Page 310 of 668

AUDIO
289
Use high±quality cassettes:
Low±quality cassette tapes can cause many problems,
including poor sound, inconsistent playing speed, and
constant auto±reversing. They can also get stuck or tangled
in the cassette player.
Do not use a cassette if it has been damaged or tangled or
if its label is peeling off.
Do not leave a cassette in the player if you are not listening
to it, especially if it is hot outside.
Store cassettes in their cases and out of direct sunlight.
Avoid using cassettes with a total playing time longer than
100 minutes (50 minutes per side). The tape used in these
cassettes is thin and could get stuck or tangled in the
cassette player. Caring for your CD player and CDs
Your CD player is intended for use with 12 cm (4.7 in.) CDs
only.
Extremely high temperature can keep your CD player from
working. On hot days, use air conditioning to cool the
vehicle interior before you listen to a CD.
Bumpy roads or other vibrations may make your CD player
skip.
If moisture gets into your CD player, you may not hear any
sound even though your CD player appears to be working.
Eject all CDs from the player and wait until the player dries.
CAUTION
CD players use an invisible laser beam which could
cause hazardous radiation exposure if directed outside
the unit. Be sure to operate the player correctly.
Page 311 of 668
AUDIO
290
Use only CDs marked as shown above. The following
products may not be playable on your CD player.
Copy±protected CD
CD±R (CD±Recordable)
CD±RW (CD±Re±writable)
CD±ROM
SACD
dts±CDSpecial shaped CDs
Transparent/translucent CDs
Page 313 of 668
AUDIO
292
NOTICE
Do not use special shaped, transparent/translucent, lowquality or labeled CDs such as those shown in theillustrations. The use of such CDs may damage theplayer or changer, or it may be impossible to eject theCD.
Page 314 of 668
AUDIO
293
Correct Wrong
Handle CDs carefully, especially when you set them into the
player. Hold them on the edge and do not bend them. A void
getting fingerprints on them, particularly on the shiny side.
Dirt, scratches, warping, pin holes, or other CD damage
could cause the player to skip or to repeat a section of a
track. (To see a pin hole, hold the CD up to the light.)
To clean a CDs: Wipe it with a soft, lint±free cloth that has been
dampened with water. Wipe in a straight line from the center
to the edge of the CD (not in a circle). Do not use a
conventional record cleaner or anti±static device.
Page 327 of 668
AUDIO
306
Replacing remote control battery
For replacement, use a CR2025 lithium battery or equivalent.CAUTION
Special care should be taken that small children do not
swallow the removed battery or components.
NOTICE
When replacing the battery, be careful not to lose thecomponents.
Replace only with the same or equivalent type ofbattery recommended by a Lexus dealer.
Dispose of used batteries according to the localregulations.
Page 352 of 668
AUDIO
331
Replacing remote control battery
For replacement, use a CR2025 lithium battery or equivalent.CAUTION
Special care should be taken that small children do not
swallow the removed battery or components.
NOTICE
When replacing the battery, be careful not to lose thecomponents.
Replace only with the same or equivalent type ofbattery recommended by a Lexus dealer.
Dispose of used batteries according to localregulations.
Page 387 of 668
AUDIO
366(s) Selecting the chapter/track
To select the chapter/track, push the ªº or ªº
(TUNE/TRACK) button on the remote control until the
number of the chapter/track you want to select appears on
the screen. (t) Using the control screen1For DVD video2For DVD audio
When
playing a disc, push the ªDVDº button on the remote
control. The control screen will appear on the screen.
Details of the specific switches, controls and features are
described below.
ªPICTUREº switch: Push the ªPICTUREº switch to turn off the
control screen and return to the picture previously displayed.
ªRPTº switch (DVD audio only): Push the ªRPTº switch while
the track is playing. When the track ends, it will automatically
replay. To turn off the repeat feature, push this switch again.
ªRANDº sw itch (DVD audio only): Push the ªRANDº switch.
The player will play the tracks on the disc in random order. To
turn off the random feature, push this switch again.
Page 393 of 668

AUDIO
372When
playing a disc, push the ªDVDº button on the remote
control. The control screen will appear on the screen.
CD text only Ð The CD title and track title will appear on the
screen when pushing the ªDVDº button.
Details of the specific switches, controls and features are
described below.
ªPICTUREº switch (video CD only): Push the ªPICTUREº
switch to turn off the control screen and return to the picture
previously displayed.
ªRPTº switch (audio CD and CD text): Push the ªRPTº
switch while the track is playing. When the track ends, it will
automatically replay. To turn off the repeat feature, push this
switch again.
ªRANDº switch (audio CD and CD text): Push the ªRANDº
switch. The player will play the tracks on the CD in random
order. To turn off the random feature, push this switch again.
ªSCANº switch (audio CD and CD text): Push the ªSCANº
switch. The player will scan all the tracks on the CD. To stop
scanning, push this switch again. When the player has
scanned all the tracks on the CD, it will stop scanning.
ª
º and ªº switches: Push the ªº or ªº switch
to fast forward or reverse the disc. When you push the switch
again, the DVD player will resume playing. (h) Error messages
If the player malfunctions, your audio system will display one
of the three following error messages.
If ªDISC CHECKº appears on the screen:
It indicates that the
disc is dirty, damaged or it was inserted upside down. Clean
the disc or insert it correctly.
If ªREGION CODE ERRORº appears on the screen: It
indicates that the DVD region code is not set properly.
If ªDVD ERRORº appears on the screen: There is a problem
inside the player. Eject the disc. Set the disc again.
If the malfunction still exists, take your vehicle to your Lexus
dealer.