2005 Alfa Romeo 159 lock

199
SAFETY
DEVICES
WARNING
LIGHTS AND
MESSAGES
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
CORRECT USE
OF THE CAR
DASHBOARD
AND
CONTROLS
IN AN
EMERGENCY
Direction indicators/
Taillights/Brake lights
To replace the bulbs proceed as follows:
❒open the tailgate;
❒loosen screw A-fig. 37and remove
the protection cover B;
❒remove the bulb holder unit C-
fig. 38by pressing the retaining
tabsD.
A0E0170mfig. 37
Taillight bulb on tailgate
To replace the bulbs proceed as follows:
❒open the tailgate;
❒turn deviceA-fig. 33 to open lid
B;
❒lower the lid and remove the bulb
holder unit by pressing the retaining
tabsC-fig. 34;
A0E0229mfig. 36
❒remove and replace the burnt-out
bulb by pressing it slightly and turn-
ing it counterclockwisefig. 36:
D: taillight bulb on right/left headlight
❒refit the bulb holder unit securing it
properly using the retaining tabs C-
fig. 34;
❒close lidB-fig. 33.
A0E0040mfig. 38

200
SAFETY
DEVICES
WARNING
LIGHTS AND
MESSAGES
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
CORRECT USE
OF THE CAR
DASHBOARD
AND
CONTROLS
IN AN
EMERGENCY
Additional brake light
(third stop)
Contact Alfa Romeo Authorized Services
to have the third brake light replaced. ❒remove and replace the burnt-out
bulb by pressing it slightly and turn-
ing it counter-clockwisefig. 39:
Etaillight/brake light bulb;
Fdirection indicator bulb.
❒refit the bulb holder unit securing it
properly using the retaining tabs D-
fig. 38;
❒refit the protection cover B-fig. 37
and tighten screw A.Number plate light
To replace the bulbs proceed as follows:
❒operate with a flat blade screwdriver pro-
tected by a soft cloth on device A-fig.
40to remove the light unit B;
❒remove the bulb holderC-fig. 41by
turning it slightly and replace the snap-
fitted bulb D.
A0E0041mfig. 39A0E0168mfig. 40A0E0169mfig. 41

201
SAFETY
DEVICES
WARNING
LIGHTS AND
MESSAGES
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
CORRECT USE
OF THE CAR
DASHBOARD
AND
CONTROLS
IN AN
EMERGENCY
IF AN INTERIOR
LIGHT BURNS OUT
For the type of bulb and power rating,
see “When needing to change a bulb”.
FRONT CEILING LIGHT
Contact Alfa Romeo Authorized Services
to change the bulb.
❒turn the 2 bulb holders A-fig. 45
counter-clockwise, remove and re-
place bulbs.
A0E0183mfig. 44A0E0084mfig. 45
REAR CEILING LIGHT
Versions without sunroof
To change the bulb, proceed as follows:
❒remove the front ceiling light work-
ing in the points shown by the arrows
(seefig. 44);

203
SAFETY
DEVICES
WARNING
LIGHTS AND
MESSAGES
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
CORRECT USE
OF THE CAR
DASHBOARD
AND
CONTROLS
IN AN
EMERGENCY
❒close protection B-fig. 51on light
unitA-fig. 50;
❒refit the light unit inserting first one
side and then the other one until
hearing the locking click.
GLOVEBOX LIGHT
To change the bulb, proceed as follows:
❒open the glovebox;
❒remove the light unit A-fig. 50lev-
ering in the point shown by the ar-
row;
❒raise protectionB-fig. 51and re-
place the snap-fitted bulb;
A0E0172mfig. 50A0E0173mfig. 51
❒replace the bulb C-fig. 49releas-
ing it from the side contacts making
sure that the new bulb is correctly
clamped between the contacts.
A0E0171mfig. 49

204
SAFETY
DEVICES
WARNING
LIGHTS AND
MESSAGES
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
CORRECT USE
OF THE CAR
DASHBOARD
AND
CONTROLS
IN AN
EMERGENCY
BOOT LIGHT
To change the bulb, proceed as follows:
❒open the tailgate;
❒remove the light unit A-fig. 52lev-
ering in the point shown by the ar-
row;
❒open the protection cover B-fig. 53
and replace the bulb releasing it from
the side contacts making sure that
the new bulb is correctly clamped be-
tween the contacts;
❒re-close the protective cover B;
❒refit the light unit inserting first one
side and then the other one until
hearing the locking click.
❒close protection B-fig. 55on light
unitA-fig. 54;
❒refit the light unit inserting first one
side and then the other one until
hearing the locking click.
A0E0205mfig. 52A0E0075mfig. 54A0E0204mfig. 53
PUDDLE LIGHT
To change the bulb, proceed as follows:
❒open the door and remove lens A-
fig. 54levering in the point shown
by the arrow;
❒raise protectionB-fig. 55and re-
place the snap-fitted bulb;
A0E0235mfig. 55

211
SAFETY
DEVICES
WARNING
LIGHTS AND
MESSAGES
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
CORRECT USE
OF THE CAR
DASHBOARD
AND
CONTROLS
IN AN
EMERGENCY
USERS FUSE AMPERE FIGURE
Climate control system fan F02 (MAXI-FUSE) 40 62
Electric steering lock F03 (MAXI-FUSE) 20 62
Brake branch point (pump) F04 (MAXI-FUSE) 40 62
Brake branch point (solenoid valve) F05 (MAXI-FUSE) 40 62
Radiator fan (low speed) F06 (MAXI-FUSE) 40 62
Radiator fan (high speed) F07 (MAXI-FUSE) 50 62
Headlight washer F09 20 62
Horns F10 15 62
Electronic injection sundry secondary services F11 15 62
+ INT for electronic injection system F16 7.5 62
Electronic injection primary services F17 10 62
Engine control branch point F18 15 62
Climate control system compressor F19 7.5 62
Rear window heating F20 20 62
Fuel pump supply F21 20 62
Ignition coils/injectors (petrol versions) F22 15 62
Electronic injection primary services diesel versions) F22 20 62
Sound system/radionavigation system power F23 15 62
Body Computer branch point/Headlight washer relay coil F31 7.5 58
Driver’s door branch point/passenger’s door branch point/
ignition device F32 15 58
Rear left power window F33 20 58
Rear right power window F34 20 58

212
SAFETY
DEVICES
WARNING
LIGHTS AND
MESSAGES
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
CORRECT USE
OF THE CAR
DASHBOARD
AND
CONTROLS
IN AN
EMERGENCY
USERS FUSE AMPERE FIGURE
Water in diesel fuel filter sensor/flow meter F35 7.5 58
Brake light switch/central console control panel F35 7.5 58
Cruise Control F35 7.5 58
AQS sensor F35 7.5 58
Boot branch point/front door branch point power F36 20 58
Instrument panel branch point F37 10 58
Front headlight control unit/Power to control unit for gas-discharge
headights (Bixenon) (where provided) F37 10 58
Boot locking/unlocking gearmotor F38 15 58
EOBD system diagnostic socket F39 10 58
T.P.M.S. control unit F39 10 58
Mobile phone presetting F39 10 58
Alarm system control unit (where provided) F39 10 58
Climate control system F39 10 58
Heated rear window F40 30 58
Windscreen washer/rear window washer nozzle demister F41 7.5 58
Heated mirror demister F41 7.5 58
Brake branch point power (ABS/VDC) –
Steering angle branch point – Yawing sensor F42 7.5 58
Windscreen wiper/washer F43 30 58

218
SAFETY
DEVICES
WARNING
LIGHTS AND
MESSAGES
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
CORRECT USE
OF THE CAR
DASHBOARD
AND
CONTROLS
IN AN
EMERGENCY
Do not start the engine
when towing the car.
WARNING
Before fitting the hook,
clean accurately its
threaded seat. Before starting
to tow, make sure to have
tighten the hook.
WARNING
Before starting to tow,
disengage the steering
lock (see paragraph “Ignition de-
vice” in section “Dashboard and
controls”). When towing, re-
member that without the help of
the brake booster and power
steering, a greater effort is re-
quired on the pedal and steer-
ing wheel. Do not use flexible ca-
bles for towing and avoid jerks.
During towing operations make
sure that fastening the joint to
the car does not damage the
components in contact with it.
When towing the car, you must
comply with the specific traffic
regulations regarding the tow
ring and how to tow on the road.
WARNING