2005 FORD EXCURSION lock

[x] Cancel search: lock

Page 177 of 280

FORD EXCURSION 2005 1.G Owners Manual Understanding the gearshift positions of the 4–speed automatic
transmission (if equipped-gasoline engines only)
This vehicle is equipped with an adaptive Transmission Shift Strategy.
Adaptive Shift

Page 179 of 280

FORD EXCURSION 2005 1.G Owners Manual •Selecting 2 (Second) at higher speeds will cause the transmission to
downshift to second gear at the appropriate vehicle speed.
1 (First)
•Provides maximum engine braking.
•Allows upshifts by m

Page 180 of 280

FORD EXCURSION 2005 1.G Owners Manual To put your vehicle in P (Park):
•Come to a complete stop
•Move the gearshift lever and securely latch it in P (Park)
Always set the parking brake fully and make sure the gearshift is
latched in P

Page 182 of 280

FORD EXCURSION 2005 1.G Owners Manual If your vehicle gets stuck in mud or snow
If your vehicle gets stuck in mud or snow, it may be rocked out by
shifting between forward and reverse gears, stopping between shifts in a
steady pattern. Pr

Page 184 of 280

FORD EXCURSION 2005 1.G Owners Manual FOUR-WHEEL DRIVE (4WD) OPERATION (IF EQUIPPED)
For important information regarding safe operation of this type
of vehicle, seePreparing to drive your vehiclein this chapter.
When four–wheel drive (4

Page 185 of 280

FORD EXCURSION 2005 1.G Owners Manual •auto-manual hub locks can be
manually overridden by rotating
the hub lock control from AUTO
to LOCK if desired.
•automatic operation of the
hub locks is recommended,and
will increase fuel economy

Page 190 of 280

FORD EXCURSION 2005 1.G Owners Manual Vehicles with a higher center of gravity such as utility and
four-wheel drive vehicles handle differently than vehicles with a
lower center of gravity. Utility and four-wheel drive vehicles arenot
des

Page 191 of 280

FORD EXCURSION 2005 1.G Owners Manual Power is supplied to all four wheels
through a transfer case. On 4WD
vehicles, the transfer case allows
you to select 4WD when necessary.
Information on transfer case
operation and shifting procedures