2004 VOLVO XC70 fuel reserve

2004 VOLVO XC70
5. Not in use
6. This button is used to temporarily disconnect alarm sensors. See
page 81 for further information.
7. Not in use
8. Auxiliary socket
This 12 volt socket can be used to plug in certain accessories such as c\
ellular telephones, etc. The ignition
key must be in position 1 (or higher) for the auxiliary socket to func\
tion.
NOTE: The auxiliary sockets can also be used for cigarette lighters, which are\
available at your Volvo
retailer.
Four-C active chassis system: R-models only:
Please see
page 95 for information on adjusting the active chassis settings.
* Standard on all models except the T5 turbo.
** Standard on the T5 turbo/R-models, optional on all other models.
pg. 32 Trip computer (option)
Trip computer
The trip computer stores information gathered from several systems in yo\
ur car and has four menus that can
be displayed in the text window.
l Driving distance on current fuel reserve
l Average fuel consumption
l Current fuel consumption
l Average speed
file:///K|/ownersdocs/2004/2004_XC70/04xc70_02a.htm (12 of 14)12/30/20\
06 4:32:56 PM

2004 VOLVO XC70
l Current speed in mph (Canadian models only)
NOTE: Warning messages from the car's monitoring systems will override the tri\
p computer function. If a
warning message is displayed in the text window while you are using the \
trip computer, you must
acknowledge the message by pressing button A. Press button A again to re\
turn to the trip computer function.
Trip computer controls and functions
The four* trip computer functions can be accessed by twisting control B \
one step at a time in either direction.
Twisting a fifth time** returns you to the original function.
The trip computer can be reset (current data will be erased from system\
memory) by pressing RESET (button
C).
1. Driving distance on current fuel reserve
This function shows the approximate distance that can be driven on the f\
uel remaining in the tank. This
calculation is based on average fuel consumption during the last 12 mile\
s (20 km) of driving and the amount
of fuel remaining in the tank when the reading was taken. When the drivi\
ng distance on current fuel reserve is
less than 12 miles (20 km), "----" will be displayed in the text windo\
w.
2. Average fuel consumption
This value indicates fuel consumption since the last time the trip compu\
ter was reset (by pressing RESET,
button C). When the engine is switched off, information on fuel consump\
tion is stored and remains in system
memory until the RESET (button C) is pressed again.
3. Current fuel consumption
This value indicates the current fuel consumption, based on readings tak\
en once per second. When the car is
not moving, "----" will be displayed.
4. Average speed
This value indicates average speed since the last time the trip computer\
was reset (by pressing RESET, button
C). When the engine is switched off, information on average speed is st\
ored and remains in system memory
until the RESET (button C) is pressed again.
5. Current speed in miles per hour (Canadian models only)
This function provides the driver with an instantaneous conversion of th\
e car's current speed from km/h to
mph.
NOTE: Trip computer readings may vary slightly depending on the circumference \
of the tires on the car.
*Five functions on Canadian models
**A sixth time on Canadian models
file:///K|/ownersdocs/2004/2004_XC70/04xc70_02a.htm (13 of 14)12/30/20\
06 4:32:56 PM