2004 VOLVO XC70 ECU

2004 VOLVO XC70
2 0 0 4
VOLVO XC70
HomeLink® Universal Transceiver (option)


pg. 169 HomeLink® Universal Transceiver (option)

HomeLink® Universal Transceiver
HomeLink® is an advanced system that can be programmed to learn the c\
odes of three different remote
controlled-devices (e.g., garage door openers, remote lighting, entry d\
oor lock). HomeLink®'s sun visor-
mounted transceiver, powered by your car's electrical system, may then b\
e used in place of your hand-
held remote controls.
NOTE: For your security, the HomeLink® Universal Transceiver is designed to\
not function if you lock
your car from the outside.
Programming the transceiver
file:///K|/ownersdocs/2004/2004_XC70/04xc70_11.htm (1 of 5)12/30/2006 \
4:33:09 PM

2004 VOLVO XC70
To operate, the key must be turned to the "accessory" position (II) or\
the engine must be running. Press
the programmed HomeLink® button to activate the garage door, driveway\
gate, security lighting, home
security system, etc.
Your original hand-held transmitters may, of course, be used at any time\
.
Erasing programmed buttons
Individual buttons cannot be erased. To erase all three programmed butto\
ns:
1. Turn the ignition key to the "accessory" position (II).
2. Hold down the two outside buttons on the HomeLink® Universal Trans\
ceiver for about 20 seconds,
until HomeLink®'s indicator light begins to flash.
3. Release both buttons.
The HomeLink® buttons can be reprogrammed using the procedures descri\
bed on the previous page.
(HomeLink® information continues on the next page)

pg. 171 HomeLink® Universal Transceiver (option)
Reprogramming a single HomeLink® button
1. Press and hold the desired HomeLink® button. Do not release the button until step 3 has been
completed.
2. When the indicator light begins to flash slowly (after approximately\
20 seconds), position your hand-
held transmitter 2 to 5 in. (5 to 12 cm) away from the HomeLink® su\
rface.
3. Press and hold the hand-held transmitter button. The HomeLink® ind\
icator light will flash first
slowly, then rapidly. When the indicator light flashes rapidly, release \
both buttons.
The previously programmed device has now been erased and the new device \
can be activated by
pressing the HomeLink® button that has just been programmed. This pro\
cedure will not affect any other
programmed HomeLink® buttons.
NOTE:
l Retain the original transmitter(s) for future programming procedures (\
e.g., if you purchase a new car).
file:///K|/ownersdocs/2004/2004_XC70/04xc70_11.htm (4 of 5)12/30/2006 \
4:33:09 PM

2004 VOLVO XC70
l For your own security, erase all programmed buttons on the HomeLink® \
Universal Transceiver when
you sell your car.
l Metallic sun protection films should not be used on any windows in a car\
equipped with HomeLink®
Universal Transceiver. This could interfere with the transceiver's funct\
ion.



Contents | Top of Page
file:///K|/ownersdocs/2004/2004_XC70/04xc70_11.htm (5 of 5)12/30/2006 \
4:33:09 PM

2004 VOLVO XC70
Securing cargo 68
Servicing
135
Shiftlock
87, 90, 92
Side direction indicator - replacing
125
Side impact airbag system (SIPS)
8
Sideview mirrors
41
Sideview mirrors - heated
38
Sideview mirrors - memory function
41
Snow chains
111
Snow tires
111
Spare tire
72, 112
Spark plugs
134, 149
Specifications
147
Speed-sensitive power steering
96
Sport mode (automatic transmission)
93
SRS
6
SRS diagnostic system
28
Stability Traction Control (STC)
19, 31
Stain removal
130
Start inhibitor (immobilizer)
76, 87
Starting the engine
87, 88
Steel grid
69
Steering wheel adjustment
35
Steering wheel lock
35
Stop and Store bag
64
Storage compartments
59
Storage in the glove compartment
60
Studded tires
111
Subwoofer
72, 168
Supplemental Restraint System
4, 28
Suspension
149
Switches in center console
31
file:///K|/ownersdocs/2004/2004_XC70/04xc70_12.htm (10 of 12)12/30/200\
6 4:33:10 PM