2005 Hyundai Matrix coolant level

6 DO-IT-YOURSELF MAINTENANCE
32
To check the power steering fluid level, be sure the ignition is "OFF",then check to make certain that the power steering fluid level is between the "MAX" and "MIN" level markingson the fluid reservoir. NOTE: Grinding noise from the power steering pump may be heard im- mediately after the engine is startedin extremely cold conditions (be- low - 20°C). If the noise stops dur- ing warm up, there is no abnormalfunction in the system. It is due to a power steering fluid characteris- tic in extremely cold conditions. Recommended Fluid Use PSF-3 type fluid NOTE: Do not start the engine when the power steering oil reservoir is empty.
!
CHECKING ELECTRIC COOLING FANS
G220A01A-AAT
WARNING:
The cooling fan is controlled by engine coolant temperature and may sometimes operate even whenthe engine is not running. Use extreme caution when working near the blades of the cooling fan,so that you are not injured by a rotating fan blade. As the engine coolant temperature decreases thefan will automatically shut off. This is a normal condition.POWER STEERING FLUID LEVEL
G220B01A-AAT
Checking Engine Cooling Fan
The engine cooling fan should come on automatically if the engine coolant temperature is high. G220C01A-AAT
Checking Condenser Cooling Fan
The condenser cooling fan should come on automatically whenever the air conditioning is in operation. G230A03A-GAT
HFC5004
G230A02FC
Gasoline engine
Diesel engine
The power steering fluid level should be checked regularly.

6
DO-IT-YOURSELF MAINTENANCE
35
!WARNING:
o Do not smoke or have any other open flame near the vehicle while bleeding the fuel system.
o Be sure to carefully wipe away any water drained out in thismanner, because the fuel mixed in the water might be ignited and result in a fire.
HEADLIGHT AIMING ADJUSTMENT
G290A01FC-GAT Before performing aiming adjustment, make sure of the following.
1. Keep all tires inflated to the correct
pressure.
2. Place the vehicle on level ground and press the front bumper and rear bumper down several times.Place the vehicle at a distance of 3,000 mm (118 in.) from the test wall.
3. See that the vehicle is unloaded
(except for full levels of coolant,engine oil and fuel, and spare tire, jack, and tools).
4. Clean the head lights lens and turn on the headlight (low beam). G290A01FC
5. Open the hood.
6. Draw the vertical line (through the center of each headlight beam pat- tern) and the horizontal line (throughthe center of each headlight beam pattern) on the aiming screen. And then, draw a horizontal paral- lel line at 30 mm (1.18 in.) under the horizontal line.
7. Adjust each cut-off line of the low beam to the parallel line with aphillips screwdriver - VERTICALAIMING.
8. Adjust each cut-off line of the low beam to each vertical line with a phillips screwdriver - HORIZON- TAL AIMING.
Horizontal Aiming
Vertical Aiming

10
INDEX
3
D Defrosting/Defogging ................................................. 1-87
Digital Clock .............................................................. 1-64
Door Central door lock ...................................................... 1-9
Child-protector rear door lock .................................. 1-9
Door locks ................................................................ 1-7
Locking and unlocking front doors with a key ......... 1-7
Drink Holder .............................................................. 1-66
Drive Belts ................................................................ 6-28
Driving
Economical driving ................................................. 2-16
Smooth cornering ................................................... 2-18
Winter driving ......................................................... 2-18
E EGR System ............................................................... 7-4
Emissions Control Systems ........................................ 7-2Engine Before starting the engine ....................................... 2-3
Compartment ................................................. 6-2 ~ 6-4 Coolant ................................................................... 6-12
Coolant temper ature gauge ................................... 1-53
If the engine overheats ............................................ 3-4
Number .................................................................... 8-2
Oil ............................................................................. 6-6
Starting ..................................................................... 2-5
Engine Exhaust Can Be Dangerous ........................... 2-2F Fog Light
Front fog light switch ............................................. 1-62
Rear fog light switch .............................................. 1-63
Fold-up Tray .............................................................. 1-74
Front Seats Adjustable front seats ............................................ 1-14
Lumbar support control .................. ........................ 1-16
Seat cushion height adjustment............................ 1-16
Fuel Capacity ................................................................... 9-2
Gauge .................................................................... 1-53
Recommendations ................................................... 1-2
Fuel Filler Lid Remote release ...................................................... 1-76
Fuse Panel Descri ption ............................................. 6-39
Fuses ........................................................................ 6-29
GGeneral Checks .......................................................... 6-5
Glove box .................................................................. 1-71
HHazard Warning System ........................................... 1-61
Headlight Aiming Adjustment .................................. 6-35
Headlight Bulb........................................................... 6-37
Headlight Leveling Device Syst em ...........................1-63