SEATS
Always check the Owner’s Manual for more operating information and safety features
Seat controls
1. Fore-aft adjustment
Lift lever and hold, slide seat,
release lever
2. Raise/lower seat
(Driver’s seat only)
Pull/push lever and release
3. Seat back angle
To adjust: Lift and hold lever,
lean forward or backward
to tilt seat, release lever4. Lumbar support
adjustment*
(Driver’s seat only)
Pull lever forward
5. Head restraint
To raise/lower: Pull up/hold
release button (6) and
push down
Tip: Side-impact air bags*
deploy from outboard
side of front seatbacks
Seats
Seats
Quick Tips Mazda MAZDA3 page 14
page 15
*If equipped
Shoulder belt
height
adjustment
To raise/
lower belt:
Pull button (7),
slide up/down,
release button
WARNING: Make sure
adjuster locks in one of
its positions
Safety belt emergency
locking mode
Belts lockonly on hard acceleration,
braking, cornering or impacts of
about 5 mph or more
Automatic locking mode
(front passenger and all
rear safety belts only)
Must be used when installing
child-safety seat
To activate: Pull webbing fully
out of retractor until click is heard;
belt will only tighten
To disengage: Unbuckle belt and
allow webbing to retract fullyWARNINGS: Do not adjust
seats while driving
Safety belts must always be
worn when vehicle is in motion
Air bags are supplemental
and do not replace safety
belt usage
Always wear your safety belt
and properly secure children
12 and under in the rear seat
Never place rear-facing
infant-safety seat in front
of any air bag, an infant is
in serious danger of being
injured or killed
If you must install a forward-
facing child-safety seat in the
front seating position, move
vehicle seat as far back as possible
4
6
21
3
5
7
SEATS
Always check the Owner’s Manual for more operating information and safety features
1. Air flow selections
= air to dash
= air to dash and floor
= air to floor
= air to floor and windshield
= defrost, air to windshield
2. Fan control
Rotate knob right/left to
increase/decrease speed, turn
to 0to shut system off
3. Temperature control
Rotate knob to blue for cool,
red for warm
4. Air Conditioning*
Press to activate/deactivate
Tip: Floor position
and both defrost positions
/ : A/C turns ON, air
intake switches to fresh air
5. Air Intake Control
Push switch to select
= recirculate inside air;
use for maximum heating/
cooling or to keep odors out
= fresh air
WARNING: Do not use
position in cold weather;
windows will fog and
hamper vision
6. Rear window defogger
Press to activate/deactivate
Child-safety seat
To install in rear outboard
seats: Use dual locking mode
retractor seat belts; see
Owner’s Manual for proper
installation and child seat
tether and LATCH system
instructions
Control positions for
maximum defrost
Fan to maximum, temperature to
maximum hot, air flow selector
knob to
Tips: When selected, air is
dried when temperature is
above 39°F
To prevent moisture buildup,
never drive with system off
Objects placed under the front
seats may interfere with air
flow to the rear
WARNING: Use age
appropriate child restraints,
see Owner’s Manual and
state or province laws
Seats
Climate
Controls
Quick Tips Mazda MAZDA3 page 16
page 17
MODE
04132
A/C
546
123
*If equipped
Split fold-down
rear seatbacks
To fold: Push release knob (1),
push seatback down
To return and lock: Push
seatback firmly until latched,
make sure seatbelts are returned
to original positionsTip: 4-Door has seatback
locks as part of trunk
security
11