Page 30 of 104
3
INSTRUMENT AND CONTROL FUNCTIONS
1
ZAUM0412
To lock the storage compartment
Insert the key in the lock and turn it 1/4
turn counterclockwise, and then
remove the key.
EWA00005
•Do not exceed the load limit of 1
kg for the storage compartment.
•Do not exceed the maximum
load of 202 kg for the vehicle.
WARNING
1. Rear storage compartment
EWA00034
Do not store heavy items in this
compartment.
WARNING
1
ZAUM0413
1. Front storage compartment B
EAUM0061*
Rear storage compartment
There is a storage compartment under
the seat. (See page 3-12 for seat
opening and closing procedures.)
EWA00005
•Do not exceed the load limit of 5
kg for the storage compartment.
•Do not exceed the maximum
load of 202 kg for the vehicle.
WARNING
3-13
EAUM0101*
Front storage compartment B
To open the storage compartment
Push on the "
" mark of the storage
compartment lid.
To close the storage compartment
Push the lid into the original position.
Page 34 of 104
3
INSTRUMENT AND CONTROL FUNCTIONS
The sidestand switch may be defective.
The scooter should not be ridden until
checked by a Yamaha dealer.
YES NO
With the engine turned off:
1. Move the sidestand down.
2. Make sure that the engine stop switch is set to .
3. Turn the key to .
4. Keep the front or rear brake applied.
5. Push the start switch.
Does the engine start?
The brake switch may be defective.
The scooter should not be ridden until
checked by a Yamaha dealer.
With the engine still off:
6. Move the sidestand up.
7. Keep the front or rear brake applied.
8. Push the start switch.
Does the engine start?
With the engine still running:
9. Move the sidestand down.
Does the engine stall?
The sidestand switch may be defective.
The scooter should not be ridden until
checked by a Yamaha dealer.
NOTE:
This check is most reliable if performed with
a warmed-up engine.
YES NO
The system is OK. The scooter can be ridden.
YES NO
3-17
Page 35 of 104
INSTRUMENT AND CONTROL FUNCTIONS
3
1. Auxiliary DC jack
EAUM0102*
Auxiliary DC jack
This scooter is equipped with an
auxiliary DC jack in the storage
compartment A.
12-V accessories connected to the
auxiliary jack can be used when the key
is in the "
" position and should only
be used when the engine is running.
EC000028*
The accessories connected to the
auxiliary DC jack should not be used
with the engine turned off, and their
combined load must never exceed
2.5 A or 30 W, otherwise the battery
may discharge.
To use the auxiliary DC jack
1. Turn the key to "
".
2. Remove the dust cap from the
receptacle.
3. Insert the accessory plug into the
receptacle.
4. Turn the key to "
", and then start
the engine. (See page 5-1 for
details.)
5. When the accessory jack is not
being used, make sure that the
dust cap is installed onto the
receptacle for protection.
CAUTION:
12V
1
ZAUM0417
3-18
Page 42 of 104

OPERATION AND IMPORTANT RIDING POINTS
5
EAU01118
EW000129
•Become thoroughly familiar
with all operating controls and
their functions before riding.
Consult a Yamaha dealer
regarding any control or
function that you do not
thoroughly understand.
•Never start the engine or
operate it in a closed area for
any length of time. Exhaust fu-
mes are poisonous, and
inhaling them can cause loss of
consciousness and death
within a short time. Always
make sure that there is
adequate ventilation.
•For safety, always start the
engine with the centerstand
down.
WARNING
EAU03843
Starting the engine
See page 5-4 for engine break-in ins-
tructions prior to operating the
vehicle for the first time.
In order for the ignition circuit cut-off
system to enable starting, the sidestand
must be up.
EW000054
•Before starting the engine,
check the function of the igni-
tion circuit cut-off system
according to the procedure
described on page 3-16.
•Never ride with the sidestand
down.1. Turn the key to "
" and make
sure that the engine stop switch
is set to "
".
2. Close the throttle completely.
3. Start the engine by pushing the
start switch while applying the
front or rear brake.
CAUTION:
WARNING
1234
ZAUM0418
1. Rear brake lever
2. Engine stop switch
3. Start switch
4. Front brake lever
5-1
Page 46 of 104
OPERATION AND IMPORTANT RIDING POINTS
5
EAU00461
Parking
When parking, stop the engine, and
then remove the key from the main
switch.
EW000058
•Since the engine and exhaust
system can become very hot,
park in a place where
pedestrians or children are not
likely to touch them.
•Do not park on a slope or on
soft ground, otherwise the
scooter may overturn.
EC000062
Never park in an area where there
are fire hazards such as grass or
other flammable materials.
WARNING
CAUTION:
5-5
Page 78 of 104

PERIODIC MAINTENANCE AND MINOR REPAIR
6
1. Backup fuse
2. Headlight fuse
3. Radiator fan fuse
4. Signaling system fuse
5. Ignition fuse
6. Auxiliary DC jack fuse
7. Spare fuse (x2)
8. Fuse tongs
CAUTION:
6-31
12345 776
8
ZAUM0460
The fuse block, which contains the fu-
ses for the individual circuits, is located
in the storage compartment A. (See
page 3-12 for storage compartment
opening and closing procedures.)If a fuse is blown, replace it as follows.
1. Turn the key to "
" and turn off
the electrical circuit in question.
2. Remove the blown fuse, and then
install a new fuse of the specified
amperage.
Specified fuses:
Main fuse Box
Main fuse: 30 A
Fuse block
Backup fuse 3 A
Headlight fuse: 15 A
Radiator fan fuse: 15 A
Signaling system fuse: 15 A
Ignition fuse: 7.5 A
Auxiliary DC jack fuse: 3 A3. Turn the key to "
" and turn on
the electrical circuit in question to
check if the device operates.
4. If the fuse immediately blows
again, have a Yamaha dealer
check the electrical system.
EC000103
Do not use a fuse of a higher
amperage rating than recommended
to avoid causing extensive damage
to the electrical system and possibly
a fire.
Page 97 of 104
9
EAU01039
CONSUMER INFORMATION
Identification numbers ......................................................................... 9-1
Key identification number .................................................................... 9-1
Vehicle identification number .............................................................. 9-1
Model label .......................................................................................... 9-2
Page 98 of 104

CONSUMER INFORMATION
9
EAU02944
Identification numbers
Record the key identification number,
vehicle identification number and model
label information in the spaces provided
below for assistance when ordering
spare parts from a Yamaha dealer or
for reference in case the vehicle is
stolen.
1. KEY IDENTIFICATION NUMBER:
2. VEHICLE IDENTIFICATION
NUMBER:
3. MODEL LABEL INFORMATION:
EAU01041
Key identification number
The key identification number is
stamped into the key tag.
Record this number in the space
provided and use it for reference when
ordering a new key.
EAU01044*
Vehicle identification number
The vehicle identification number is
stamped into the frame behind the
panel D.
(See page 6-10 for panel removal and
installation procedures.)
NOTE :
The vehicle identification number is
used to identify your scooter and may
be used to register your scooter with
the licensing authority in your area.
9-1
1
ZAUM0070
1. Key identification number
x
xxxxxxxxx
1
ZAUM0468
1. Vehicle identification number