6-13
6-13NOTE:
A diagnostic tachometer must be used for this
procedure.
Standard idle speed:
1,300 ~ 1,500 r/minNOTE:
If the specified idle speed cannot be obtained by performing
the above adjustment, consult a Yamaha dealer.
"
Idle speed adjustment
1. Attach the tachometer. Start the engine and warm it up
for a few minutes (normally, 1 or 2 minutes) at
approximately 1,000 to 2,000 r/min. Occasionally rev
the engine to 4,000 to 5,000 r/min. The engine is warm
when it quickly responds to the throttle.
2. Set the idle to the specified engine speed by adjusting
the throttle stop screw; turn the screw in to increase
engine speed and out to decrease engine speed.
NOTE:
A diagnostic tachometer must be used for this
procedure.
Standard idle speed:
1,300 ~ 1,500 r/minNOTE:
If the specified idle speed cannot be obtained by performing
the above adjustment, consult a Yamaha dealer.
"
Idle speed adjustment
1. Attach the tachometer. Start the engine and warm it up
for a few minutes (normally, 1 or 2 minutes) at
approximately 1,000 to 2,000 r/min. Occasionally rev
the engine to 4,000 to 5,000 r/min. The engine is warm
when it quickly responds to the throttle.
2. Set the idle to the specified engine speed by adjusting
the throttle stop screw; turn the screw in to increase
engine speed and out to decrease engine speed.
