2005 BMW MOTORRAD K 1200 S brake fluid

the bore 1in the inboard
brake block.
If the brake disc is visible: Have the brake pads re-
placed by a specialist work-
shop, preferably an author-
ised BMW Motorrad dealer.Brake fluidChecking brake-fluid
level, front brakes
A low fluid level in the
brake reservoir can al-
low air to penetrate the brake
system. This significantly re-
duces braking efficiency.
Apply the brakes in good
time.
Make sure the ground is
level and firm and hold the
motorcycle upright.
Move the handlebars to the
straight-ahead position. with OA Centre stand:
Make sure the ground is
level and firm and place
the motorcycle on its centre
stand.
Move the handlebars to the
straight-ahead position.
Check the brake fluid level
in reservoir 1.
The brake fluid level
in the reservoir does
not drop as the brake pads
wear. Brake fluid level, front
DOT4 brake fluid
Do not permit the brake flu-
id level to drop.
Any drop in brake fluid level,
even if the level remains
above the MIN mark, is
indicative of a fault in the
brake system. Have the fault rectified as
soon as possible by a spe-
cialist workshop, preferably
an authorised BMW Motor-
rad dealer.
797zMaintenance

with OE No BMW Motorrad
Integral ABS:Check the brake fluid level
in reservoir 1.
The brake fluid level in
the brake fluid reser-
voir drops as the brake pads
wear. Brake fluid level, front
with OE No BMW Motorrad
Integral ABS:
DOT4 brake fluid
Do not permit the brake flu-
id level to drop below the
MIN mark.
If the brake fluid level drops
below the permitted level: Have the fault rectified as
soon as possible by a spe-
cialist workshop, preferably
an authorised BMW Motor-
rad dealer.
Checking brake-fluid
level, rear brakes
A low fluid level in the
brake reservoir can al-
low air to penetrate the brake
system. This significantly re-
duces braking efficiency.
Apply the brakes in good
time.
Make sure the ground is
level and firm and place the
motorcycle on its stand.
Check the brake fluid level
in reservoir 1.
798zMaintenance

The brake fluid level
in the reservoir does
not drop as the brake pads
wear.
Brake fluid level, rear
DOT4 brake fluid
Do not permit the brake flu-
id level to drop.
Any drop in brake fluid level,
even if the level remains
above the MIN mark, is
indicative of a fault in the
brake system. Have the fault rectified as
soon as possible by a spe- cialist workshop, preferably
an authorised BMW Motor-
rad dealer.
with OE No BMW Motorrad
Integral ABS:
Check the brake fluid level
in reservoir 1.
The brake fluid level in
the brake fluid reser-
voir drops as the brake pads
wear. Brake fluid level, rear
with OE No BMW Motorrad
Integral ABS:
DOT4 brake fluid
Do not permit the brake flu-
id level to drop below the
MIN mark.
If the brake fluid level drops
below the permitted level: Have the fault rectified as
soon as possible by a spe-
cialist workshop, preferably
an authorised BMW Motor-
rad dealer.
799zMaintenance

Paint careWashing the motorcycle
regularly will help counteract
the long-term effects of
substances that damage
the paint, especially if your
motorcycle is ridden in areas
with high air pollution or
natural sources of dirt, for
example tree resin or pollen.
Remove particularly
aggressive substances
immediately, however, as
otherwise the paint can
be affected or become
discoloured. Substances
of this nature include spilt
fuel, oil, grease, brake fluid
and bird droppings. We
recommend BMW vehicle
polish or BMW paint cleaner
for this purpose.
Marks on the paintwork are
particularly easy to see after
the motorcycle has been
washed. Remove stains ofthis kind immediately, using
cleaning-grade benzene or
petroleum spirit on a clean
cloth or ball of cotton wool.
We recommend that specks
of tar be removed with BMW
tar remover. Remember to
wax the parts treated in this
way.
Protective wax coat-
ingFor the protective wax coating
of paint, we recommend that
you use only BMW vehicle
wax or agents that contain
carnauba wax or synthetic
waxes.
It is time to rewax the paint-
work when water "puddles"
on the surface, instead of
forming beads.
Laying up the motor-
cycleClean the motorcycle.
Remove the battery.
Spray the brake and clutch
lever pivots and the main
and side stand pivots with a
suitable lubricant.
Coat bright metal and
chrome-plated parts with
an acid-free grease (e.g.
Vaseline).
Stand the motorcycle in a
dry room in such a way that
there is no load on either
wheel.
Before laying the vehicle
up out of use, have the
engine oil and the oil filter ele-
ment changed by a special-
ist workshop, preferably an
authorised BMW Motorrad
dealer. Combine work for lay-
ing up/restoring to use with a
BMW service or inspection.
8128zCare

Confirmation of maintenance workBMW Pre-delivery
CheckCarried out in accord-
ance with manufacturer's
instructions
Date, stamp, signature
BMW Running-in
CheckCarried out in accord-
ance with manufacturer's
instructions
Odometer reading
Brake fluid, newWithout BMW Integ-
ral ABS
With BMW Integral
ABSWheel circuit
Control circuit
Date, stamp, signature
10147zService

BMW Service
BMW Annual In-
spection
BMW Service
BMW Inspection
Carried out in accord-
ance with manufacturer's
instructions
Odometer reading
Brake fluid, new Without BMW Integ-
ral ABS
With BMW Integral
ABS
Wheel circuit
Control circuit
Date, stamp, signature
BMW Service
BMW Annual In-
spection
BMW Service
BMW Inspection
Carried out in accord-
ance with manufacturer's
instructions
Odometer reading
Brake fluid, new Without BMW Integ-
ral ABS
With BMW Integral
ABS
Wheel circuit
Control circuit
Date, stamp, signature
BMW Service
BMW Annual In-
spection
BMW Service
BMW Inspection
Carried out in accord-
ance with manufacturer's
instructions
Odometer reading
Brake fluid, new Without BMW Integ-
ral ABS
With BMW Integral
ABS
Wheel circuit
Control circuit
Date, stamp, signature
10148zService

BMW Service
BMW Annual In-
spection
BMW Service
BMW Inspection
Carried out in accord-
ance with manufacturer's
instructions
Odometer reading
Brake fluid, new Without BMW Integ-
ral ABS
With BMW Integral
ABS
Wheel circuit
Control circuit
Date, stamp, signature
BMW Service
BMW Annual In-
spection
BMW Service
BMW Inspection
Carried out in accord-
ance with manufacturer's
instructions
Odometer reading
Brake fluid, new Without BMW Integ-
ral ABS
With BMW Integral
ABS
Wheel circuit
Control circuit
Date, stamp, signature
BMW Service
BMW Annual In-
spection
BMW Service
BMW Inspection
Carried out in accord-
ance with manufacturer's
instructions
Odometer reading
Brake fluid, new Without BMW Integ-
ral ABS
With BMW Integral
ABS
Wheel circuit
Control circuit
Date, stamp, signature
10149zService

BMW Service
BMW Annual In-
spection
BMW Service
BMW Inspection
Carried out in accord-
ance with manufacturer's
instructions
Odometer reading
Brake fluid, new Without BMW Integ-
ral ABS
With BMW Integral
ABS
Wheel circuit
Control circuit
Date, stamp, signature
BMW Service
BMW Annual In-
spection
BMW Service
BMW Inspection
Carried out in accord-
ance with manufacturer's
instructions
Odometer reading
Brake fluid, new Without BMW Integ-
ral ABS
With BMW Integral
ABS
Wheel circuit
Control circuit
Date, stamp, signature
BMW Service
BMW Annual In-
spection
BMW Service
BMW Inspection
Carried out in accord-
ance with manufacturer's
instructions
Odometer reading
Brake fluid, new Without BMW Integ-
ral ABS
With BMW Integral
ABS
Wheel circuit
Control circuit
Date, stamp, signature
10150zService