2005 Alfa Romeo GT Owner handbook (in English)

TYRE INFLATION PRESSURES COLD
TECHNICAL SPECIFICATIONS
279
PERFORMANCE
1.8 T. SPARK2.0 JTS 2.0JTS 3.2 V6JTD16VSelespeed
Maximum speed in km/h 200 216 216 243 209
With the tyre hot the inflating pressure should be +0,3 bar compared with the specified rating
With winter tyres the inflation pressure should be +0,2 bar compared with the specified rating
Tyres
195/60 R15bar
205/60 R15bar
205/55 R16bar
205/55 ZR16bar
215/45 R17bar
225/45 ZR17bar
225/40 ZR18bar
Compact spare wheel
125/80 R15barreduced load
front rear
2.2 2.2
2.3 2.3
2.3 2.3
2.3 2.3
2.4 2.3
2.5 2.4
2.5 2..4
4.2full load
front rear
2.5 2.5
2.6 2.6
2.6 2.6
2.6 2.6
2.7 2.6
2.8 2.7
2.8 2.7
4.2

TECHNICAL SPECIFICATIONS
280
DIMENSIONS
fig. 5
ABCDE FGH
1.8 T. SPARK 2.0 JTS4489 967 2596 926 1362 1763 1524 1510
3.2V64489 967 2596 926 1355 1763 1524 1510
JTD16V4489 967 2596 926 1366 1763 1524 1510
The sizes are
in mm and
refer to the car fitted with
standard tyres.
Slight changes with
optional tyres.
Height with
unladen vehicle.
LUGGAGE COMPARTMENT
VOLUME
Capacity ................................ 320 dm3
Capacity with rear seat
back rest folded ...................... .. 905 dm3
A0A0653b

TECHNICAL SPECIFICATIONS
281
WEIGHTS
(*) With special equipment (trailer towing device, etc.) the loadless weight increases, thereby reducing the payload, with regard to the maximum permissi-
ble loads.
(**)Loads not to be exceeded. It is the driver’s responsibility to place goods in the boot and/or on the loading surface in accordance with the maximum per-
missible loads.
JTD16V
1320
520
990
980
1885
1300
400
60
3.2V6
1410
520
1040
980
1930
1400
400
60
2.0 JTS
1320
520
980
980
1840
1300
400
60
1.8 T. SPARK
1290
520
980
980
1810
1300
400
60
Kerb weight
(with fuel oil and fluids,
spare wheel, tools
and accessories) kg
Payload (*) including
driver kg
Max permissible
weights (**):
– front axle kg
– rear axle kg
– total kg
Towable weights:
– braked trailer kg
– trailer without brake kg
Maximum load on ball
(braked trailer) kg

TECHNICAL SPECIFICATIONS
282
REFILLING
2.0JTS
Selespeed
63
7
7.2
–
4.4
2.0
0.6
1.2
0.52
2.5
4.2
3.2V6
63
7
7.2
–
5.9
2.0
–
1.2
0.52
2.5
4.2
1.8 T. SPARK
63
7
7.2
4.4
–
2.0
–
1.2
0.52
2.5
4.2
2.0JTS
63
7
7.2
–
4.4
2.0
–
1.2
0.52
2.5
4.2
Fuel tank: litres– including a reserve of litres
Engine cooling
system litres
Oil sump and filter litres
litres
Mechanical transmission/
differential litres
Selespeed transmission litres
Hydraulic power steering litres
Hydraulic brake circuit with
ABS device litres
Windscreen
washer reservoir: litres
– with headlamp washer litresSpecified fuels
and original lubricants
Unleaded Premium petrol with no
less than 95 R.O.N
Mixture of distilled water
andPARAFLU UP at 50%
SELENIA 20 K Alfa Romeo
SELENIA RACING
TUTELA CAR TECHNYX
TUTELA CAR CS SPEED
TUTELA GI/A
TUTELA TOP 4
for Alfa Romeo
Mixture of water and fluid
TUTELA
PROFESSIONAL SC 35

TECHNICAL SPECIFICATIONS
283
JTD16V
63
7
7.2
4.5
2.0
1.2
0.52
2.5
4.2
Fuel tank: litres– including a reserve of litres
Engine cooling
system litres
Oil sump and filter litres
Mechanical transmission/
differential litres
Hydraulic power steering litres
Hydraulic brake circuit with
ABS device litres
Windscreen
washer reservoir: litres
– with headlamp washer litresSpecified fuels
and original lubricants
Diesel fuel for motor vehicles
(Specification EN590)
Mixture of distilled water and
PARAFLU UP at 50%
SELENIA WR
TUTELA CAR TECHNYX
TUTELA GI/A
TUTELA TOP 4
for Alfa Romeo
Mixture of water and fluid
TUTELA PROFESSIONAL SC 35

TECHNICAL SPECIFICATIONS
284
Use Fluid and lubricant specifications Genuine fluids Change
for correct car operation and lubricants intervals
Lubricants for
petrol engines
1.8 T.SPARK
Lubricants for
petrol engines
2.0 JTS - 3.2 V6
Lubricants for
Multijet engines
FLUIDS AND LUBRICANTS
RECOMMENDED PRODUCTS AND THEIR SPECIFICATIONS
Synthetic-based engine oils, grade SAE 10W-40,
FIAT 9.55535-G2qualification
Synthetic-based engine oils, grade SAE 10W-60,
FIAT 9.55535-H3qualification
Synthetic-based engine oils, grade SAE 5W-40,
FIAT 9.55535-M2qualification
Should non-genuine products be used, lubricants with minimum ACEA A3 properties for petrol engines and ACEA B4 for Diesel engines are tolerated; in this
event top engine performance is not guaranteed.
Using low-quality products, not compliant with ACEA A3 and ACEA B4 properties could cause engine damages not covered by warranty.
For very cold temperatures, consult Alfa Romeo Authorized Services for the proper Seleniaproduct to use
SELENIA 20K
ALFA ROMEO
SELENIA RACING
SELENIA WRAs per Service Schedule
As per Service Schedule
As per Service Schedule

TECHNICAL SPECIFICATIONS
285
UseGenuine fluids
and lubricants
TUTELA CAR
TECHNYX
TUTELA GI/A
TUTELA CAR CS SPEED
TUTELA STAR 500
TUTELA TOP 4
for Alfa Romeo
PARAFLU UP
TUTELA
PROFESSIONAL SC 35Applications
Mechanical gearbox
and differential
Power steering
Selespeed gearbox
electric control electro-
hydraulic actuator
CV joints on wheel side
Hydraulic brake and
clutch controls
Cooling circuits
Proportion:
50% water
and 50% Paraflu UP
To be used diluted or
undiluted Fluid and lubricant specifications
for correct car operation
Synthetic-based oil, grade SAE 75W-85,
that passes API GL-4 Plus specifications
Lubricant for hydrostatic transmissions that passes
"ATF DEXRON II" specifications
Special lubricant with "ATF DEXRON III" type additive
Lithium-soap-based grease with molybdenum bisulphate, NLGI 2 consistency
Synthetic fluid, F.M.V.S.S. n. 116, DOT 4, ISO 4925, SAE J-1704,
CUNA NC 956-01
Protective with antifreeze action, red colour, based
on inhibited monoethylen glycol and organic formula,
that passes CUNA NC 956-16, ASTM D 3306 specifications
Mixture of alcohol, water and surfactants CUNA NC 956-11
IMPORTANTDo not top-up or mix with products having different properties
Lubricants and greases
for transmissions
Brake fluid
Protective agent for radiators
Windscreen and
rear window washer fluid

TECHNICAL SPECIFICATIONS
286
FUEL CONSUMPTION
The fuel consumption figures given in the
table below are determined on the basis of
the homologation tests set down by specif-
ic European directives.
The procedures below are followed for
measuring consumption:
–urban cycle: cold starting followed by
driving that simulates urban use of the car;IMPORTANT The type of route,
traffic situations, weather condi-
tions, driving style, general condi-
tions of the vehicle, trim
level/equipment/accessories, load,
presence of a roof rack, use of the
climate control system, other situ-
ations that affect air drag may lead
to different fuel consumption levels
than those measured (see “Reduc-
ing running costs and environment
pollution” in the chapter “Correct
use of the car”).
3.2V6
18.6
8.7
12.4JTD
16V
8.7
4.8
6.2 2.0 JTS
12.2
6.7
8.7
1.8 T. SPARK
12.1
6.4
8.52.0 JTS
Selespeed
12.2
6.7
8.7
–extraurban cycle: frequent acceler-
ating in all gears, simulating extraurban use
of the vehicle; the speed varies between 0
and 120 km/h;
–Combined consumption: is calcu-
lated weighing about 37% of urban cycle
consumption and about 63% of extraurban
consumption.
Fuel consumption according
to directive 1999/100/EC
(litres x 100 km)
Urban
Extraurban
Combined