2005 CHEVROLET SSR high beam

[x] Cancel search: high beam

Page 119 of 388

CHEVROLET SSR 2005 1.G Owners Manual Instrument Panel Overview...............................3-4
Hazard Warning Flashers................................3-5
Other Warning Devices...................................3-5
Horn.................

Page 120 of 388

CHEVROLET SSR 2005 1.G Owners Manual Change Engine Oil Light................................3-37
Security Light...............................................3-37
Cruise Control Light......................................3-37
Reduced Eng

Page 124 of 388

CHEVROLET SSR 2005 1.G Owners Manual Horn
To sound the horn, press the horn symbol on the
steering wheel pad.
Tilt Wheel
A tilt wheel allows you to adjust the steering wheel before
you drive. You can raise it to the highest level to allo

Page 126 of 388

CHEVROLET SSR 2005 1.G Owners Manual Headlamp High/Low-Beam Changer
To change the headlamps from low to high beam,
push the lever toward the instrument panel. To return
to low-beam headlamps, pull the multifunction lever
toward you. Then

Page 133 of 388

CHEVROLET SSR 2005 1.G Owners Manual There is a delay in the transition between the daytime
and nighttime operation of the Daytime Running
Lamps (DRL) and the automatic headlamp systems so
that driving under bridges or bright overhead st

Page 156 of 388

CHEVROLET SSR 2005 1.G Owners Manual Reduced Engine Power Light
This light is displayed
when a noticeable
reduction in the vehicles
performance may occur.
The vehicle may be driven at a reduced speed when
the reduced engine power light

Page 218 of 388

CHEVROLET SSR 2005 1.G Owners Manual You can be temporarily blinded by approaching
headlamps. It can take a second or two, or even
several seconds, for your eyes to re-adjust to the dark.
When you are faced with severe glare, as from a
d

Page 295 of 388

CHEVROLET SSR 2005 1.G Owners Manual 3. Turn the bulb socket counterclockwise to remove it
from the headlamp assembly.
There are separate sockets for the high and
low-beam headlamps.
4. Pull the bulb socket out of the headlamp assembly.5
Page:   1-8 9-16 next >