2005 Alfa Romeo GT ECO mode

GETTING TO KNOW YOUR CAR
166
After each change of the sound source, for
about 2.5 seconds, the display shows the
function selected: TUNER(Radio),CD
(Compact Disc), CHANGER(CD-Chang-
er).
The functions that cannot be selected (e.g.
“CD” when the Compact Disc is not insert-
ed) are disabled automatically. If the Com-
pact Disc is not inserted and the CD-Chang-
er is not connected, pressing the “SRC” but-
ton (14) for about 2.5 seconds, the display
will show only “NO CD”.
IMPORTANTWhen listening to the ra-
dio with a Compact Disc inserted and the
CD-Changer connected, pressing the “SRC”
button (14) will select the last function used
between Compact Disc and CD-Changer.
Pause function
If, while listening to a Compact Disc, an-
other function is selected (e.g. the radio),
playing is stopped and when the Compact
Disc mode is resumed, it starts again from
the point in which it was stopped.
If, while listening to the radio, another
function is selected, when the Radio mode
is resumed, it is tuned to the last station
selected.Volume adjustment
Press button “VOL+” (21) to higher the
volume or “VOL-” (19) to lower it.
Pressing the button briefly the change is
gradual by steps. Pressing longer, the
change is fast. For a few seconds the dis-
play shows the wording “VOL” and the vol-
ume level (from 0 to 66).
If the volume level is changed during the
broadcast of a traffic bulletin or during use
of the phone (if the voice feature is in-
stalled), the new setting is maintained on-
ly until the end of the bulletin or phone call.
Volume changing with speed
(excluding versions with HI-FI
BOSE sound system)
The SVC function makes it possible to au-
tomatically adapt the volume level to the
speed of the car, increasing it as the speed
increases to maintain the ratio with the noise
level inside the passenger compartment.
To activate the SVC function, briefly press
(less than 1 second) the “MENU” button
(9), then use buttons “
▲” (6) or “▼” (8)
to scroll the menu functions stopping on the
SVC function and buttons “
˙˙” (7) or
“
¯¯” (4) to turn the function on or off se-
lecting respectively “SVC ON” or “SVC
OFF”.This function can be turned on or off in all
the operating modes of the device (Ra-
dio/Compact Disc/CD-Changer).
Mute function
(turning off the volume
completely)
To turn on the Mute function, briefly press
(less than 1 second) the “
z” button (20).
The volume will lower gradually (Soft Mute)
and the display will show “MUTE”.
To turn the Mute function off, briefly press
the “
z” button again (20). The volume
will increase gradually (Soft Mute) return-
ing to the value set before using the Mute
function.
The Mute function is also turned off press-
ing one of the volume adjustment buttons
“VOL+” (21) or “VOL-” (19): in this
case the volume is changed directly.
With the Mute function on, all the other
functions can be used and if a traffic bul-
letin arrives with the TA function on or an
emergency alarm is received, the message
ignores the Mute function.

GETTING TO KNOW YOUR CAR
169
Presetting buttons
The buttons with the symbols 1 to 6
(“17”, “16”, “15”, “12”, “11”,
“10”) make it possible to choose the fol-
lowing presettings:
– 18 in the FM band (6 in FM1, 6 in
FM2, 6 in FMT)
– 6 in the MW band
– 6 in the LW band
– 6 types of PTY programming (only in
the FM mode when PTY is selected).
To call a preset station, choose the required
frequency band and then press briefly (less
than 1 second) the corresponding preset but-
ton (from 1 to 6). For a few seconds the
display will show the number of the station
preset and the related frequency before
showing the frequency band and the name
of the RDS station.
Storing the last station heard
The radio automatically keeps in storage
the last station heard for each reception
band, which is tuned when the radio is
turned on or the reception band is changed.Automatic tuning
Briefly press (less than 1 second) “
▲”
(6) or “
▼” (8) to start automatically
searching the tuning for the next station that
it is possible to receive in the direction cho-
sen.
If “
▲” (6) or “▼” (8) is pressed for
longer (over 1 second) quick searching
takes place: upon having tuned into the first
well receivable station, the tuner stops for
about 1 second (in Mute) before quick
searching continues. When the button is re-
leased, the tuner stops on the next receiv-
able station.
If the TA function is on (traffic information),
the tuner only searches stations which broad-
cast traffic bulletins.
If the PTY function is on, the tuner only
searches PTY stations. When searching the
display alternatively shows the type of pro-
gramme and the word “SEARCH”.
If the station on which the tuner stops is
one of the stations stored with the preset
buttons, the display will show the presetting
number for a few seconds.Manual tuning
This allows manual station searching in the
chosen band.
– Select the band with the “BN” button
(13): FM1, FM2, FMT, MW or LW.
– Briefly and repeatedly press “¯¯” (4)
or “
˙˙” (7).
– Pressing the button longer (over 1 sec-
ond) obtains fast forward searching, which
is stopped when the button is released.
To turn on manual tuning search it is nec-
essary to turn off the PTY and AF (alterna-
tive frequencies) functions, if on.
If the station tuned is a station stored with
the preset buttons, the display will show the
presetting number for a few seconds.

GETTING TO KNOW YOUR CAR
172
The behaviour of the set during Autostore
is as follows:
– at the beginning of the Autostore func-
tion all the other functions are disabled
– any change in volume is not shown on
the display
– pressing one of the radio function but-
tons, for example “PTY” (2), “
˙˙” (7),
“
¯¯” (4), (17), (16), (15), (12),
(11), (10) the automatic storage process
is interrupted, the last station heard before
Autostore was turned on is tuned and the
function associated with the button pressed
is run
– pressing “AF-TA” (1) during auto-
matic storage will interrupt it, the TA func-
tion (traffic information) will be turned
on/off and a new automatic storage process
will be started
– changing the sound source (Radio, Com-
pact Disc, CD-Changer) during automatic
storage, Autostore is not interrupted.
IMPORTANTSometimes the Autostore
function is unable to find 6 stations with a
strong signal. In this case, the free presetting
buttons will be shown on the display, for
about 2 seconds, by 4 dashes and the last
station heard will be returned.Listening to stored stations
Proceed as follows:
– select the required frequency band (FM,
MW, LW)
– briefly press one of the six station stor-
age buttons.
The display will show the number that cor-
responds to the button.
In bands FM1, FM2 and FMT, if reception
is poor and the AF alternative frequency
search function is active, the station with the
strongest signal that is broadcasting the
same programme will be sought automati-
cally. AF function (alternative
frequency search)
Within the RDS system the radio can work
in two different modes:
AF ON: alternative frequency search on
AF OFF: alternative frequency search off.
When the signal of the RDS station tuned
weakens, the following two cases may oc-
cur:
– With AF ONthe RDS system activates
automatic tuning of the optimum frequency
of the station chosen, with the stations en-
abled, therefore the radio is automatically
tuned to the station with the strongest sig-
nal that is broadcasting the same pro-
gramme. During the journey it will thus be
possible to continue listening to the station
chosen without having to change the fre-
quency when changing area. Of course, the
station being listened to must be receivable
in the area the car is crossing.
– With AF OFFthe radio will not tune
the strongest station automatically and it
will have to be found manually using the
tuner buttons.

GETTING TO KNOW YOUR CAR
175
Emergency alarm reception
In the RDS mode the radio is set to receive
emergency announcements in the case of
exceptional circumstances or events that
may cause general danger (earthquakes,
floods, etc.) if they are broadcast by the sta-
tion tuned.
This function is activated automatically and
cannot be deactivated.
Program Type Function (PTY)
(selecting a type
of programme)
To turn on the PTY function, which makes
it possible to give top priority to PTY pro-
grammes, when present, which may involve
emergency messages or various topics (e.g.
music, news bulletins) briefly press the
“PTY” button (2) until the display shows
“PTY” and the subject of the last station
heard (e.g. “NEWS”).
IMPORTANTTo turn on the PTY func-
tion, the radio must be in the FM band.
If the station does not broadcast in the PTY
mode, the wording “NO-PTY” is shown
on the display for 5 seconds.
After 2 seconds the station name or fre-
quency is shown on the display.The list of the various subjects comprises:
NEWS
AFFAIRS
INFO
SPORT
EDUCATE
DRAMA
CULTURE
SCIENCE
VARIED
POP M
ROCK M
M,O,R,MMiddle of the Road Music
LIGHT M
CLASSICS
OTHER M
To change the type of PTY programme
press “
¯¯” (4) or “˙˙” (7) or one of
the 6 preset buttons. If the display shows
the station frequency or name, pressing
“
¯¯” (4) or “˙˙” (7) the current type
of programme will be displayed.To store the current type of programme on
one of the 6 preset buttons, give a pro-
longed press (over 1 second) on the pre-
set button. Storage is confirmed by a
“beep”. To seek a station with this pro-
gramme see the “Automatic tuning” and
“Scanning stations (Scan function)” para-
graphs.
If no station is available with this type of
programme the system sounds a “beep”,
the station selected previously is heard and
for 2 seconds the display shows the word-
ing “NO-PTY”.
To turn the PTY function off briefly press
the “PTY” (2) button again.

GETTING TO KNOW YOUR CAR
180
Regional broadcast reception
function (REG)
Some national broadcasters, at determi-
nate times of the day, transmit regional pro-
grammes which differ from region to region.
This function makes it possible to tune in on-
ly local stations (regional). However if a
regional programme is heard and you wish
to stay tuned to it, the function must be ac-
tivated.
To turn the function on/off, use “
˙˙”
(7) or “
¯¯” (4).
The display will show the current status
of the function:
– “REG-ON”: function on
– “REG-OFF”: function off.
If the function is off and a regional pro-
gramme is tuned that works in a determi-
nate area and the car enters a different area,
the regional station of the new area is re-
ceived.
IMPORTANTWhen the function is off
(“REG-OFF”) and the AF function is on
(alternative frequencies) the radio auto-
matically tunes to the frequency of the se-
lection selected with the strongest signal.
COMPACT DISC PLAYER
(fig. 154)
Selecting the
Compact Disc player
To turn on the Compact Disc player inte-
grated in the set, when a CD is already in-
serted, turn the set on, then briefly and re-
peatedly press the “SRC” button (14) to
select the “CD” operating mode. Inserting
a CD, also with the device off, the CD play-
er is turned on.
Inserting/ejecting a CD
To insert the CD set it gently in place (3)
to activate the powered loading system,
which will position it correctly.
Press “
˚” (5), with the device on, to op-
erate the powered CD eject system.
After ejection, the source heard before play-
ing the CD will return. The CD cannot be
ejected if the device is off.Possible error messages
If the CD inserted is illegible, the display
will show the wording “CD-ERROR”, for
about 2 seconds, then the CD is ejected and
the previous source before the CD was se-
lected returns.
Display information
When the CD player is working, the dis-
play shows information which has the fol-
lowing meaning:
“T05”: shows the number of the track on
the CD
“03:42”: shows the time elapsed since
the start of the track (if the corresponding
Menu function is on)
“MADONNA”: shows the name given
to the CD.
Select track (forward/backward)
Briefly press “
▲” (6) to play the next
track on the CD and “
▼” (8) to play the
previous one.

GETTING TO KNOW YOUR CAR
186
COMPACT DISC MP3
PLAYER
INTRODUCTION
This chapter describes only the operation
of the MP3 player. For the operation of Ra-
dio, Compact Disc and CD Changer refer to
the chapter “Radio with Compact Disc play-
er”.
NOTE: MPEG Layer-3 audio decoding tech-
nology licensed from Fraunhofer IIS
and Thomson multimedia.
MP3 MODE
Besides playing normal audio CDs, the ra-
dio can also play CD-ROM with MP3 com-
pressed audio files. When a common au-
dio CD is inserted, the radio works as de-
scribed previously (“Radio with Compact
Disc player”) .
To ensure optimal playing you are recom-
mended to use good quality CDs a the low-
est speed possible.The structure of a CD MP3 is the follow-
ing:
– there is a main folder with/without
MP3 tracks;
– below this folder there are other folders
with/without “subfolders” and/or MP3
tracks;
– inside the “subfolders” there may be
further “subfolders” and/or MP3 tracks;
Each CD MP3 folder is counted as illus-
trated in the diagram (see example on the
following page).

GETTING TO KNOW YOUR CAR
189
Selection of following/previous
folder
Press button 6 (
N) to select a subsequent
folder or button 8 (
O) to select a previous
folder. The name of the new folder selected
will be shown on the display.
The folder selection occurs cyclically: af-
ter the last folder, the first is selected and
vice versa.
IMPORTANTIt is possible to select on-
ly the folders containing at least one track.
If no other folder/track is selected in the
next 2 seconds, the first track in the new
folder will be played.
If the last track in the current folder is be-
ing played, the next folder selected will be
the one with at least one track.Display information
When a CD MP3 is inserted, “MP3” is
shown on the display together with the in-
dications having the following meaning:
– “T05”: indicates the number of the
track in the CD MP3;
– “BEST OF”: indicates the name assigned
to the folder (if the corresponding menu
function is on);
– “XXXXX”: indicates the track name (if
the corresponding menu function is on);
– “03:42”: indicates the time elapsed
since the track has started (if the corre-
sponding menu function is on);
– “BEST 01”: indicates the name as-
signed to the CD MP3 (if the correspond-
ing menu function is on).
If the CD Name mode has been selected
and no CD name has been memorised, the
display will show the track time.Select track (forward/backward)
Briefly press button 4(
¯¯) to select the
previous track or press button 7(
˙˙) to
select the following track. The track selec-
tion occurs cyclically: after the last track, the
first is selected and vice versa.
If no other folder/track is selected in the
next 2 seconds, the following track will be
played.
If the track has been playing for over 3 sec-
onds, briefly pressing button 4(
¯¯) the
track is played again from the start. In this
case if wanting to play the previous track,
press the button twice consecutively.

GETTING TO KNOW YOUR CAR
190
Fast forward/backward
Keep button 7(
˙˙) pressed to move the
track selected forward at high speed and
keep button 4(
¯¯) pressed to move it
quickly backward. Fast forward/backward
is interrupted once the button is released.
If the the folder data, CD name or track
name function has been chosen in the
menu, this will be replaced by the CD time
display for about 2 seconds.
Scan function
(scanning pieces on the CD MP3)
With this function it is possible to hear the
start of all the tracks contained on a CD.
Keep the 14(SRC-SC) button pressed
until a sound is heard and the start of each
track on the CD is played for 10 seconds.
When the track is playing the display will al-
ternatively show, for 2 seconds, the CD func-
tion chosen (CD time, name or number) and
the wording “SCAN”. If the Scan function is
on, Repeat and Mix are turned off.The scanning sequence is the following:
– from the track played up to the last one
in the folder;
– change of folder and scanning of the
tracks present from the beginning to the end
(and so on for all the folders on the CD un-
til the function is interrupted).
The Scan function is interrupted in the fol-
lowing cases:
– pressing again button 14(SRC-SC)
to continue listening to the track that was
being played;
– pressing 6 (N) or (O) (in CD MP3
mode, the previous/next folder will be cho-
sen);
– pressing a preset button (from 1 to 6);
– turning the Mute function on;
– changing the sound source;
– pressing button 1 14(SRC-SC),9
(MENU-PS) or 18(AUD-LD);
– if the TA function is on and the station
selected is broadcasting a traffic bulletin.
The Scan function continues working un-
til it is interrupted by the user.Repeat function
Press button 12(4-RPT) to listen re-
peatedly to the last track played: for about
2 seconds the display will show “REPEAT
TR”.
Press button 12(4-RPT) again to listen
repeatedly to the MP3 tracks contained in
a folder: for about 2 seconds the display will
show “REPEAT DIR”.
Press again button 12(4-RPT) to turn
off the Repeat function: for about 2 seconds
the display will show “REPEAT OFF”.
After playing the track, for about 2 seconds
the display shows “REPEAT TRACK” or “RE-
PEAT DIRECTORY”.
Changing the sound source, the function
is turned off.
IMPORTANTWhen the Repeat function
is turned on, the Scan and Mix functions are
turned off.