2004 YAMAHA BEAR TRACKER 250 bulb

Replenishing the battery fluid ............. 8-73
Fuse replacement .............................. 8-77
Replacing a headlight bulb ................. 8-79
Headlight beam adjustment................ 8-81
Tail/brake light bulb replacement ....... 8-83
Troubleshooting ................................. 8-87
Troubleshooting chart ........................ 8-89
CLEANING AND STORAGE ................... 9-1
A. Cleaning .......................................... 9-1
B. Storage ........................................... 9-7
SPECIFICATIONS ................................ 10-1
CONVERSION TABLE .......................... 11-1
91011U4XE65.book Page 3 Tuesday, May 6, 2003 1:38 PM

8-79 1. Headlight cover 2. Screw (× 3)
1. Cache de phare 2. Vis (× 3)
1. Carenado del faro 2. Tornillo (× 3)
1. Bulb holder cover (× 2) 2. Bulb holder
1. Cache de la fixation d’ampoule (× 2) 2. Fixation d’ampoule
1. Cubierta del portabombilla (× 2) 2. Portabombilla
EBU10711
Replacing a headlight bulb
If a headlight bulb burns out, replace the bulb as
follows.
1. Remove the headlight cover by removing the
screws.
2. Remove the bulb holder cover.
3. Turn the bulb holder counterclockwise to re-
move the defective bulb.
WARNING
_ The headlight bulb is hot when it is on and im-
mediately after it is turned off. Wait for the bulb
to cool before touching or removing it. You can
be burned or a fire could start if the bulb touch-
es something flammable. _
U4XE65.book Page 79 Tuesday, May 6, 2003 1:38 PM

8-81 1. Adjusting screw
1. Vis de réglage
1. Tornillo de ajuste
4. Put a new bulb into position and secure it in
place with the bulb holder.
5. Install the bulb holder cover.
6. Install the headlight cover by installing the
screws.
7. Adjust the headlight beam if necessary.
EBU01089
Headlight beam adjustmentCAUTION:
It is advisable to have a Yamaha dealer make
this adjustment. To raise the beam, turn the adjusting screw in
direction
a.
To lower the beam, turn the adjusting screw in
direction
b.
U4XE65.book Page 81 Tuesday, May 6, 2003 1:38 PM

8-83 1. Storage box 2. Nut (× 2)
1. Compartiment de rangement 2.Écrou (× 2)
1. Caja artículos 2. Tuerca (× 2)
1. Bulb holder
1. Fixation d’ampoule
1. Portabombilla
EBU09451
Tail/brake light bulb replacement
1. Open the storage box. (See page 4-31.)
2. Remove the nuts together with the washers.
3. Remove the bulb holder (together with the
bulb) by turning it counterclockwise.
U4XE65.book Page 83 Tuesday, May 6, 2003 1:38 PM

8-85 1. Bulb holder 2. Bulb
1. Fixation d’ampoule 2. Ampoule
1. Portabombilla 2. Bombilla
4. Remove the defective bulb from the bulb
holder by pushing it inward and turning it
counterclockwise.
5. Install a new bulb in the bulb holder by push-
ing it inward and turning it clockwise.
6. Install the bulb holder (together with the
bulb).
7. Install the washers, and then install the nuts.
U4XE65.book Page 85 Tuesday, May 6, 2003 1:38 PM

10-6
Bulb voltage, wattage
× quantity:
Headlight 12 V, 25/25 W
× 2
Tail/brake light 12 V, 5/21 W
× 1
Indicator light:
Neutral 12 V, 1.7 W
× 1
Reverse 12 V, 1.7 W × 1
Fuse: 20 AModel YFM250X
U4XE65.book Page 6 Tuesday, May 6, 2003 1:38 PM