GAUGES, METERS AND SERVICE REMINDER INDICATORS
75
MULTI±INFORMATION DISPLAY
13PY018
1ªMODEº button2ªº button
3ªº button4ªRESETº button
The multi±information display provides various
information, including clock, outside temperature, and
your vehicle's driving condition.
When the ignition switch is on, the last previously used mode
displayed just before the ignition switch is off will appear.
If the electrical power source has been disconnected from the
multi±information display, the display will automatically be set
to the initial mode.
When the instrument panel lights are turned on, the brightness
of the display will be reduced.
You can adjust the brightness of the display. To adjust the
brightness, see ªADJUSTING THE BRIGHTNESS OF THE
DISPLAYº below.
GAUGES, METERS AND SERVICE REMINDER INDICATORS
77
The digital clock indicates the time when the key is in the
ªACCº or ªONº position.
To reset the time, push and hold the ªMODEº button for 2
seconds. ªILLº will appear on the display. Then push the
ªMODEº button once. The time will blink.
To reset the hour Ð Push the ª
º button.
To reset the minutes Ð Push the ª
º button.
To adjust the time to the nearest hour, push the ªRESETº
button. For example, if the ªRESETº button is depressed when
the time is between 1:01 Ð 1:29, the time will change to 1:00.
If the time is between 1:30 Ð 1:59, the time will change to 2:00.
If the electric power source has been disconnected, the time
display will automatically be set to 1:00.
Outside temperature and cruise information
The following information is shown with the ignition
switch turned on. Each time you push the ªMODEº button,
the display toggles through this information.
Outside temperature
Average fuel consumption
Instantaneous fuel consumption
Driving range
Average vehicle speed
Barometer
Altimeter
Elapsed time
The displayed values indicate general driving conditions.
Accuracy varies with driving habits and road conditions.
