2005 LINCOLN AVIATOR window

[x] Cancel search: window

Page 125 of 368

LINCOLN AVIATOR 2005  Owners Manual An auxiliary power point is located
on the lower rear side of the center
console. The power point is
accessible from the rear seats.
Another auxiliary power point is
located on the right rear quarter

Page 126 of 368

LINCOLN AVIATOR 2005  Owners Manual The power window switches located
on the center console are called
push-pull switches.
A. Drivers side
B. Window lock
C. Front passenger side
D. Left and right rear passenger
The following views are t

Page 127 of 368

LINCOLN AVIATOR 2005  Owners Manual The following view is the power
window switch on the rear door trim
panels.
•Press and hold the top or bottom
of the rear rocker switches to
open or close.
One touch up or down
This feature is prese

Page 128 of 368

LINCOLN AVIATOR 2005  Owners Manual Bounce-Back
When an obstacle has been detected in the window opening as the
window is moving upward, the window will automatically reverse
direction and move down. This is known as“bounce-back”. I

Page 130 of 368

LINCOLN AVIATOR 2005  Owners Manual Heated outside mirrors
Both mirrors are heated
automatically to remove ice, mist
and fog when the rear window
defrost is activated.
Do not remove ice from the
mirrors with a scraper or
attempt to read

Page 155 of 368

LINCOLN AVIATOR 2005  Owners Manual POSITIVE RETENTION FLOOR MAT
Position the driver floor mat so that
the eyelet is over the pointed end of
the retention post and rotate
forward to lock in. Make sure that
the mat does not interfere wit

Page 156 of 368

LINCOLN AVIATOR 2005  Owners Manual Always close liftgate window before opening liftgate. Liftgate
glass and liftgate should never be open at the same time. Failure
to observe this warning may result in personal injury or damage to
your

Page 158 of 368

LINCOLN AVIATOR 2005  Owners Manual KEYS
One key operates all the locks and starts the vehicle. Always carry a
spare key with you in case of an emergency.
Your keys are programmed to your vehicle; using a non-programmed key
will not per