2005 BMW 545i Valve cover

Downloaded from www.Manualslib.com manuals search engine Table of Contents
SubjectPage
N62B44 Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Objectives of the Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Purpose of the System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Engine Views . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Components
Fresh Air System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
- Air Routing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
- Throttle Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
- Intake Manifold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
- Crankcase Venting System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Exhaust System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
- Exhaust Manifold with Catalytic Converter . . . . . . . . . . . . . . . . . . . . . . . 13
- Silencers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
- Secondary Air System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Ancillary Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
- Belt Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
- Alternator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
- Air Conditioning Compressor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
- Starter Motor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
- Power Steering Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Cylinder Heads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
- Engine Covers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
- Valve Gear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
- Valvetronic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
- Bi-VANOS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
- Vacuum Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
- Chain Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Downloaded from www.Manualslib.com manuals search engine Crankcase Venting System
The crankcase vapors (a result of combustion blow-by gasses) are led out of the crank-
case and back into the combustion chamber via the intake manifold. The blow-by gasses
contain droplets of oil which must be separated. The oil is returned to the sump while the
blow-by gasses are led into the intake pipe for combustion.
The engine performance is affected by the introduction of crankcase vapors into the com-
bustion process, particularly in idle speed ranges. This influence is monitored by lambda
regulation.
The crankcase vapors are carried from the crankcase and into the cylinder head covers
through labyrinth separators (one per cylinder head). The oil which accumulates on the
walls of the labyrinth separators flows into the cylinder head via a siphon and from there
back to the sump.
The remaining vapors are passed to the engine for combustion via the pressure control
valve (5) in the intake manifold. One labyrinth separator with a pressure control valve is inte-
grated in each of the two cylinder head covers.
The throttle valve is controlled so that there is always a 50 mbar vacuum in the intake man-
ifold. The pressure control valve regulates the crankcase pressure to a low 0-30 mbar.
12
N62 Engine
43-02-12 Cylinder Head Cover
1-4. Opening for Spark Plugs
5. Pressure Control Valve
6. Opening Valvetronic Motor
7. Opening Valvetronic Sensor
Connector
8. Camshaft Sensor

Downloaded from www.Manualslib.com manuals search engine N No
ot
te
e:
:

The alternator regulator voltage is influenced by the ECM - BSD interface. The bat-
tery charge voltage can therefore be up to 15.5 V, depending on the battery temperature.
If a battery charge voltage of up to 15.5 V is measured, the regulator is not faulty. A high
charge voltage indicates a low battery temperature.
Air Conditioning Compressor
The “clutch free” A/C compressor is manufac-
tured by Denso. It functions continuously with
the engine running. The compressor is a 7-
cylinder swash plate type. The displacement
can be reduced to less than 3% when air con-
ditioning is not requested (no refrigerant is sup-
plied to the refrigerant circuit).
There is an internal compressor refrigerant cir-
cuit to maintain lubrication. The IHKA electron-
ics regulate the compressor output via an
external control valve (1).
Starter Motor
The starter motor is located on the right-hand
side of the engine below the exhaust manifold,
and is a compact planetary drive starter with a
1.8 kW output.
1. Starter motor with heat protective cover.
Power Steering Pump
The power steering pump is a tandem radial piston pump on vehicles equipped with
Dynamic Drive. A single vane pump is installed on vehicles without the Dynamic Drive.
Further information about the power steering pump can be found in the Chassis Dynamics
section.
19
N62 Engine
42-02-19
42-02-03

Downloaded from www.Manualslib.com manuals search engine Engine Covers
Each cylinder head has a plastic cover for the ignition coil cabling and top of the cylinder
head. The covers “push fit” into rubber grommets on the cylinder head covers.
A sound absorption cover for the top of the
engine also covers the two Valvetronic motors.
This cover is fixed to the intake manifold hous-
ing using four bolts.
The cylinder head covers are made from plastic. The retaining sleeves for the ignition coils
have molded-on gaskets. The sleeves must be replaced if any hardening or damage is vis-
ible on the gaskets. The sleeves are inserted into the cylinder head through the cylinder
head cover (nos. 1through 4).
N No
ot
te
es
s:
:

21
N62 Engine
42-02-21
Engine Covers
Cylinder Head Cover
1. Cylinder Head Top Cover
2. Sound Absorption Engine Cover
1-4. Opening for Spark Plugs
5. Pressure Control Valve
6. Opening for Valvetronic Motor
7. Opening for Valvetronic Sensor Connector
8. Camshaft Sensors (Intake and Exhaust)
43-02-12

Downloaded from www.Manualslib.com manuals search engine Valvetronic Motors
One Valvetronic motor is located on top of each
cylinder head towards the inside of the engine
“V”. The motors are capable of traveling from
minimum to maximum lift in 300 milli-seconds.
N No
ot
te
e:
:

The Valvetronic motor must first be removed in order to remove the cylinder head
cover. The eccentric shaft must be in the minimum lift position and the motor must be
wound out from the eccentric shaft. The worm gear could otherwise be damaged when
separating the worm shaft and the worm wheel as the eccentric shaft springs back (due to
the torque compensation spring).
I If
f
i
it
t
i
is
s
n
no
ot
t
p
po
os
ss
si
ib
bl
le
e
t
to
o
r
re
em
mo
ov
ve
e
t
th
he
e
m
mo
ot
to
or
r,
,
d
du
ue
e
t
to
o
m
me
ec
ch
ha
an
ni
ic
ca
al
l
f
fa
ai
il
lu
ur
re
e
o
or
r
s
st
ti
ic
ck
ki
in
ng
g,
,
t
th
he
e
w
wo
or
rm
m
s sh
ha
af
ft
t
c
ca
an
n
b
be
e
m
mo
ov
ve
ed
d
u
us
si
in
ng
g
a
an
n
A
Al
ll
le
en
n
k
ke
ey
y
t
to
o
r
re
el
le
ea
as
se
e
t
th
he
e
m
mo
ot
to
or
r.
.
A
A
h
ho
ol
le
e
m
mu
us
st
t
b
be
e
d
dr
ri
il
ll
le
ed
d
i
in
n
t
th
he
e
r re
ea
ar
r
p
pl
la
as
st
ti
ic
c
m
mo
ot
to
or
r
c
co
ov
ve
er
r
i
in
n
o
or
rd
de
er
r
t
to
o
a
ac
cc
ce
es
ss
s
t
th
he
e
m
mo
ot
to
or
r
s
sh
ha
af
ft
t
(
(w
wo
or
rm
m
s
sh
ha
af
ft
t)
)
u
us
si
in
ng
g
t
th
he
e
A
Al
ll
le
en
n
k
ke
ey
y.
.
T Th
he
e
m
mo
ot
to
or
r
c
ca
an
n
t
th
he
en
n
n
no
o
l
lo
on
ng
ge
er
r
b
be
e
u
us
se
ed
d.
.
The Valvetronic motor worm gear rotates the
eccentric shaft clockwise or counterclockwise
at a very quick rate (1).
Due to the progressive “lobe” on the eccentric
shaft, this rotation positions the intermediate
lever (2) closer or further to the camshaft lobe.
N No
ot
te
es
s:
:

26
N62 Engine
1
2
Valvetronic Motor
1. Cylinder Head Cover, Cylinder Bank 1-4
2. Valvetronic Motor for Eccentric Shaft Adjustment
42-02-2943-22-28

Downloaded from www.Manualslib.com manuals search engine 27
N62 Engine
Eccentric Shafts
The eccentric shafts (one per cylinder head) are driven by the
Valvetronic motors and are supported by four caged needle
bearing assemblies for a smooth rotation.
To assist in maintaining the set positions and counter the
valve train torque, a torque compensation spring is mounted
on the end of the shaft for tension.
Magnets are fitted in the (removable) magnetic wheel at the
end of the eccentric shaft. Together with the position sensor,
the Valvetronic Control Module determines the exact shaft
position. The eccentric shaft sensor is mounted through the
cylinder head cover (one per cylinder head) at the back.
The magnetic wheel is secured to the shaft by a bolt and is
indexed by a tab (arrow) to prevent incorrect installation.
Intermediate Lever and Roller Finger
The intermediate lever is positioned further (minimum valve
opening) or closer (maximum valve opening) to the camshaft
by the the progressive “lobe” on the eccentric shaft as it is
rotated. This offers a variable ratio effect for valve actuation.
The roller finger is used to actuate the intake valve.
The intermediate levers and roller fingers are matched (by
classification) to ensure uniform valve lift.
N No
ot
te
e:
:
W
Wh
he
en
n
d
di
is
sa
as
ss
se
em
mb
bl
li
in
ng
g/
/a
as
ss
se
em
mb
bl
li
in
ng
g
t
th
he
e
v
va
al
lv
ve
et
tr
ra
ai
in
n,
,
t
th
he
e
i in
nt
te
er
rm
me
ed
di
ia
at
te
e
l
le
ev
ve
er
rs
s
a
an
nd
d
r
ro
ol
ll
le
er
r
f
fi
in
ng
ge
er
rs
s
m
mu
us
st
t
b
be
e
r
re
et
tu
ur
rn
ne
ed
d
t
to
o
t
th
he
e
o or
ri
ig
gi
in
na
al
l
p
po
os
si
it
ti
io
on
ns
s
t
to
o
p
pr
re
ev
ve
en
nt
t
u
un
ne
ev
ve
en
n
c
cy
yl
li
in
nd
de
er
r
c
ch
ha
ar
rg
gi
in
ng
g
w
wh
hi
ic
ch
h
c ca
an
n
r
re
es
su
ul
lt
t
i
in
n
r
ro
ou
ug
gh
h
i
id
dl
le
e
a
an
nd
d
e
en
ng
gi
in
ne
e
p
pe
er
rf
fo
or
rm
ma
an
nc
ce
e
c
co
om
mp
pl
la
ai
in
nt
ts
s.
.

R Re
ef
fe
er
r
t
to
o
t
th
he
e
R
Re
ep
pa
ai
ir
r
I
In
ns
st
tr
ru
uc
ct
ti
io
on
ns
s
f
fo
or
r
t
to
ol
le
er
ra
an
nc
ce
e
n
nu
um
mb
be
er
rs
s!
!
42-02-3643-02-32
43-02-38
43-02-33

Downloaded from www.Manualslib.com manuals search engine 30
N62 Engine
Camshaft Sensors
The cam shaft sensors (Hall effect) are mounted through the cylinder head cover. There are
two sensors per cylinder head to monitor the intake and exhaust camshaft positions.
The sensors monitor the impulse wheels
attached to the ends of the camshafts.
Solenoid Valves
The VANOS solenoid valves are mounted through the upper timing case front cover. There
are two solenoids per cylinder head to control the oil flow to the camshaft ports for the
intake and exhaust VANOS units.
The 4/3 way proportional solenoid valve is acti-
vated by the ECM to direct oil flow. The sole-
noid valve is sealed to the front cover by a radi-
al seal and secured by a retaining plate.
N No
ot
te
es
s:
:

42-02-48 Camshaft Sensors
1. Valvetronic Position Sensor
2. Intake Camshaft Position Sensor
3. Exhaust Camshaft Position Sensor
42-02-42

Downloaded from www.Manualslib.com manuals search engine 35
N62 Engine
Chain Drive
The camshafts are driven by a toothed chain, one for each cylinder bank. The oil pump is
driven by a separate roller chain.
1. Sensor wheels for the camshaft position sensor, cylinder bank 1-4
2. Tensioner Rail, Cylinder 5-8
3. Chain Tensioner, Cylinder Bank 5-8
4. Sensor Wheel for the camshaft position sensor, cylinder bank 5-8
5. Upper timing chain guide with integrated oil jet
6. Guide rail
7. Sprocket for Oil Pump Drive
8. Timing case lower section
9. Tensioning rail, cylinder bank 1-4
10. Solenoid Valve, VANOS exhaust camshaft
11. Solenoid Valve, VANOS intake camshaft
12. Upper Timing Chain Cover
13. Chain Tensioner, Cylinder Bank 1-4
14. VANOS exhaust camshaft Bank 1-4
15. Upper Timing Chain guide with integrated oil jet
16. VANOS intake camshaft 1-4Chain Drive
43-02-50