AUDIO
287
Rear controller (some models)
The rear controller is installed in the armrest of the rear
center seat so that you can operate the audio system in
the rear seat.
20L132c
“POWER” button: Use this button to turn the system on and
off.
“MODE” button: Use this button to change the mode. If a
tape or CD is not inserted, the “T APE” or “CD” mode is skipped.
You can lock the button operation. To activate the lock, push
and hold the “MODE” button until you hear a beep. “LOCK”
appears on the display. All the buttons in the rear controller are
inoperative. To cancel it, push and hold the “MODE” button
until you hear a beep again. You can use all the buttons.
“VOL” button: Use this button to adjust the volume. (a) When the radio mode is selected
“CH”
button: Push the “CH” button to select a station preset
on the preset button of the front audio system. Each push of
the button changes to the station with higher numbered preset
button.
”
“ button:
Push this button for manual tuning or seek
tuning.
Push this button briefly. Each time you push the button, the
radio will step up or down to another frequency.
Push this button and hold it until you hear a beep. The radio
will begin seeking up or down for a station, and will stop on
reception. Each time you push the button, the stations will
be searched out one after another.
(b) When the “TAPE” mode is selected
The applicable functions are shown in the lowest part of
the display. Push the switch just below to turn on each
function. In the “CD” mode, “DISC” and “TRACK” are
displayed.
“CH” button: Push this button to select the other side of a
cassette tape.
”
“ button:
Push the left or right side to skip forward or
backward to locate the song you want to hear. For details, see
“Automatic program selection” on page 280.
