WHAT TO DO IN EMERGENCIES
CONTENTS
Hazard Warning Lights..................334
Adding Fuel..........................335
Jack Location..........................336
▫All Models..........................336
Changing A Flat Tire....................337
▫Removing The Spare Tire................337
▫Tire Changing Procedure................338Hoisting.............................343
Jump-Starting.........................344
Freeing A Stuck Vehicle..................347
Emergency Tow Hooks—If Equipped........347
Towing A Disabled Vehicle................348
▫4-Wheel-Drive Vehicles.................348
Winch Usage..........................348
6
the nut opposite to the nut just previously tightened until
final torque is achieved. Recommended torques are
shown in the following chart.
Disc
WheelsType Nut Stud Size Torque
Ft. Lbs.Torque
Newton
Meters
Cone 9/16-18 120-150 160-200
Flanged 9/16-18 130-160 190-220
To Stow The Flat Or Spare
Turn the wheel so that the valve stem is down. Slide the
wheel retainer through the center of the wheel and
position it properly across the wheel opening.
For convenience in checking the spare tire inflation, stow
with the valve stem toward the rear of the vehicle.
Attach the wheel wrench to the extension tube. Rotate the
winch mechanism until the wheel is drawn into place
against the underside of the vehicle. Continue to rotate
until you feel the winch mechanism slip or click 3 or 4times. It cannot be overtightened. Push against the tire
several times to be sure it is firmly in place.
HOISTING
A conventional floor jack may be used at the jacking
locations, refer to the graphics that show jacking loca-
tions. However, a floor jack or frame hoist must never be
used on any other parts or the underbody.
CAUTION!
Never use a floor jack directly under the differential
housing of a loaded truck or damage to your vehicle
may result.
WHAT TO DO IN EMERGENCIES 343
6
