2005 Citroen C4 C4 rfj

Downloaded from www.Manualslib.com manuals search engine 65
ENGINE
SPECIAL FEATURES - TIGHTENING TORQUES (m.daN)
Cylinder block
17 Oil circuit plugs 3 ± 0,3
Coolant pump screw (*)
18Pre-tightening0,8
Tightening1,4 ± 0,1
19 Cooling circuit plug 3 ± 0,3
Accessories drive belt pulley screw
20Tightening4 ± 0,4
Angular tightening40°±4°
Flywheel screw (*)
21Pre-tightening0,8 ± 0,1
Tightening2 ± 0,2
Angular tightening21°± 3°
Engine: RFJ
B1DP1KSP
(*) = IMPERATIVE: Respect the tightening sequence (see following page).
C4
Angl.-t2-page040-134-2005 9/01/06 10:11 Page 65

Downloaded from www.Manualslib.com manuals search engine 66
ENGINESPECIAL FEATURES - TIGHTENING TORQUES (m.daN)
Cylinder block
Crankshaft bearing cap cover screw (*)
Pre-tightening1
22Tightening2 ± 0,2
Angular tightening72°±5°
23 Crankshaft bearing cap sealing screw 1
Con rod cap screw (*)
Pre-tightening1
24Tightening2,3 ± 0,2
Angular tightening46°±5°
25 Knock sensor 2 ± 0,5
Engine: RFJ
B1DP1KSP
(*) = IMPERATIVE: Respect the tightening sequence (see following page).
C4
Angl.-t2-page040-134-2005 9/01/06 10:11 Page 66

Downloaded from www.Manualslib.com manuals search engine 67
ENGINE
SPECIAL FEATURES - TIGHTENING TORQUES (m.daN)
Engine: RFJ
B1GP08WCB1DP05BC
IMPERATIVE: Respect the tightening sequence.
Cylinder head
(22) Crankshaft bearing cap screws
(24) Con rod cap screws(21) Flywheel screw(18) Coolant pump screw
B1CP0GCC
C4
Angl.-t2-page040-134-2005 9/01/06 10:11 Page 67

Downloaded from www.Manualslib.com manuals search engine 68
ENGINESPECIAL FEATURES - TIGHTENING TORQUES (m.daN)
Lubrication
26 Oil gauge screw 1 ± 0,2
27 Oil filter support screw 0,8 ± 0,1
28 Anti-emulsion plate fixing screw 1,9 ± 0,3
29 Oil level sensor fixing screw 1 ± 0,2
30 Drain plug 3,4 ± 0,3
31 Oil sump screw 0,8 ± 0,1
32 Oil pressure switch 2 ± 0,2
33 Oil strainer fixing nuts 0,8 ± 0,1
34 Oil strainer stud 0,6 ± 0,1
Coolant pump screw
35Pre-tightening0,7
Tightening1 ± 0,1
Engine: RFJ
B1BP35NP
C4
Angl.-t2-page040-134-2005 9/01/06 10:11 Page 68

Downloaded from www.Manualslib.com manuals search engine 69
ENGINE
SPECIAL FEATURES - TIGHTENING TORQUES (m.daN)
Timing
Exhaust camshaft pulley screw
36Pre-tightening3 ± 0,5
Tightening8,5 ± 0,5
37 Cap 1,1 ± 0,1
Inlet camshaft pulley screw
38Pre-tightening2 ± 0,2
Tightening11 ± 1
39 Tensioner roller screw 2,1 ± 0,2
Guide roller screw
40Pre-tightening1,5 ± 0,1
Tightening3,7 ± 0,7
Engine: RFJ
B1EP1GJP
C4
Angl.-t2-page040-134-2005 9/01/06 10:11 Page 69

Downloaded from www.Manualslib.com manuals search engine 70
ENGINESPECIAL FEATURES - TIGHTENING TORQUES (m.daN)
Accessories
41 Accessories support fixing stud 0,8 ± 0,1
Accessories support fixings
42Pre-tightening1 ± 0,1
Tightening1,9 ± 0,2
43 Alternator top fixing screw 4,1 ± 0,5
44 Alternator power circuit fixing nut 1,7 ± 0,2
45 Aircon compressor fixing screw 2,3 ± 0,3
46 Alternator bottom fixing screw 4,9 ± 0,5
47 Screw for fixing the automatic tensioner roller
for the accessories drive belt2 ± 0,2
Engine: RFJ
B1BP35PP
C4
Angl.-t2-page040-134-2005 9/01/06 10:11 Page 70

Downloaded from www.Manualslib.com manuals search engine 148
ENGINESPECIAL FEATURES - CYLINDER HEAD TIGHTENING
Engines all types
B1DP05BC
Cleaning to be carried out just prior to refitting the cylinder head.
WARNING: Clean the contact faces with the approved CITROËN cleaning product.
Do not use abrasives or cutting tools on the contact faces.
The contact faces must not bear any traces of impact or scratching.
Insert a tap in the threads of the holes in the cylinder block receiving the cylinder head bolts.
Brush the threads of the cylinder head bolts..
Oil the threads and under the heads of the bolts, usingMOLYKOTE G RAPID PLUS.
EnginesTightening Cylinder head bolts
(m.daN)(Max. reusable length in mm)
NFUTightening2 ± 0,2
Angular tightening260° ± 5°122 ± 0,3
Pre-tightening1,5 ± 0,2
KFUTightening2,5 ± 0,2 119
Angular tightening200° ± 5°
6FZ - RFNPre-tightening1,5 ± 0,1
147
Tightening5 ± 0,1
RFJAngular slackening360° ± 2° 127,5 ± 0,5
Tightening2 ± 0,75
RFKAngular tightening285° ± 5° 144,5 ± 0,5
NOTE: Tightening of the cylinder head after a repair is prohibited.
Angl.-t2-page135-239-2005 9/01/06 10:13 Page 148

Downloaded from www.Manualslib.com manuals search engine 152
ENGINEAUXILIARY EQUIPMENT DRIVE BELT
TU
JP
3
J410
A J4S
Engine type
C4
XSARA
XSARA PICASSO
See pages:
KFW KFU NFV NFU 6FZ RFJ RFN RFK
XX XXX
XX X
XX X
155 156 to 157 158 156 to 157 160 162 161 163 162 164EW
5
J4 7 ETTUJP4 J4JP+
Angl.-t2-page135-239-2005 9/01/06 10:13 Page 152