull back to detent
To flash high beams: Pull lever
back slightly and release
Turn signals right/left: move
lever up/down
= Fog lights on: Rotate knob
(
2); functions only with headlight
low beams on
Tip: Headlights switch off auto-
matically within 30 seconds if
lights are left on and switch is
in lock position or key removed
Rear window wiper/washer
(5-Door/Sport Wagon)
To activate rear interval wiper:
Rotate knob (2) up to INT
To activate rear normal speed
wiper: Rotate knob (2) up to ON
To activate rear washer: Rotate
knob (2) up for wiper/washer;
down for washer only;
release to stop
Power window switches
Ignition switch must be in ON
position
All windows controlled from the
driver’s armrest; passenger doors
have separate switchesDriver’s window
One-touch-down: Push
down AUTO switch (3) firmly
and release, window goes down
all the way; pull switch back
briefly to stop; press lightly
and hold for normal operation
Passenger window switches
Push switch (4) down and
hold to open; pull back
and hold to close
Power window lockout
switch
Press button (5) down until clicks,
only driver’s window operates;
press again and passenger
windows function again
*Denotes optional equipment
AUT
O5
4
3LR
2
1
Dual power mirrors
Ignition switch must be in ACC
or ON position
Switch is on driver’s door
To adjust left/right mirror:
Press selector switch (1) left/right,
press switch (2) in direction of
desired movement
Tip: To lock mirrors in place,
move selector switch (1) to
center position
