1FEATURES OF YOUR HYUNDAI12
B090C01Y-AATSeat Cushion Height Adjustment
(Driver's Seat Only)Move the front portion of the control knob up or
down to raise or lower the front part of the seat
cushion. Move the rear portion of the control
knob up or down to raise or lower the rear part
of the seat cushion.
HXG106
!
WARNING:
o For maximum effectiveness in case of an
accident the headrest should be ad-
justed so the top of the headrest is at the
same height as the top of the occupant's
ears. For this reason, the use of a cush-
ion that holds the body away from the
seatback should not be recommended.
o Do not operate vehicle with the head-
rests removed as injury to the occupants
may occur in the event of an accident.
Headrests may provide protection
against neck injuries when properly ad-
justed.
B080G01LB080E01L-AAT
Lumbar Support ControlTo adjust the lumbar support, turn the handle on
the outboard or left side of the seat. To increase
the amount of lumbar support, pull the lever
forward. To decrease it, push the lever toward
the rear.
1. Minimum support
2. Maximum support
HXG108
2 1
xgflhma-1.p656/16/04, 3:02 PM 12
ProCarManuals.com
1
FEATURES OF YOUR HYUNDAI
49
B340F01L-GATAuto Light (If Installed)To operate the automatic light feature, turn the
barrel on the end of the multi-function switch. If
you set the multi-function switch to "AUTO", the
tail lights and headlights will be turned automati-
cally on or off according to external illumination.
3A9CA44B340D01A-AAT
High-beam Switch
B340E01A-AATHeadlight FlasherTo flash the headlights, pull the switch lever
toward you, then release it. The headlights can
be flashed even though the headlight switch is
in the "OFF" position.
HHP268
To turn on the headlight high beams, push the
lever forward (away from you). The High Beam
Indicator Light will come on at the same time. For
low beams, pull the lever back toward you.
HHP269
xgflhma-1.p656/16/04, 3:03 PM 49
ProCarManuals.com
