2005 Citroen XSARA PICASSO Toe in

Downloaded from www.Manualslib.com manuals search engine 363
AXLES
SUSPENSION
STEERING
C4
363
A < B = Positive figure: + = TOE-IN
A > B = Negative figure: - = TOE-OUTNOTE
AXLE GEOMETRY
Front axle
Dissymmetry of lower castor 0° 30'.
Dissymmetry of lower camber 0° 30'.
Distribute symmetrically, LH / RH wheel, the total tracking value.
EnginesET3J4 - TU5JP EW10
DW10BTED4EW10DV6
DV6 DV6 DW10BTED4
Tyres195/65 R 15 205/55 R 16 205/50 R 17
Camber
(± 0° 30’)0°
Castor
(± 0° 30’)No adjustable 5° 5° 09’ 5° 12’
Pivot angle
(± 0° 30’)11° 41’
Tracking Adjustable- 2,5 ± 1 mm
- 0° 23’ ± 0° 09’ - 0° 21’ ± 0° 09’ - 0° 20’ ± 0° 08’
NOTE:Front of the vehicle (following arrow).B3CP02UC
Angl.-t2-page361-397-2005 9/01/06 10:22 Page 363

Downloaded from www.Manualslib.com manuals search engine AXLES
SUSPENSION
STEERING
C4
A < B = Positive figure: + = TOE-IN
A > B = Negative figure: - = TOE-OUTNOTE
AXLE GEOMETRY
Rear axle
Dissymmetry of lower camber 0° 30'.
EnginesET3J4 - TU5JP EW10DV6 EW10DV6
DV6 DW10BTED4 DW10BTED4
Tyres195/65 R 15 205/55 R 16 205/50 R 17
Camber
(± 0° 30’)No adjustable 1° 45’
Push angle
(± 0° 06’)0°
Tracking Adjustable6,5 ± 1 mm
0° 59’ ± 0° 09’ 0° 55’ ± 0° 09’ 0° 52’ ± 0° 08’
NOTE: Front of the vehicle (following arrow).B3CP02UC
364
Angl.-t2-page361-397-2005 9/01/06 10:22 Page 364

Downloaded from www.Manualslib.com manuals search engine 377
AXLES
SUSPENSION
STEERING
ESSENTIAL: When checking the suspensions, the vehicle should be at reference height.
XSARA
AXLE GEOMETRY
Values of the front and rear suspensions, at reference height - RPO 8667 #
Tools used.
Compress the suspension, to obtain the values at reference height.
[1]Set of two suspension compressors: 9511-T.A
[2]Set of four straps: 9511-T.B
[3] Set of four shackles: 9511T.C
A> B =Negative figure: – = TOE-OUT A < B = Positive figure: + = TOE-INNOTE
B3CP04LC
Angl.-t2-page361-397-2005 9/01/06 10:22 Page 377

Downloaded from www.Manualslib.com manuals search engine 378
AXLES
SUSPENSION
STEERING
AXLE GEOMETRY XSARA
Values of the front and rear suspensions, at reference height
RPO 8667 #Front axle
Saloon / Estate
Saloon or Entreprise
All engines (exceptSaloon TU3JPSaloon / Estate CRD
Tolerances Adjustable
All TU3JP engines
TU3JP/CRD)CRD (*)All engines
(except TU3JP)
Tracking±1 mm
YES- 1,5 ± 1 mm
- 0°15' ± 10' (toe-out)
Castor ± 18' 3° 2°55' 2°55'
Pivot angle ± 30' NO 10°40' 10°44' 10°22' 10°26'
Camber ± 30' 0° 0°12' 0°07'
Rear axle
Saloon / Estate CRD (*)
Tolerances AdjustableSaloon all engine types
Estate all engine types all engine types Saloon entreprise
Tracking± 1,3 mm
YES4,54 ± 1,3 mm 4,27 ± 1,3 mm 3,45 ± 1,3 mm
0° 41' ± 11' 0° 39' ± 11' 0° 31' ± 10'
Camber ± 15' NO - 0°57' - 0°58' - 0°59'
(*) CRD = Difficult road conditions.
Angl.-t2-page361-397-2005 9/01/06 10:22 Page 378

Downloaded from www.Manualslib.com manuals search engine 390
AXLES
SUSPENSION
STEERING
A> B =Negative figure: – = TOE-OUT A < B = Positive figure: + = TOE-INNOTE
AXLE GEOMETRY
Measurements at reference height (compress the suspension to obtain the calculated values).
Vehicles all engine versions (except CRD (*))
Front axle Rear axle
Vehicle Tracking CastorPivot angleCamber Tracking Camber
Adjustable Yes No
ALL TYPES0 ± 1 mm4,8 ± 1,3 mm
- 0°09’ à + 0°09’3° ± 18’ 10°43’ ± 30’ 0° ± 30’
- 0°43’ ± 0°12’- 1°13’ ± 18’
XSARA PICASSO
B3CP02UC
Angl.-t2-page361-397-2005 9/01/06 10:22 Page 390

Downloaded from www.Manualslib.com manuals search engine 392
AXLES
SUSPENSION
STEERING
A> B =Negative figure: – = TOE-OUT A < B = Positive figure: + = TOE-INNOTE
AXLE GEOMETRY
Measurements at reference height (compress the suspension to obtain the calculated values).
Vehicles all engine versions (except CRD (*))
Front axle Rear axle
Vehicle Tracking CastorPivot angleCamber Tracking Camber
Adjustable Yes No
ALL TYPES- 1 ± 1 mm3,7 ± 1,3 mm
- 0°18’ à 0°0’2°56’ ± 18’ 10°25’ ± 30’ 0°07’ ± 30’
- 0°33’ ± 0°12’- 1°14’ ± 18’
XSARA PICASSO
B3CP02UC
Angl.-t2-page361-397-2005 9/01/06 10:22 Page 392