2005 FORD F150 battery location

The fuses are coded as follows.
Fuse/Relay
LocationFuse Amp
RatingPassenger Compartment Fuse Panel
Description
1 10A* Run/Accessory - Wipers, Instrument
cluster
2 20A* Stop/Turn lamps, Speed control deactivate
switch
3 5A* Power mirrors, Memory logic power,
Memory seats and pedals
4 10A* DVD battery power, Power fold mirror
5 7.5A* Keep alive memory for Powertrain Control
Module (PCM) and climate control module
6 15A* Parklamps, BSM, Instrument panel
illumination
7 5A* Radio (start signal)
8 10A* Heated mirrors, Switch indicator
9—Not used
REVIEW COPY
2005 F150(f12), Owners Guide (post-2002-fmt)(own2002),
Market:USA_English(fus)
Roadside Emergencies
227

Fuse/Relay
LocationFuse Amp
RatingPassenger Compartment Fuse Panel
Description
10 20A* Trailer tow back-up lamps relay (PCB1),
Trailer tow parklamp relay (R201)
11 10A* A/C clutch, 4x4 solenoid
12—Not used
13 10A* Climate control module power, Flasher
relay
14 10A*With a yellow sticker on the back of
the fuse panel:Back-up lamp and
Daytime Running Lamps (DRL) relay coil,
A/C pressure switch, ABS, Heated PCV
(5.4L), Redundant speed control switch
All others:Back-up lamp and Daytime
Running Lamps (DRL) relay coil, A/C
pressure switch, Redundant speed control
switch, Heated PCV (5.4L), Trailer tow
back-up lamps relay coil, ABS, Reverse
park aid, EC mirror
15 5A* Overdrive cancel, Cluster, Brake-Shift
Interlock (BSI)
16 10A* Brake-shift interlock solenoid
17 15A* Fog lamp relay (R202)
18 10A* Run/Start feed - Overhead power point,
Electrochromatic mirror, Heated seats,
BSM, Compass, RSS (Reverse Sensing
System)
19 10A* Restraints (Air bag module)
20 10A* Battery feed for overhead power point
21 15A* Cluster keep alive power
22 10A* Delayed accessory power for audio, power
door lock switch and moonroof switch
illumination
23 10A* RH low beam headlamp
24 15A* Battery saver power for demand lamps
REVIEW COPY
2005 F150(f12), Owners Guide (post-2002-fmt)(own2002),
Market:USA_English(fus)
Roadside Emergencies
228

Fuse/Relay
LocationFuse Amp
RatingPassenger Compartment Fuse Panel
Description
105 30A** Electric trailer brakes
106 30A** Trailer tow battery charge
107 30A** Power door locks (BSM)
108 30A** Passenger power seat
109 30A** Driver power seat, Adjustable pedals
110—Not used
111 30A** 4x4 relays
112 40A** ABS pump power
113 30A** Wipers and washer pump
114 40A** Heated backlite, Heated mirror power
115—Not used
116 30A** Blower motor
117—Not used
118 30A** Heated seats
401 30A Circuit
breakerPower windows, Moonroof, Power sliding
backlite
R01 Full ISO
relayStarter solenoid
R02 Full ISO
relayAccessory delay
R03 Full ISO
relayHi-beam headlamps
R04 Full ISO
relayHeated backlite
R05 Full ISO
relayTrailer tow battery charge
R06 Full ISO
relayBlower motor
R201 Half ISO
relayTrailer tow park lamps
R202 Half ISO
relayFog lamps
REVIEW COPY
2005 F150(f12), Owners Guide (post-2002-fmt)(own2002),
Market:USA_English(fus)
Roadside Emergencies
230

Fuse/Relay
locationFuse amp
ratingDescription
R02 Full ISO
Relay4x4 CW
R03
12ISO
RelayDaytime Running Lamps (DRL) high beam
disable
R201 Relay DRL
R202 Relay A/C clutch
D01 Diode A/C clutch
JUMP STARTING YOUR VEHICLE
The gases around the battery can explode if exposed to flames,
sparks, or lit cigarettes. An explosion could result in injury or
vehicle damage.
Batteries contain sulfuric acid which can burn skin, eyes and
clothing, if contacted.
Do not attempt to push-start your vehicle. Automatic
transmissions do not have push-start capability; doing so may
damage the catalytic converter.
Preparing your vehicle
When the battery is disconnected or a new battery is installed, the
transmission must relearn its shift strategy. As a result, the transmission
may have firm and/or soft shifts. This operation is considered normal and
will not affect function or durability of the transmission. Over time, the
adaptive learning process will fully update transmission operation.
1.Use only a 12–volt supply to start your vehicle.
2. Do not disconnect the battery of the disabled vehicle as this could
damage the vehicle’s electrical system.
3. Park the booster vehicle close to the hood of the disabled vehicle
making sure the two vehiclesdo nottouch. Set the parking brake on
both vehicles and stay clear of the engine cooling fan and other moving
parts.
4. Check all battery terminals and remove any excessive corrosion before
you attach the battery cables. Ensure that vent caps are tight and level.
REVIEW COPY
2005 F150(f12), Owners Guide (post-2002-fmt)(own2002),
Market:USA_English(fus)
Roadside Emergencies
232

SERVICE RECOMMENDATIONS
To help you service your vehicle:
•We highlight do-it-yourself items in the engine compartment for easy
location.
•We provide a scheduled maintenance guide which makes tracking
routine service easy.
If your vehicle requires professional service, your dealership can provide
the necessary parts and service. Check yourWarranty Guide/Owner
Information Guideto find out which parts and services are covered.
Use only recommended fuels, lubricants, fluids and service parts
conforming to specifications. Motorcraft parts are designed and built to
provide the best performance in your vehicle.
PRECAUTIONS WHEN SERVICING YOUR VEHICLE
•Do not work on a hot engine.
•Make sure that nothing gets caught in moving parts.
•Do not work on a vehicle with the engine running in an enclosed
space, unless you are sure you have enough ventilation.
•Keep all open flames and other burning (cigarettes) material away
from the battery and all fuel related parts.
Working with the engine off
•Automatic transmission:
1. Set the parking brake and shift to P (Park).
2. Turn off the engine and remove the key.
3. Block the wheels.
•Manual transmission:
1. Set the parking brake, depress the clutch and place the gearshift in 1
(First).
2. Turn off the engine and remove the key.
3. Block the wheels.
Working with the engine on
•Automatic transmission:
1. Set the parking brake and shift to P (Park).
2. Block the wheels.
REVIEW COPY
2005 F150(f12), Owners Guide (post-2002-fmt)(own2002),
Market:USA_English(fus)
Maintenance and Specifications
Maintenance and Specifications
254