Page 30 of 539

KEYS AND DOORS
11
A transponder chip for the engine immobilizer system has
been placed in the master and valet keys. These chips are
required for the
system to function correctly, so be careful not
to lose these keys. If you make your own duplicate key, you
will not be able to cancel the system or start the engine.
To protect items locked in the trunk or glove box when using
valet parking, leave the valet key with the attendant.
Since the doors and the trunk lid can be locked without a key,
you should always carry a spare master key in case you
accidentally lock your keys inside the vehicle.
If you should lose your keys or if you need additional keys,
duplicates can be made by a Lexus dealer using the key
number.
We recommend writing down the key number and storing it in
a safe place.
Flat keys
11L250
1 Mechanical flat key 2Engine start flat key
A mechanical flat key and an engine start flat key are
included in the key case. Both flat keys are not equipped
with smart key system.
The mechanical flat key works in every lock, but cannot
be used to start the engine.
As a transponder chip is built in the engine start flat key,
you can start the engine only with this key.
A transponder chip for the engine immobilizer system has
been placed in the engine start flat key. This chip is required
for the system to function correctly, so be careful not to lose this
key. If you make your own duplicate key, you will not be able
to cancel the system or start the engine.
Insert your flat key plates in its key case as shown. We
recommend that you always carry this with you for emergency
use. Do not leave it in your vehicle.
Page 31 of 539
KEYS AND DOORS
12
Starting the engine using an engine start flat
key
11L251a
1. Remove the engine start flat key from the key case.
2. Insert it into the ignition switch.
The flashing security indicator light goes out. This means the
engine immobilizer system is automatically canceled. (For
details, see “Engine immobilizer system” on page 17.)
NOTICE
Do not let the key case become bent as the flat keys
may fall out or become bent also.
The flat keys are designed for emergency use only, so
do not use them regularly instead of the other master
keys.
11L220
NOTICE
When using a key containing a transponder chip,
observe the following precautions:
When starting the engine, do not use the key with a
key ring resting on the key grip and do not press the
key ring against the key grip. Doing so may prevent
the engine from starting, or may cause the engine to
stop soon after it starts.
Page 32 of 539

KEYS AND DOORS
13
11L221
When starting the engine, do not use the key in
proximity with other transponder keys (including the
flat key and keys of other vehicles), and do not press
other key plates against the key grip. Doing so may
prevent the engine from starting, or may cause the
engine to stop soon after it starts. If this happens,
remove the key once and then insert it again after
removing other transponder keys (including the flat
key and keys of other vehicles) from the ring or while
gripping or covering them with your hand to start the
engine.
11L241a
Do not bend the key grip or flat keys.
Do not cover the key grip or engine start flat key with
any material that cuts off electromagnetic waves.
Do not knock the key or flat keys hard against other
objects.
Do not leave the key or flat keys exposed to high
temperatures for a long period, such as on the
dashboard or hood under direct sunlight.
Do not put the key or flat keys in water or wash it in
an ultrasonic washer.
Do not use the key or engine start flat key with
electromagnetic materials.
Page 33 of 539