2005 INFINITI FX35 engine

TROUBLE DIAGNOSIS AT-79
D E
F
G H
I
J
K L
M A
B
AT
Revision: 2005 July 2005 FX
38
Slips/Will
Not
Engage While accelerating in
2nd, engine races or
slippage occurs. ON vehicle
1. A/T fluid level and state
AT- 5 2
2. Line pressure testAT- 5 4
3. Accelerator pedal position sensorAT-133
4. CAN communication lineAT-106
5. ATF pressure switch 5 and direct clutch solenoid valve AT-179,
AT-158
6. Control valve with TCM AT-243
OFF vehicle 7. Torque converter
AT-290
8. Oil pump assemblyAT-308
9. 3rd one-way clutch AT- 3 11
10. Gear systemAT-278
11. Direct clutchAT-326
12. Forward brake (Parts behind drum support is impossible
to perform inspection by disassembly. Refer to AT-18,
"Cross-Sectional View (2WD Models)" or AT-19, "Cross-
Sectional View (AWD Models)" ) AT-290
39
While accelerating in
3rd, engine races or
slippage occurs. ON vehicle
1. A/T fluid level and state
AT- 5 2
2. Line pressure testAT- 5 4
3. Accelerator pedal position sensorAT-133
4. CAN communication lineAT-106
5. ATF pressure switch 6, high and low reverse clutch sole-
noid valve AT-181,
AT-162

6. Control valve with TCM AT-243
OFF vehicle 7. Torque converter
AT-290
8. Oil pump assemblyAT-308
9. 3rd one-way clutch AT- 3 11
10. Gear systemAT-278
11. High and low reverse clutchAT-323
12. Forward one-way clutch (Parts behind drum support is
impossible to perform inspection by disassembly. Refer to
AT- 1 8 , "
Cross-Sectional View (2WD Models)" or AT- 1 9 ,
"Cross-Sectional View (AWD Models)" ) AT-290
13. Forward brake (Parts behind drum support is impossible
to perform inspection by disassembly. Refer to AT-18,
"Cross-Sectional View (2WD Models)" or AT-19, "Cross-
Sectional View (AWD Models)" ) AT-290
No. Items Symptom Condition Diagnostic Item
Reference
page

AT-80
TROUBLE DIAGNOSIS
Revision: 2005 July 2005 FX
40
Slips/Will
Not
Engage While accelerating in
4th, engine races or
slippage occurs. ON vehicle
1. A/T fluid level and state
AT- 5 2
2. Line pressure testAT- 5 4
3. Accelerator pedal position sensorAT- 1 3 3
4. CAN communication lineAT- 1 0 6
5. ATF pressure switch 3 and input clutch solenoid valve AT- 1 7 7,
AT- 1 5 0
6. Control valve with TCM AT- 2 4 3
OFF vehicle 7. Torque converter
AT- 2 9 0
8. Oil pump assemblyAT- 3 0 8
9. Input clutchAT- 3 1 3
10. Gear systemAT- 2 7 8
11. High and low reverse clutchAT- 3 2 3
12. Direct clutchAT- 3 2 6
41 While accelerating in
5th, engine races or
slippage occurs. ON vehicle
1. A/T fluid level and state
AT- 5 2
2. Line pressure testAT- 5 4
3. Accelerator pedal position sensorAT- 1 3 3
4. CAN communication lineAT- 1 0 6
5. ATF pressure switch 1 and front brake solenoid valve AT- 1 7 5,
AT- 1 5 4
6. Control valve with TCM AT- 2 4 3
OFF vehicle 7. Torque converter
AT- 2 9 0
8. Oil pump assembly AT- 3 0 8
9. Front brake (brake band)AT- 2 9 0
10. Input clutchAT- 3 1 3
11. Gear systemAT- 2 7 8
12. High and low reverse clutchAT- 3 2 3
42 Slips at lock-up. ON vehicle 1. A/T fluid level and state
AT- 5 2
2. Line pressure testAT- 5 4
3. Engine speed signalAT- 1 2 3
4. Turbine revolution sensorAT- 1 4 1
5. Torque converter clutch solenoid valveAT- 1 2 5
6. CAN communication lineAT- 1 0 6
7. Control valve with TCMAT- 2 4 3
OFF vehicle 8. Torque converter
AT- 2 9 09. Oil pump assemblyAT- 3 0 8
No. Items Symptom Condition Diagnostic Item Reference
page

AT-84
TROUBLE DIAGNOSIS
Revision: 2005 July 2005 FX
53
Others Shift point is low in “D”
position. ON vehicle 1. Vehicle speed sensor A/T and vehicle speed sensor MTR
AT- 11 8
,
AT- 1 4 3
2. Accelerator pedal position sensor AT- 1 3 3
3. CAN communication lineAT- 1 0 6
4. Control valve with TCMAT- 2 4 3
54 Judder occurs during
lock-up. ON vehicle 1. A/T fluid level and state
AT- 5 2
2. Engine speed signalAT- 1 2 3
3. Turbine revolution sensorAT- 1 4 1
4. Vehicle speed sensor A/T and vehicle speed sensor MTR AT- 11 8,
AT- 1 4 3
5. Accelerator pedal position sensor AT- 1 3 3
6. CAN communication lineAT- 1 0 6
7. Torque converter clutch solenoid valveAT- 1 2 5
8. Control valve with TCMAT- 2 4 3
OFF vehicle 9. Torque converter AT- 2 9 0
55 Strange noise in “R”
position. ON vehicle
1. A/T fluid level and state
AT- 5 2
2. Engine speed signalAT- 1 2 3
3. CAN communication lineAT- 1 0 6
4. Control valve with TCMAT- 2 4 3
OFF vehicle 5. Torque converter
AT- 2 9 0
6. Oil pump assemblyAT- 3 0 8
7. Gear systemAT- 2 7 8
8. High and low reverse clutchAT- 3 2 3
9. Reverse brakeAT- 2 9 0
56 Strange noise in “N”
position. ON vehicle
1. A/T fluid level and state
AT- 5 2
2. Engine speed signalAT- 1 2 3
3. CAN communication lineAT- 1 0 6
4. Control valve with TCMAT- 2 4 3
OFF vehicle 5. Torque converter
AT- 2 9 06. Oil pump assemblyAT- 3 0 8
7. Gear systemAT- 2 7 8
No. Items Symptom Condition Diagnostic Item Reference
page

TROUBLE DIAGNOSIS AT-85
D E
F
G H
I
J
K L
M A
B
AT
Revision: 2005 July 2005 FX57
Others Strange noise in “D”
position. ON vehicle
1. A/T fluid level and state
AT- 5 2
2. Engine speed signalAT-123
3. CAN communication lineAT-106
4. Control valve with TCMAT-243
OFF vehicle 5. Torque converter
AT-290
6. Oil pump assemblyAT-308
7. Gear systemAT-278
8. Forward brake (Parts behind drum support is impossible
to perform inspection by disassembly. Refer to AT-18,
"Cross-Sectional View (2WD Models)" or AT-19, "Cross-
Sectional View (AWD Models)" ) AT-290
58 Vehicle does not
decelerate by engine
brake.
Refer to AT-231,
"Vehicle Does Not
Decelerate by Engine
Brake" . ON vehicle
1. PNP switch
AT- 11 4
2. A/T fluid level and state AT- 5 2
3. Control linkage adjustmentAT-235
4. Manual mode switchAT-170
5. ATF pressure switch 5AT-179
6. CAN communication lineAT-106
7. Control valve with TCMAT-243
OFF vehicle 8. Input clutch
AT-3139. High and low reverse clutchAT-323
10. Direct clutchAT-326
59 Engine brake does
not work M5 → M4. ON vehicle 1. PNP switch
AT- 11 4
2. A/T fluid level and state AT- 5 2
3. Control linkage adjustmentAT-235
4. Manual mode switchAT-170
5. ATF pressure switch 1AT-175
6. CAN communication lineAT-106
7. Control valve with TCMAT-243
OFF vehicle 8. Front brake (brake band) AT-290
60 Engine brake does
not work M4 → M3. ON vehicle 1. PNP switch
AT- 11 4
2. A/T fluid level and state AT- 5 2
3. Control linkage adjustmentAT-235
4. Manual mode switchAT-170
5. ATF pressure switch 1 and ATF pressure switch 3 AT-175,
AT-177
6. CAN communication line AT-106
7. Control valve with TCMAT-243
OFF vehicle 8. Front brake (brake band)
AT-2909. Input clutchAT-313
No. Items Symptom Condition Diagnostic Item Reference
page

AT-86
TROUBLE DIAGNOSIS
Revision: 2005 July 2005 FX
61
Others Engine brake does
not work M3 → M2. ON vehicle 1. PNP switch
AT- 11 4
2. A/T fluid level and state AT- 5 2
3. Control linkage adjustmentAT- 2 3 5
4. Manual mode switchAT- 1 7 0
5. ATF pressure switch 6AT- 1 8 1
6. CAN communication lineAT- 1 0 6
7. Control valve with TCMAT- 2 4 3
OFF vehicle 8. Front brake (brake band)
AT- 2 9 09. Input clutchAT- 3 1 3
10. High and low reverse clutchAT- 3 2 3
62 Engine brake does
not work M2 → M1. ON vehicle 1. PNP switch
AT- 11 4
2. A/T fluid level and state AT- 5 2
3. Control linkage adjustmentAT- 2 3 5
4. Manual mode switchAT- 1 7 0
5. ATF pressure switch 5AT- 1 7 9
6. CAN communication lineAT- 1 0 6
7. Control valve with TCMAT- 2 4 3
OFF vehicle 8. Input clutch
AT- 3 1 39. High and low reverse clutchAT- 3 2 3
10. Direct clutchAT- 3 2 6
63 Maximum speed low. ON vehicle
1. A/T fluid level and state
AT- 5 2
2. Line pressure testAT- 5 4
3. Accelerator pedal position sensorAT- 1 3 3
4. CAN communication lineAT- 1 0 6
5. Direct clutch solenoid valveAT- 1 5 8
6. Control valve with TCMAT- 2 4 3
OFF vehicle 7. Torque converter
AT- 2 9 0
8. Oil pump assemblyAT- 3 0 8
9. Input clutchAT- 3 1 3
10. Gear systemAT- 2 7 8
11. High and low reverse clutchAT- 3 2 3
12. Direct clutchAT- 3 2 6
13. Forward one-way clutch (Parts behind drum support is
impossible to perform inspection by disassembly. Refer to
AT-18, "
Cross-Sectional View (2WD Models)" or AT-19,
"Cross-Sectional View (AWD Models)" ) AT- 2 9 0
14. Forward brake (Parts behind drum support is impossible
to perform inspection by disassembly. Refer to AT-18,
"Cross-Sectional View (2WD Models)" or AT- 1 9 , "Cross-
Sectional View (AWD Models)" ) AT- 2 9 0
No. Items Symptom Condition Diagnostic Item
Reference
page

TROUBLE DIAGNOSIS AT-87
D E
F
G H
I
J
K L
M A
B
AT
Revision: 2005 July 2005 FX
64
Others Extremely large
creep. ON vehicle 1. Engine idle speed EC-83
(for
VQ35DE)
or EC-774

(for
VK45DE)
2. CAN communication line AT-106
3. ATF pressure switch 5AT-179
OFF vehicle 4. Torque converter AT-290
65 With selector lever in
“P” position, vehicle
does not enter parking
condition or, with
selector lever in
another position, park-
ing condition is not
cancelled.
Refer to AT-195, "
In
“P” Position, Vehicle
Moves When Pushed"
. ON vehicle
1. PNP switch
AT- 11 4
2. Control linkage adjustmentAT-235
OFF vehicle 3. Parking pawl components AT-
255(2WD
models) or AT-290

(AWD
models)
66 Vehicle runs with
transmission in “P”
position. ON vehicle
1. PNP switch
AT- 11 4
2. A/T fluid level and state AT- 5 2
3. Control linkage adjustmentAT-235
4. Control valve with TCMAT-243
OFF vehicle 5. Parking pawl components AT-
255(2WD
models) or
AT-290

(AWD
models)
6. Gear system AT-278
67 Vehicle runs with
transmission in “N”
position.
Refer to AT-196, "In
“N” Position, Vehicle
Moves" . ON vehicle
1. PNP switch
AT- 11 4
2. A/T fluid level and state AT- 5 2
3. Control linkage adjustmentAT-235
4. Control valve with TCMAT-243
OFF vehicle 5. Input clutch
AT-313
6. Gear systemAT-278
7. Direct clutchAT-326
8. Reverse brakeAT-290
9. Forward one-way clutch (Parts behind drum support is
impossible to perform inspection by disassembly. Refer to
AT- 1 8 , "
Cross-Sectional View (2WD Models)" or AT- 1 9 ,
"Cross-Sectional View (AWD Models)" ) AT-290
10. Low coast brake (Parts behind drum support is impossi-
ble to perform inspection by disassembly. Refer to AT-18,
"Cross-Sectional View (2WD Models)" or AT-19, "Cross-
Sectional View (AWD Models)" ) AT-290
No. Items Symptom Condition Diagnostic Item
Reference
page

AT-88
TROUBLE DIAGNOSIS
Revision: 2005 July 2005 FX
68
Others Engine does not start
in “N” or “P” position.
Refer to AT-194, "Engine Cannot Be
Started in “P” or “N”
Position" . ON vehicle
1. Ignition switch and starter
PG-3
,
SC-
10
2. Control linkage adjustment AT- 2 3 5
3. PNP switch AT- 11 4
69 Engine starts in posi-
tions other than “N” or
“P”. ON vehicle 1. Ignition switch and starter
PG-3
,
SC-
10
2. Control linkage adjustment AT- 2 3 5
3. PNP switch AT- 11 4
70 Engine stall. ON vehicle 1. A/T fluid level and state
AT- 5 2
2. Engine speed signalAT- 1 2 3
3. Turbine revolution sensorAT- 1 4 1
4. Torque converter clutch solenoid valveAT- 1 2 5
5. CAN communication lineAT- 1 0 6
6. Control valve with TCMAT- 2 4 3
OFF vehicle 7. Torque converter AT- 2 9 0
71 Engine stalls when
selector lever shifted
“N” → “D”, “R”. ON vehicle 1. A/T fluid level and state
AT- 5 2
2. Engine speed signalAT- 1 2 3
3. Turbine revolution sensorAT- 1 4 1
4. Torque converter clutch solenoid valveAT- 1 2 5
5. CAN communication lineAT- 1 0 6
6. Control valve with TCMAT- 2 4 3
OFF vehicle 7. Torque converter AT- 2 9 0
72 Engine speed does
not return to idle.
Refer to AT-221,
"Engine Speed Does
Not Return to Idle" . ON vehicle 1. A/T fluid level and state
AT- 5 2
2. ATF pressure switch 5 and direct clutch solenoid valve AT- 1 7 9,
AT- 1 5 8

3. ATF pressure switch 1 and front brake solenoid valve AT- 1 7 5
,
AT- 1 5 4
4. Accelerator pedal position sensor AT- 1 3 3
5. Vehicle speed sensor A/T and vehicle speed sensor MTR AT- 11 8,
AT- 1 4 3
6. CAN communication line AT- 1 0 6
7. Control valve with TCMAT- 2 4 3
OFF vehicle 8. Front brake (brake band)
AT- 2 9 09. Direct clutchAT- 3 2 6
No. Items Symptom Condition Diagnostic Item Reference
page

AT-90
TROUBLE DIAGNOSIS
Revision: 2005 July 2005 FX
CONSULT-II Function (A/T)ACS002M9
CONSUT-II can display each diagnostic item using the diagnostic test models shown following.
FUNCTION
CONSULT-II REFERENCE VALUE
NOTICE:
1. The CONSULT-II electrically displays shift timing and lock-up timing (that is, operation timing of each sole-
noid).
Check for time difference between actual shift timing and the CONSULT-II display. If the difference is
noticeable, mechanical parts (except solenoids, sensors, etc.) may be malfunctioning. Check mechanical
parts using applicable diagnostic procedures.
2. Shift schedule (which implies gear position) displayed on CONSULT-II and that indicated in Service Man- ual may differ slightly. This occurs because of the following reasons:
–Actual shift schedule has more or less tolerance or allowance,
–Shift schedule indicated in Service Manual refers to the point where shifts start, and
–Gear position displayed on CONSULT-II indicates the point where shifts are completed.
3. Display of solenoid valves on CONSULT-II changes at the start of shifting, while gear position is displayed upon completion of shifting (which is computed by TCM).
Diagnostic test mode Function Reference page
Self-diagnostic results Self-diagnostic results can be read and erased quickly. AT- 9 3
Data monitor Input/Output data in the ECU can be read.AT- 9 6
CAN diagnostic support
monitor The results of transmit/receive diagnosis of CAN communication can be read.
AT- 1 0 0
Function test Performed by CONSULT-II instead of a technician to determine whether each system
is “OK” or “NG”. —
DTC work support Select the operating condition to confirm Diagnosis Trouble Codes. AT- 1 0 0
ECU part number ECU part number can be read. —
Item name Condition Display value
(Approx.)
VHCL/S SE·A/T During driving Approximately
matches the speed-
ometer reading.
VHCL/S SE·MTR
ACCELE POSI Released accelerator pedal. 0.0/8
Fully depressed accelerator pedal. 8/8
CLSD THL POS Released accelerator pedal. ON
Fully depressed accelerator pedal. OFF
W/O THL POS Fully depressed accelerator pedal. ON
Released accelerator pedal. OFF
BRAKE SW Depressed brake pedal. ON
Released brake pedal. OFF
ENGINE SPEED Engine running Closely matches the
tachometer reading.
TURBINE REV During driving (lock-up ON) Approximately
matches the engine
speed.
ATF TEMP SE 1 0 °C (32 ° F) - 20 °C (68 °F) - 80 °C (176 °F) 3.3 - 2.7 - 0.9 V
ATF TEMP SE 2 3.3 - 2.5 - 0.7 V
TCC SOLENOID When performing slip lock-up 0.2 - 0.4 A
When performing lock-up 0.4 - 0.6 A
LINE PRES SOL During driving 0.2 - 0.6 A