Getting to Know YourLeSabre6
Climate Controls
Dual Automatic ComforTemp Climate
Control
AUTO:
Press this button to make the
system automatically adjust to changesin temperature inside the vehicle.
TEMP:Press this button’s up or down
arrow to increase or decrease the interi or temperature.
FAN:Press this button’s up or down
arrow to increase or decrease blowerfan speed.
AIR FLOW:Press this button’s up or
down arrow to select airflow direction tothe FLOOR, MID FLOOR, MID andWINDSHIELD FLOOR.
Display
The display indicates the outside tem
perature, your interior temperature set ting selection, current airflow directionsettings and fan speed.
VENT:Press this button to allow outside
air to flow through the vehicle. Press the
button again to turn the vent off.
FRONT:Press this button to defrost the
windshield.
REAR:Press this button to defog the
rear window. At speeds above 30 mph(48 km/h), the defogger will stay on untilyou press the button again. At speeds
below 30 mph (48 km/h), the defogger
will turn off automatically.
RECIRC:Press this button to limit the
amount of outside air entering the vehicle.
OFF:Press this button once to turn off
the passenger comfort control system.
Press the button twice to turn off themain system.
Personal Choice Comfort Controls
(if equipped)
This feature allows two different drivers
to recall their own climate control
settings.
The settings that are recalled are the
last choices of the driver prior to exitingthe vehicle, and are recalled by pressingthe key fob/transmitter unlock button orby pressing one of the memory buttons
on the driver’s door panel.
Passenger Climate Control
The controls for this feature are located
on the passenger’s door armrest. Pressthe red arrow to raise the inside temperature on the passenger side.Press the blue arrow to decrease theinterior air temperature on the
passenger side. You can adjust the temperature up to 5˚F cooler or warmerthan the driver’s setting.
See Section 3 of your Owner Manual.
Getting to Know YourLeSabre16
Driver Memory Seat and Mirrors
(if equipped)
With the vehicle in Park (P), adjust
the driver’s seat, including the lumbar
position (if equipped) and both outside
mirrors to a comfortable position. This feature also recalls the radio and
climate control settings. However, itdoes not include the power headrestraint settings.
• Press and hold the appropriate
Driver/MEMORY button (located on
the driver’s door panel), to corre
spond with the DIC Driver number,until you hear two beeps.
•Follow the previous step with the
other key fob/transmitter to set up for
a second driver, and select the other
Driver/MEMORY button.
•Press and release the EXIT button.
With the transaxle in Park (P), the
seat will move all the way back or toyour personalized exit position.
To recall the memory seat and mirrors
using the key fob/transmitter, programthe DIC Seat Recall feature to ON.
See Section 2 of your Owner Manual.
Driver Information Center (DIC)
(if equipped)
The DIC displays information about how
your vehicle is functioning and showswarnings and messages if a systemproblem is detected.
StabiliTrak®Message
When the “STABILITY SYS ACTIVE”
message appears, a computer controlled system is automatically activated. Some brake pedal noise or
vibration is normal. (StabiliTrak is anoptional feature.)
DIC Button Descriptions
• Press the ODO/TRIP button to dis
play the vehicle’s total mileage, and
Trip 1 or Trip 2 miles. Press theODO/TRIPbutton for the appropriate
trip number; then press the RESET
button to reset the trip odometer.
•Press the FUELINFO button to dis
play fuel economy, fuel average, fuelinstantaneous, fuel range and fuel
used. Press the ODO/TRIP button forthe appropriate trip number; thenpress the RESETbutton while the
average fuel economy is displayed inthe DIC to learn what the averagefuel economy is from a new startingpoint.
