2004 YAMAHA SLIDER 50 tow

3
INSTRUMENT\fAND\f\bONTROL\fFUN\bTIONS
ZAUM0182
7
9
6
1. Speedometer
2. Odometer
3. Fuel gauge3-3
1. Speedometer
2. Odometer
3. Fuel gauge
1
3
2
ZAUM0183
EAU00098
Speedometer\funit
The speedometer unit is equipped with
a speedometer and an odometer. The
speedometer shows riding speed. The
odometer shows the total distan\fe
traveled.
EAU00113
Fuel\fgauge
The fuel gauge indi\fates the amount
of fuel in the fuel tank. The needle
moves towards "E" (Empty) as the fuel
level de\freases. When the needle
rea\fhes "E", refuel as soon as possi-
ble.
NOTE\f:
Do not allow the fuel tank to empty itself
\fompletely. UK\fonly

INSTRUMENT AND CONTROL FUNCTIONS
312
3ZAUM01421ZAUM0473
1
ZAUM0084
1. Horn switch “ ”
2. Turn signal switch “
”
3. Dimmer switch “,”1. Start switch “
” 1. Front brake lever
EAU00118
Handlebar switches
EAU00125
Turn signal switch “”
To signal a right-hand turn, push this
switch to the right. To signal a left-hand
turn, push this switch to the left. When
released, the switch returns to the
center position. To cancel the turn si-
gnal lights, push the switch in after it
has returned to the center position.
EAU00129
Horn switch “”
Press this switch to sound the horn.
EAU03888
Dimmer switch “,”
Set this switch to “
” for the high beam
and to “
” for the low beam.
EAUM0063
Start switch “”
Push this switch while applying the front
or rear brake to crank the engine with
the starter.
EC000005
See page 5-1 for starting instruc-
tions prior to starting the engine.
EAU03882
Front brake lever
The front brake lever is located on the
right handlebar grip. To apply the front
brake, pull this lever toward the
handlebar grip.
3-4

3
INSTRUMENT AND CONTROL FUNCTIONS
1
ZAUM0085
2 1
ZAUM0144
EAU00163
Rear brake lever
The rear brake lever is located on the
left handlebar grip. To apply the rear
brake, pull this lever toward the
handlebar grip.
1. Rear brake lever
EAU03463
Fuel and 2-stroke engine oil
tank caps
The fuel tank cap and the 2-stroke
engine oil tank cap are located under
the seat. (See page 3-8 for seat
opening and closing procedures.)
Fuel tank cap
To remove the fuel tank cap, turn it
counterclockwise, and then pull it off.
To install the fuel tank cap, turn it
clockwise.2-stroke engine oil tank cap
To remove the 2-stroke engine oil tank
cap, pull it off.
To install the 2-stroke engine oil tank
cap, push it into the oil tank opening.
EW000025
Make sure that the fuel and 2-stroke
engine oil tank caps are properly
installed before riding the scooter.1. Fuel tank cap
2. Oil tank cap
3-5