INSTRUMENT AND CONTROL FUNCTIONS
2
1
3
1
EAU03890
Engine stop switch “I/B”
Set this switch to “
I” before starting the
engine. Set this switch to “
B” to stop the
engine in case of an emergency, such as
when the motorcycle overturns or when
the throttle cable is stuck.
EAU03898
Light switch “G/E/H”
Set this switch to “
G” to turn on the aux-
iliary light, meter lighting and taillight. Set
the switch to “
E” to turn on the headlight
also. Set the switch to “
H” to turn off all the
lights.
EAU00143
Start switch “J”
Push this switch to crank the engine with
the starter.
EC000005
See page 5-1 for starting instructions
prior to starting the engine.
CAUTION:EAU00152
Clutch lever
The clutch lever is located at the left han-
dlebar grip. To disengage the clutch, pull
the lever toward the handlebar grip. To en-
gage the clutch, release the lever. The
lever should be pulled rapidly and re-
leased slowly for smooth clutch operation.
The clutch lever is equipped with a clutch
switch, which is part of the ignition circuit
cut-off system. (See page 3-18 for an ex-
planation of the ignition circuit cut-off sys-
tem).
3-9
3
1. Engine stop switch “I/B”
2. Light switch “G/E/H”
3. Start switch “J”1. Clutch lever
EAU00027
INSTRUMENT AND CONTROL FUNCTIONS
1
1
2
1
23
4
3
1
EAU00157
Shift pedal
The shift pedal is located on the left side of
the engine and is used in combination with
the clutch lever when shifting the gears of
the 5-speed constant-mesh transmission
equipped on this motorcycle.
EAU00161
Brake lever
The brake lever is located at the right han-
dlebar grip. To apply the front brake, pull
the lever toward the handlebar grip.
The brake lever is equipped with a position
adjusting dial. To adjust the distance be-
tween the brake lever and the handlebar
grip, turn the adjusting dial while holding
the lever pushed away from the handlebar
grip. Make sure that the appropriate set-
ting on the adjusting dial is aligned with the
arrow mark on the brake lever.
EAU00162
Brake pedal
The brake pedal is on the right side of the
motorcycle. To apply the rear brake, press
down on the brake pedal.
3-10
3
1. Shift pedal 1. Brake lever
2. Position adjusting dial
3. Arrow mark1. Brake pedal
EAU00027
