2005 Citroen C4 Camshaft

Downloaded from www.Manualslib.com manuals search engine 131
ENGINE
SPECIAL FEATURES - TIGHTENING TORQUES (m.daN)
Crankshaft
Bearing cap fixing screws7 ± 0,7
Con rod nuts
Pre-tightening2 ± 0,2
Angular tightening70°±5°
Accessories drive pulley hub
Pre-tightening4 ± 0,2
Angular tightening55°±5°
Accessories drive pulley1 ± 0,1
Cylinder block
Piston skirt spray jet1 ± 0,1
Sump1,6 ± 0,1
Timing belt guide roller4,3 ± 0,4
Timing belt tensioner roller2,1 ± 0,2
Cylinder head
Camshaft bearing covers2 ± 0,2
Exhaust manifold0,3
Valve cover0,5
Camshaft / hub4,3 ± 0,4
Camshaft pinion / hub2,3 ± 0,2 Engine: WJY
XSARA
Angl.-t2-page040-134-2005 9/01/06 10:11 Page 131

Downloaded from www.Manualslib.com manuals search engine 132
ENGINESPECIAL FEATURES - TIGHTENING TORQUES (m.daN)
Crankshaft
Bearing cap fixing screws7 ± 0,7
Con rod nuts
Pre-tightening2 ± 0,2
Angular tightening70°±5°
Accessories drive pulley hub
Pre-tightening4 ± 0,2
Angular tightening55°±5°
Accessories drive pulley1 ± 0,1
Cylinder block
Piston spray jet1 ± 0,1
Sump1,6 ± 0,1
Timing belt guide roller4,3 ± 0,4
Timing belt tensioner roller2,1 ± 0,2
Cylinder head
Camshaft bearing covers2 ± 0,2
Exhaust manifold3 ± 0,3
Valve cover0,5
Camshaft / hub4,3 ± 0,4
Camshaft pinion / hub2,3 ± 0,2 Engine: WJY
XSARA
Angl.-t2-page040-134-2005 9/01/06 10:11 Page 132

Downloaded from www.Manualslib.com manuals search engine 135
ENGINE
SPECIAL FEATURES - TIGHTENING TORQUES (m.daN)
Crankshaft
Bearing cap fixing screws
Pre-tightening2,5 ± 0,2
Angular tightening60°±5°
Con rod nuts
Pre-tightening2 ± 0,2
Angular tightening70°±5°
Accessories drive pulley hub
Pre-tightening4 ± 0,2
Angular tightening51°±5°
Cylinder block
Piston skirt spray jet1 ± 0,1
Sump1,6 ± 0,1
Timing belt guide roller4,3 ± 0,4
Timing belt tensioner roller2,5 ± 0,2
Cylinder head
Camshaft bearing covers1 ± 0,1
Exhaust manifold2 ± 0,2
Valve cover0,8
Camshaft / hub4,3 ± 0,4
Camshaft pinion / camshaft hub2 ± 0,2 Engines: RHY - RHZ
XSARA
Angl.-t2-page135-239-2005 9/01/06 10:13 Page 135

Downloaded from www.Manualslib.com manuals search engine 139
ENGINE
SPECIAL FEATURES - TIGHTENING TORQUES (m.daN)
Cylinder head
5 Camshaft bearing cap cover screws (*) 1 ± 0,1
6 Coolant outlet housing fixing 2 ± 0,2
Camshaft bearing cap cover studs (*)
7Pre-tightening (the 26 screws Ø 6)0,5
Tightening (the 26 screws Ø 6)1 ± 0,1
8 Inlet valve cover screws (*) (19 screws) 0,9 ± 0,1
Engine: RHR
B1DP1LCP
C4
Angl.-t2-page135-239-2005 9/01/06 10:13 Page 139

Downloaded from www.Manualslib.com manuals search engine 140
ENGINESPECIAL FEATURES - TIGHTENING TORQUES (m.daN)
Engine: RHR
B1DP1LED
(*) Bolts (5) and (7) Sequence of tightening(*) Bolts (8) Sequence of tightening
Cylinder head
(5) Camshaft bearing cap cover screws
(7) Camshaft bearing cap cover studs(8) Inlet valve cover screws
B1BP38ZD
C4
Angl.-t2-page135-239-2005 9/01/06 10:13 Page 140

Downloaded from www.Manualslib.com manuals search engine 145
ENGINE
SPECIAL FEATURES - TIGHTENING TORQUES (m.daN)
Timing
Camshaft drive pulley screw
25Tightening7 ± 0,7
Angular tightening60°±5°
Guide roller screw
26Pre-tightening1,5
Tightening4,3 ± 0,427 Tensioner roller screw 2,1 ± 0,2
Engine: RHR
B1EP1HPD
C4
Angl.-t2-page135-239-2005 9/01/06 10:13 Page 145

Downloaded from www.Manualslib.com manuals search engine 185
ENGINE
Tools.
[1]Flywheel peg: 4507-T.A
[2] Camshaft pulley peg: 4507-T.B Toolkit 4507-T
[3]Square: 4507-T.J
[4] Belt tension measuring instrument: 4122-T
[5] Valve rocker thrust plate: 4533-T.Z
Checking the timing.
Peg the flywheel, using tool [1].
Peg the camshaft pulley, using tool [2].
Setting the timing.
NOTE:Remove the sparking plugs, to ease rotation of the crankshaft.
Rotate the engine by means of the crankshaft screw (1).
Peg the camshaft pinion.
Peg the flywheel
Slacken the nut (2).
Fullt detension the belt by acting on the tensioner roller.
Remove the belt.
IMPERATIVE: Check that the tensioner roller turns freely
(no tight spot).
CHECKING AND SETTING THE VALVE TIMING
Engines: KFW - NFV
B1EP067CB1EP066CB1EP068C
XSARA - XSARA PICASSO
Angl.-t2-page135-239-2005 9/01/06 10:14 Page 185

Downloaded from www.Manualslib.com manuals search engine 186
ENGINECHECKING AND SETTING THE VALVE TIMING
Engines: KFW - NFV
Refitting the timing belt.
NOTE :Check that the pegs [1]and [2]are in place.
WARNING: Respect the direction of fitting of the belt: The arrows "a" indicate the direction of rotation of
the crankshaft.
Position:
-The timing belt, belt "b"well-tensioned in the following order: Crankshaft pinion, camshaft pulley, coolant pump
pulley, tensioner roller.
- Tool [5]
(respect the direction of fitting relative to the valve timing).
- Put the tensioner roller in contact with the belt.
- Tighten the nut (2).
Pre-tensioning the belt.
Place tool [4] on the tensioned part "b"of the belt.
Slacken the screw (2).
Turn the roller (3)in the anti-clockwise direction using the drive square, to obtain a value of: 44 SEEMunits.
Tighten the nut (2) to 2 m.daN.
Remove tools [1], [2] and [4].
Rotate the crankshaft 4 turnsin the normal direction of rotation.
IMPERATIVE: Never turn the crankshaft backwards.
B1EP06AC
B1EP069C
XSARA - XSARA PICASSO
Angl.-t2-page135-239-2005 9/01/06 10:14 Page 186