2004 YAMAHA TT600RE dimensions

SPECGENERAL SPECIFICATIONS
2-1
SPECIFICATIONS
GENERAL SPECIFICATIONS
Item Standard Limit
ModelTT600RE: 5CH5
Dimensions
Overall length 2,220 mm •••
Overall width 865 mm •••
Overall height 1,195 mm •••
Seat height 890 mm •••
Wheelbase 1,480 mm •••
Ground clearance 280 mm •••
Minimum turning radius 3,300 mm (right)
3,100 mm (left) •••
Basic weight (with oil and full
fuel tank)164.5 kg •••
Engine
Engine type Air cooled 4-stroke, SOHC
Cylinder arrangement Forward inclined single cylinder
Displacement 595 cm
3•••
Bore x stroke 95.0 x 84.0 mm •••
Compression ratio 8.5 : 1 •••
Starting system Electric starter
Lubrication system Dry sump with separate oil tank
Engine oil
Type
Temp. °CSAE20W40SE or SAE10W30SE •••
Recommended engine oil classification API Service SE, SF, SG or higher •••
Quantity:
Without oil filter cartridge
replacement 2.4 L •••
With oil filter cartridge
replacement 2.5 L •••
Total amount (dry engine) 3.0 L •••
Air filterWet type element
Fuel
Type Regular unleaded gasoline
Fuel tank capacity 10 L •••
Fuel reserve amount 3.0 L •••
Carburetor
Manufacturer TEIKEI
Model x quantity Y30PV-2ATK x 1
ProCarManuals.com

SPECMAINTENANCE SPECIFICATIONS
2-4
MAINTENANCE SPECIFICATIONS
ENGINE
Item Standard Limit
Cylinder head
Max. warpage ••• 0.03 mm
Cylinder
Bore 94.970 - 95.020 mm 95.10 mm
Measuring point 50 mm •••
Camshaft
Drive system Chain drive (left)
Camshaft cap inside diameter 23.000 - 23.021 mm •••
Camshaft journal diameter 22.967 - 22.980 mm •••
Camshaft-journal-to-camshaft-cap
clearance 0.020 - 0.054 mm •••
Camshaft lobe dimensions:
Intake-measurement A 36.470 - 36.570 mm •••
Intake-measurement B 30.060 - 30.160 mm •••
Intake-measurement C 6.41 mm •••
Exhaust-measurement A 36.620 - 36.720 mm •••
Exhaust-measurement B 30.110 - 30.210 mm •••
Exhaust-measurement C 6.51 mm •••
Max. camshaft runout ••• 0.030 mm
ProCarManuals.com

SPECMAINTENANCE SPECIFICATIONS
2-5
Item Standard Limit
Timing chain
Model/number of links 75-010/126
Tensioning system Automatic
Rocker arm/rocker arm shaft
Arm inside diameter 12.000 - 12.018 mm •••
Shaft outside diameter 11.976 - 11.991 mm •••
Arm-to-shaft clearance 0.009 - 0.042 mm •••
Valve, valve seat, valve guide
Valve clearance (cold) intake 0.05 - 0.10 mm •••
exhaust 0.12 - 0.17 mm •••
Valve dimensions:
Valve head diameter A intake 36.90 - 37.10 mm •••
exhaust 31.90 - 32.10 mm •••
Valve face width B intake 2.260 mm •••
exhaust 2.260 mm •••
Valve seat width C intake 1.00 - 1.20 mm 1.80 mm
exhaust 1.00 - 1.20 mm 1.80 mm
Valve margin thickness D intake 1.00 - 1.40 mm 0.80 mm
exhaust 0.80 - 1.20 mm 0.65 mm
Valve stem diameter intake 6.975 - 6.990 mm 6.995 mm
exhaust 6.955 - 6.970 mm 6.925 mm
Valve guide inside
diameter intake 7.000 - 7.012 mm 7.042 mm
exhaust 7.000 - 7.012 mm 7.042 mm
Valve stem to valve
guide clearance intake 0.010 - 0.037 mm 0.08 mm
exhaust 0.030 - 0.057 mm 0.10 mm
Valve stem runout ••• 0.010 mm
Valve seat width intake1.10 mm 1.80 mm
exhaust 1.10 mm 1.80 mm
ProCarManuals.com

SPECMAINTENANCE SPECIFICATIONS
2-7
Item Standard Limit
Piston ring
Top ring:
Ring type Barrel
Dimensions (B x T) 1.20 x 3.80 mm •••
End gap
(installed) 0.30 - 0.45 mm 0.70 mm
Ring side clearance 0.040 - 0.080 mm 0.130 mm
2
ndring:
Ring type Plain
Dimensions (B x T) 1.20 x 3.80 mm •••
End gap
(installed) 0.30 - 0.45 mm 0.80 mm
Ring side clearance 0.030 - 0.070 mm 0.130 mm
Oil ring:
Dimensions (B x T) 2.50 x 3.40 mm •••
End gap
(installed) 0.20 - 0.70 mm •••
Ring side clearance 0.020 - 0.060 mm •••
Crankshaft
Width A 74.95 - 75.00 mm •••
Max. runout C ••• 0.030 mm
Big end side clearance D 0.350 - 0.650 mm •••
Big end radial clearance 0.010 - 0.025 mm •••
Small end free play F 0.80 mm •••
ProCarManuals.com