2005 BMW 745i oil change

Downloaded from www.Manualslib.com manuals search engine SubjectPage
Components
Cooling System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
- Coolant Circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
- Water Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
- Map-Controlled Thermostat. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
- Cooling Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
- Radiator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
- Expansion Tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
- Transmission Oil/Water Heat Exchanger . . . . . . . . . . . . . . . . . . . . . . . . .44
- Electrically-Operated Fan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
- Viscous Coupling Fan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Engine block . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
- Oil Sump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
- Crankcase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
- Crankshaft . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46
- Connecting Rods and Pistons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
- Flywheel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
- Vibration Damper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Lubrication System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
- Oil Jets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
- Oil Check Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
- Oil Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
- Oil Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
- Pressure Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
- Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Review Questions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Downloaded from www.Manualslib.com manuals search engine 32
N62 Engine
H Hy
yd
dr
ra
au
ul
li
ic
c
A
Ac
ct
tu
ua
at
ti
io
on
n:
:
When oil pressure is applied to chamber A, the blades are forced away from the VANOS
housing (counterclockwise). The blades are keyed into the hub which results in the hub
position being rotated in relation to the housing (with sprocket). The hub is secured to the
camshaft which changes the camshaft to sprocket relationship (timing).
The example below shows the a ad
dj
ju
us
st
tm
me
en
nt
t
procedure together with the pressure progres-
sion based on the VANOS unit for the exhaust camshafts.
During this adjustment chamber B is open (through the solenoid) to allow the oil to drain
back through the cylinder head (internal reservoir).
Hydraulic Actuation - Chamber A
1. Front View of Vanos Unit 5. Engine Oil Pump
2. Side View of Vanos Unit 6. Supplied Oil from Pump (Switched Through Solenoid)
3. Camshaft Oil Port (Chamber B) 7. Supplied Oil Pressure (From Engine Oil Pump)
4. Solenoid Valve43-02-45

Downloaded from www.Manualslib.com manuals search engine 38
N62 Engine
Cooling System
Coolant Circuit - 14 Liter Coolant Capacity
42-02-56
Cooling System (Circuit Flow)
1. Cylinder Head Bank 5-8 12. Radiator
2. Coolant Supply (heater core) 13. Radiator Partition (low temp section)
3. Water valve with electric water pump 14. Temperature Sensor
4. Cylinder Head Gasket 15. Water Pump
5. Coolant Supply Line 16. Radiator Return Flow
6. Cylinder Head Ventilation Lines 17. Radiator Ventilation Line
7. Hole (crankcase venting system) 18. Expansion Tank
8. Transmission oil lines 19. Thermostat
9. Oil/water heater exchanger for automatic transmission 20. Cylinder Head Bank 1-4
10. Thermostat for transmission oil heat exchanger 21. Vehicle Heater
11. Alternator Housing 22. Radiator (High Temperature Area)

Downloaded from www.Manualslib.com manuals search engine 40
N62 Engine
The coolant flows to the rear of the engine block, from there through the side channels to
the cylinder walls and then into the cylinder heads (lower left picture). The cast aluminum
cover at the rear of the engine block (with sealing bead) is shown on the lower right.
Water Pump/Thermostat Housing
The water pump is combined with the thermostat housing and is bolted to the timing case
lower section.
C Ca
au
ut
ti
io
on
n
d
du
ur
ri
in
ng
g
i
in
ns
st
ta
al
ll
la
at
ti
io
on
n
o
of
f
t
th
he
e
w
wa
at
te
er
r
p
pu
um
mp
p:
:
The impeller is made from reinforced plastic.
42-02-59
Water Pump / Thermostat Housing
1. Map-controlled themostat (radiator cool return flow).
2. Electrical connection for Thermostat Heating element.
3. Thermostat Mixing Chamber
4. Temperature Sensor (hot coolant from engine)
5. Radiator in-flow (hot coolant from engine)
6. Heat exchanger (transmission oil return flow)
7. Leakage Chamber (evaporation space)
8. Alternator in-flow (cool supply)
9. Water Pump
10. Expansion Tank Connection

Downloaded from www.Manualslib.com manuals search engine 42
N62 Engine
Map-controlled Thermostat
The map-controlled thermostat allows the engine to be cooled relevant to operating con-
ditions. This reduces fuel consumption by approximately 1-6%. The electrical connections,
the design and the map-controlled thermostat response have been enhanced. The map-
controlled thermostat function is the same as previous engines (M62).
Cooling Module
The cooling module contains the following main cooling system components:
• Cooling radiator
• Air conditioning condenser
• Transmission oil/water heat exchanger
• Hydraulic fluid radiator
• Engine oil radiator
• Main electric fan
• Fan shroud for viscous coupling fan
All the components (with the exception of the transmission oil radiator) can be removed for
repairs without disassembling any other coolant circuit. All connections have been fitted
with the quick-release coupling which are used in current models.
Maped-Controlled Thermostat
1. Radiator Return Flow To Thermostat
2. Connection for Thermostat Heating Element
3. Temperature Sensor
4. Radiator in-flow (hot coolant from engine)

Downloaded from www.Manualslib.com manuals search engine 43
N62 Engine
Cooling Radiator
The radiator is made from aluminum and is divided into a high-temperature section and a
low-temperature section by a partition wall (see coolant circuit diagram). The coolant first
flows into the high-temperature section and then back to the engine, cooled.
Some of the coolant flows through an opening in the radiator partition wall to the low-tem-
perature section where it is cooled further. The coolant then flows from the low-tempera-
ture section (when the ÖWT thermostat is open) into the oil/coolant heat exchanger.
Coolant Expansion Tank
The expansion tank is mounted on the right hand wheel housing (engine compartment).
N No
ot
te
e:
:
The expansion tank should never be filled above the Max marking. Excess coolant is
expelled by the pressure relief valve in the cap as it heats up. Avoid overfilling the expan-
sion tank because the cooling circuit design ensures very good “self bleeding”.
Cooling Components
1. Cooling Radiator 4. Engine oil/air heat exchanger connection
2. Expansion Tank (hot countries only)
3. Water Pump 5. Transmission oil/coolant heat exchanger

Downloaded from www.Manualslib.com manuals search engine 44
N62 Engine
Transmission Oil/Coolant Heat Exchanger
The transmission oil/coolant heat exchanger ensures that the transmission oil is heated up
quickly and also that it is appropriately cooled. When the engine is cold, the transmission
oil/coolant heat exchanger thermostat switches into the engine's recirculated coolant cir-
cuit. This allows the transmission oil to heat up as quickly as possible (with the engine
coolant).
When the return flow water temperature reaches 82 ºC, the thermostat switches the trans-
mission oil/coolant heat exchanger to the low-temperature coolant radiator circuit (refer to
the cooling circuit diagram) to cool the transmission oil.
Electrically Operated Fan
The electric fan is integrated in the cooling module and is mounted directly in front of the
radiator. The speed is regulated by the ECM.
Viscous Coupling Fan
The viscous coupling fan is driven by the water pump. The noise output and the perfor-
mance of the fan coupling and the fan wheel have been optimized as compared with the
E38M62. The viscous coupling fan is used as the final level of cooling and switches on at
an air temperature of 92 ºC.
N No
ot
te
es
s:
:

Downloaded from www.Manualslib.com manuals search engine 52
N62 Engine
Oil Cooling (if equipped)
An oil cooler is used in hot countries. The oil cooler is located in front of the radiator above
the A/C condenser. The engine oil flows from the oil pump through a channel in the
crankcase to a connection on the generator support. The generator support has an oil ther-
mostat. A wax element in the oil thermostat continuously opens the inflow to the oil cooler
when the oil temperature is between 100 ºC to 130 ºC.
Some of the engine oil always flows past the oil thermostat and through the engine with-
out being cooled, even when the oil thermostat is fully open. This ensures a minimum
amount of oil is supplied when the cooler is faulty. A modified generator support, without
connections for the oil thermostat, is fitted to vehicles which do not have an oil cooler.
Technical Data - Lubrication System
The recommended oil is BMW High Performance 5W-30 Synthetic Oil
* P/N 07 51 0 017 866
O Oi
il
l
C
Ca
ap
pa
ac
ci
it
ty
y
i
in
n
L
Li
it
te
er
rs
s









E
Ex
xp
pl
la
an
na
at
ti
io
on
n

8.0 Filling Capacity for Service with Oil Filter Change


O Oi
il
l
P
Pr
re
es
ss
su
ur
re
e






















E
Ex
xp
pl
la
an
na
at
ti
io
on
n


1.0 Minimum Oil Pressure at 20ºC

4.0 - 8.0 Bar Maximum Oil Pressure at 20ºC


O Oi
il
l
D
De
el
li
iv
ve
er
ry
y
C
Ca
ap
pa
ac
ci
it
ty
y









E
Ex
xp
pl
la
an
na
at
ti
io
on
n


9-12 I/Min At Idle Speed (700 rpm) at 20ºC

50-55 I/Min At Maximum Engine Speed (6500 rpm) and 20ºC