2005 FORD CROWN VICTORIA check engine light

[x] Cancel search: check engine light

Page 10 of 264

FORD CROWN VICTORIA 2005 2.G Owners Manual WARNING LIGHTS AND CHIMES
Standard instrument cluster
Optional instrument cluster
Warning lights and gauges can alert you to a vehicle condition that may
become serious enough to cause expensive repai

Page 11 of 264

FORD CROWN VICTORIA 2005 2.G Owners Manual Maintenance and Specificationschapter. If the light is blinking, engine
misfire is occurring which could damage your catalytic converter. Drive
in a moderate fashion (avoid heavy acceleration and dece

Page 12 of 264

FORD CROWN VICTORIA 2005 2.G Owners Manual Driving a vehicle with the brake system warning light on is
dangerous. A significant decrease in braking performance may
occur. It will take you longer to stop the vehicle. Have the vehicle
checked by

Page 13 of 264

FORD CROWN VICTORIA 2005 2.G Owners Manual Never remove the coolant reservoir cap while the engine is
running or hot.
Traction controlAdvanceTrac
active (if equipped):Illuminates
when the Traction controlsystem
is active. It will be lit for

Page 19 of 264

FORD CROWN VICTORIA 2005 2.G Owners Manual Engine oil pressure gauge (if
equipped):Indicates engine oil
pressure. The needle should stay in
the normal operating range
(between “L” and “H”). If the needle
falls below the normal range, s

Page 165 of 264

FORD CROWN VICTORIA 2005 2.G Owners Manual Trailer lamps
Trailer lamps are required on most towed vehicles. Make sure all running
lights, brake lights, turn signals and hazard lights are working. See your
dealer or trailer rental agency for pr

Page 169 of 264

FORD CROWN VICTORIA 2005 2.G Owners Manual 5. Turn the key to 3 (ON) without
turning the key to 4 (START).
Make sure the corresponding lights illuminate or illuminate briefly. If a
light fails to illuminate, have the vehicle serviced.
•If th

Page 181 of 264

FORD CROWN VICTORIA 2005 2.G Owners Manual If your vehicle is equipped with a
floor-shift transmission, overdrive
can be deactivated by pressing the
transmission control switch on the
gearshift handle.
The transmission control indicator light
Page:   1-8 9-16 next >