2005 FORD EXPLORER clock setting

(if equipped)
For information on other types of radios,
please refer to your Owner’s Guide.
Scan Function– In radio mode, press
to hear a sampling of all listenable
stations. In CD mode, press to hear abrief sampling of all selections on the
current CD.
CD/AUX – Press to select CD/AUX modes.
No CD will display if a CD is not present in
the audio system. If a disc is loaded, there
will be a number (16) inside the circle on
the display. When in radio mode, pressCD/AUX to play a loaded CD.
Loading CD– Press LOAD and then a
preset number to select a slot. Press andhold LOAD to activate autoload.
Volume/Power Control – Press the
control to turn the audio system on or
off. Turn the control to raise or lowervolume. The speedsensitive volume
feature automatically adjusts radio
volume in accordance with vehicle speed
to compensate for road and wind noise.
To engage, press and hold the volume
control for five seconds (with the radio
on), then simultaneously press SEL tochoose the compensation level.
AM/FM Select – In radio mode, press
AM/FM to select AM, FM1, FM2 frequency
bands. In CD mode, press AM/FM to stop
play and begin radio play. Press and holdAM/FM to activate autoset.
Satellite – Your Audiophile radio comes
equipped with satelliteready capability.
The kit to enable satellite reception is
available through your Ford dealer.
Detailed satellite instructions are included
with the dealerinstalled kit. Dealer
installed satellite kits are available only inthe continental United States.
Disc/Tune CAT– In radio mode, press to
move to the next frequency up or down
the band. In CD mode, press to select a
disc in the CD player. CAT is only availablewhen equipped with satellite radio.
Digital Signal Processing– Press DSP and
then SEL to choose the desired signalmode.
Seek Function– In radio mode, press to
move to the next listenable station up or
down the band. In CD mode, press to
select the next/previous track on the
current disc.
Setting the Clock– Press MENU until
SELECT HOUR or SELECT MINS is displayed.
Press SEL to set the time. Press MENUagain to disengage the clock mode.
Setting Memory Preset Stations– Select
AM, FM1, or FM2 frequency bands, then
select a station. Next, press and hold a
numbered control until the sound returns.
A
B
D
E
C
F
G
J
K
I
H
A
J
K
I
G
C
D
E
F
HB
CAUTION: DO NOT USE CDs WITH ADHESIVE LABEL*
* CDs with adhesive labels and irregularly shaped CDs may get stuck in the CD player. Homemade
CDs should be identified with permanent felt tip marker rather than adhesive labels.

Volume/Power Control– Press the
control to turn the audio system on or
off. Turn the control to raise or lowervolume. If the volume is set above a
certain level and the ignition is turned
off, the volume will come back on at a"nominal" listening level when the
ignition switch is turned back on.
AM/FM Select– In radio mode, press
to select AM, FM1, or FM2 band. In
tape or CD mode, press to stop play
and begin radio play.
Seek Function– In radio mode, press to
find the next listenable station up or
down the band. In tape mode, press to
move to the next/previous selection on
the tape. In CD mode, press to select
the next/previous track of the disc.
Scan Function– In radio mode, press
to hear a sampling of all listenable
stations. In tape or CD mode, press to hear a brief sampling of all
selections. Press the control again to stop the scan function.
Tune Adjust – In radio mode, press to
move to the next frequency up ordown the band.
Tape/CD Select– To begin tape play
while in radio or CD mode, press the
tape control. To begin CD play, press
the CD control. Press the CD controlagain to toggle between single CDand CD changer play (if equipped).
Autoset Memory Preset – Select AM,
FM1, or FM2 bands, then press AUTO to
activate autoset memory preset, which
allows you to set strong radio stationswithout losing your original manually
set preset stations. Press again to deactivate autoset.
Setting the Clock– Press the CLK
control to toggle between station
mode and clock mode. Press and hold
to set the clock. Press the SEEK to
decrease hours or SEEK to increase
hours. Press the TUNE to decrease
minutes or TUNE to increase minutes.
Select– Press to adjust sound output
and distribution after selecting BASS,
TREB, BAL, FADE, or other menu selections.
Setting Memory Preset Stations–
Select AM, FM1, or FM2 band, then
select a station. Next, press and
hold a numbered control until the
sound returns.
A
B
E
D
C
F
G
I
A
B
E
D
C
F
G
J
I
H
J
H
(if equipped)