2005 DODGE SPRINTER steering wheel

94 UNDERSTANDING YOUR INSTRUMENT PANELMulti-Function Indicator
WARNING!
Never operate buttons (1, 2, 3 and 4) in the multi-
function indicator while driving.
To operate these buttons the driver must reach
through the steering wheel, which could
significantly impede its movement.
Your attention will also be diverted from the road
and traffic conditions.
This could cause you to lose control of the vehicle
and could lead to an accident and result in severe
personal injuries or death.
For this reason, make sure that the traffic
conditions are safe before pressing the buttons, so
that nobody may be endangered.
When possible, reach around the steering wheel
to operate the multi-function indicator buttons.
Do not rest your head or chest on the steering
wheel or dashboard when operating the buttons.

140 STARTING AND OPERATING

Deactivating the Acceleration Skid
Control (ASR) . . . . . . . . . . . . . . . . . . . . . . . . . . . 168
Brake Assist System (BAS)
(vehicle type 2500 only) . . . . . . . . . . . . . . . . . . . 169
Indicator Lamp Electronic Stability Program
(ESP) (type 2500 vehicles only) . . . . . . . . . . . . 170
Electronic Stability Program (ESP)
(vehicle type 2500 only) . . . . . . . . . . . . . . . . . . . 171


Auxiliary Drive (Optional) . . . . . . . . . . . . . . . . . . 172


Steering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173


Wheels and Tires . . . . . . . . . . . . . . . . . . . . . . . . . . 173
Tire Grip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175
Hydroplaning . . . . . . . . . . . . . . . . . . . . . . . . . . . 175


Tire Pressures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175
Tire Pressures of Loaded Vehicle in PSI (kPa) . . . 177
Vehicle type 2500 C/HC/SHC . . . . . . . . . . . . 177
Vehicle type 3500 C/HC/SHC . . . . . . . . . . . . 177
Comfort Tire Pressures in PSI (kPa) . . . . . . . . 178
Comfort Tire Pressures in PSI (kPa) . . . . . . . . 178


Snow Chains . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179


Fuel Requirements . . . . . . . . . . . . . . . . . . . . . . . . . 179
Fuel Filter with Water Separator . . . . . . . . . . . 180
Diesel Fuels for Use at Very Low
Temperatures . . . . . . . . . . . . . . . . . . . . . . . . . . . 180


Refueling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181
Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182


Programmed Top Speed (Optional) . . . . . . . . . . 182


Bleeding Diesel Fuel System . . . . . . . . . . . . . . . . . 183


Draining Fuel Filter with Water Separator . . . . . 184
Bleeding the Diesel Fuel Syst em . . . . . . . . . . . 185


Permissible Roof Load . . . . . . . . . . . . . . . . . . . . . . 186


Trailer Towing . . . . . . . . . . . . . . . . . . . . . . . . . . . . 186
Trailer Hitches (Optional) . . . . . . . . . . . . . . . . . 186
Electrical Connections (Optional) . . . . . . . . . . 186
Vehicle and Trailer Weights and Ratings . . . . 187
Loading a Trailer . . . . . . . . . . . . . . . . . . . . . . . . 187
Checking Weights of Vehicle and Trailer . . . . 188
Attaching a Trailer . . . . . . . . . . . . . . . . . . . . . . . 188
Towing a Trailer . . . . . . . . . . . . . . . . . . . . . . . . . 189
Parking a Trailer . . . . . . . . . . . . . . . . . . . . . . . . . 191


Emissions Control System (Catalytic Converter) 192


Inhalation of Exhaust Gas . . . . . . . . . . . . . . . . . . . 192


Fording (Wading Capability) . . . . . . . . . . . . . . . . 192


Body Builder Guideline . . . . . . . . . . . . . . . . . . . . . 193
A Special Note Concerning Vehicle
Alteration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 194

162 STARTING AND OPERATINGas the voltage reaches this level again
– the ABS is then
reactivated.
If ABS malfunctions, the other driving safety systems
are deactivated. The handling and braking
characteristics of your vehicle change. The other
braking and driving systems still function normally.
I
Anti-Lock Brake System (ABS)ABS prevents the wheels from locking at any speed
above about 5 mph (8 km/h), regardless of road
surface conditions. The vehicle remains steerable even
if the brakes are applied fully.
A light vibrating of the steering wheel and pulsating of
the brake pedal indicate that the ABS is working.
On slippery road surfaces, the ABS will respond even
with light brake pedal pressure because of the
increased likelihood of locking wheels. The pulsating
brake pedal can be an indication of hazardous road
conditions and works as a reminder to take extra care
while driving.
WARNING!
If the ABS indicator lamp - does not go out or
lights up again while driving, the ABS is malfunc-
tioning. If ABS malfunctions, the other driving
safety systems are deactivated. The vehicle’s brak-
ing characteristics may be affected. There is an in-
creased risk that your vehicle could skid in the
event of sharp braking. Have the malfunction
traced and repaired without delay by an autho-
rized Sprinter Dealer.
Adapt your speed and driving style to the
prevailing road, traffic and weather conditions.
Driving too fast increases the risk of an accident.

STARTING AND OPERATING 173
5
STEERINGWhen the engine is not running, there is no power
assistance for the steering. Greater force will be
required to steer the vehicle.WHEELS AND TIRESCheck tires regularly for even tread wear, tread depth
(note legal requirements) and signs of external
damage.
Only use wheels and tires of the same size, make and
pattern.
Do not install tires that are not approved for the size
and type of wheel installed or the vehicle itself. Only
use those wheel sizes which were delivered to you by
your authorized Sprinter Dealer.
Use only wheels and tires which have been tested and
approved by the vehicle manufacturer. Break in new tires at moderate speeds for a distance of
about 65 miles (about 100 km).
CAUTION!
Power take off must not exceed 10 kW. Exceeding
the power take off may cause damage to the
auxiliary drive and/or ribbed V-belt.
WARNING!
Fitting other wheel sizes to the vehicle will change
the vehicle’s handling characteristics and may
lead to an accident resulting in severe personal in-
juries, death and property damage.
Only certain tires meeting the tire size/load/speed
rating specifications contained in the Tire
Pressure Tables at the end of this chapter are
certified to conform to FMVSS 120 for the Sprinter
vehicle at this time. Please check your side walls
of your originally equipped tires for specific
makes/sizes, and speed load ratings when you
need to replace your tires.
To prevent accident, injury or possible death, use
only the correct tires for your tire replacement.
Do not use retreaded/ remolded tires. This process
does not always permit previous damage to be
detected. Therefore vehicle safety cannot be
guaranteed if retreaded/remolded tires are fitted
.

198 WHAT TO DO IN EMERGENCIESCHANGING THE TIREIf you get a flat tire while driving, gradually decrease
your speed. Hold the steering wheel firmly and slowly
move to a safe place on the side of the road. The
pressure of the spare wheel always has to be checked
regularly (at least after every tenth time at the filling
station).
WARNING!
Only certain tires meeting the tire size/load/speed
rating specifications contained in the Tire Pres-
sure Tables are certified to conform to FMVSS 120
for the Sprinter vehicle at this time. Please check
your side walls of your originally equipped tires
for specific makes/sizes, and speed load ratings
when you need to replace your tires.
To prevent accident, injury or possible death, use
only the correct tires for your tire replacement.
WARNING!
The jack is designed exclusively for jacking up the
vehicle at the jack take-up brackets built into ei-
ther side of the vehicle. To help avoid personal in-
jury, use the jack only to lift the vehicle during a
wheel change. Never get beneath the vehicle
while it is supported by the jack only.
Keep hands and feet away from the area under the
lifted vehicle. Always firmly set parking brake
and block wheels before raising vehicle with jack.
Do not disengage parking brake while the vehicle
is raised.
Always use the jack on a level surface.
Do not change wheels on either steep uphill or
downhill grades. Be sure that the jack arm end is
fully seated in the jack take-up bracket. The
vehicle may begin to move and fall from the jack
which could cause serious or fatal personal injury
and property damage.
Always lower the vehicle onto sufficient capacity
jack stands before working under the vehicle.

WHAT TO DO IN EMERGENCIES 211
6
TOWING THE VEHICLE
*Vehicle Type 2500 only
WARNING!
Do not tow the vehicle if the key cannot be turned
in the ignition lock.
If the key cannot be turned, the ignition lock re-
mains locked and the vehicle cannot be steered.
With the engine not running there is no power
assistance for the braking and steering systems.
In this case, it is important to keep in mind that a
considerably higher degree of effort is necessary
to brake and steer the vehicle.
The vehicle must not be towed with the front axle
raised and the key in position 2 in the ignition
lock as the drive wheels could then lock due to the
acceleration skid control (ASR) or the optional
Electronic Stability Program (ESP)
*.

214 MAINTAINING YOUR VEHICLE

Headlamps, Taillamps, Identification Lamps,
Turn Signal Lenses . . . . . . . . . . . . . . . . . . . . . . . 234
Reversing Aid Sensors . . . . . . . . . . . . . . . . . . . . 235
Window Cleaning . . . . . . . . . . . . . . . . . . . . . . . 235
Wiper Blade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 236
Light Alloy Wheels . . . . . . . . . . . . . . . . . . . . . . 236
Instrument Cluster . . . . . . . . . . . . . . . . . . . . . . . 236
Steering Wheel and Gear Selector Lever . . . . 236
Cup Holder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 237
Seat Belts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 237
Headliner and Shelf Below Rear Window . . . 237
Upholstery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 237
Hard Plastic Trim Items . . . . . . . . . . . . . . . . . . 237
Plastic and Rubber Parts . . . . . . . . . . . . . . . . . . 238


Electrical Fuses . . . . . . . . . . . . . . . . . . . . . . . . . . . . 238
Standard Fuse and Relay Equipment . . . . . . . 239
Relay Assignment, Standard Equipment . . . . 242
Fuse and Relay Optional Equipment . . . . . . . 242


Bulb Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . 245
Front Lamp Unit . . . . . . . . . . . . . . . . . . . . . . . . . 245
Taillamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 250
License Plate Lamps
(Cargo/Passenger Vans Only) . . . . . . . . . . . . . 252
Additional Brake Lamp
(Cargo/Passenger Vans Only) . . . . . . . . . . . . . 252
Side-Mounted Turn Signals . . . . . . . . . . . . . . . 253
Side-Marker Lamps,
Standing Lamps (Optional) . . . . . . . . . . . . . . . . 253
Identification Lamps (Cargo/
passenger vans only) . . . . . . . . . . . . . . . . . . . . . 254
Interior Lighting in Passenger Compartment
and Load Compartment . . . . . . . . . . . . . . . . . . 254
Interior Lighting with Reading Lamp . . . . . . . 255
Interior Lighting with Interior Sensor
Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 255
Exit Lamps (Optional) . . . . . . . . . . . . . . . . . . . . 256


Capacities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 257
Recommended Fluids and Lubricants . . . . . . 258

236 MAINTAINING YOUR VEHICLEWiper BladeClean the wiper blade rubber with a clean cloth and
detergent solution.
Light Alloy WheelsA wheel care product should be used for regular
cleaning of the light alloy wheels.
If possible, clean wheels once a week, using a soft
bristle brush and a strong spray of water.
Follow instructions on container.
NOTE: Use only acid-free cleaning materials. The acid
could lead to corrosion.Instrument ClusterUse a gentle dishwashing detergent or mild detergent
for delicate fabrics as a washing solution. Wipe with a
cloth moistened in lukewarm solution. Do not use
scouring agents.Steering Wheel and Gear Selector LeverWipe with a damp cloth and dry thoroughly or clean
with a leather care product.
WARNING!
For safety reasons, remove key from ignition lock
before cleaning the windshield, otherwise the
wiper motor can suddenly turn on and cause in-
jury.
Dirty or iced-up steps create a risk of slipping or
falling. Do not use the step in the front bumper
when it is icy or dirty.
WARNING!
For safety reasons, remove key from ignition lock
before cleaning the wiper blade, otherwise the
wiper motor can suddenly turn on and cause se-
vere personal injuries and death.