2004 VOLKSWAGEN GOLF PLUS clock

Spare
the compart­
ment: Hand
Please first read and note the
introductory information
and heed the WARNINGS on
page 276.
Removing the spare
fig . 163
counter-clockwise and remove the
spare wheel.
Stowing the replaced wheel
Hook the floor cover ing on the
upper edge of the luggage com­
partment.
Turn the hand wheel clockwise
until
the wheel replaced is securel y
in place .
Return the vehicle tool kit to its
location in
the luggage compart­
ment.
the floor covering and
fold it back down onto the floor of
the luggage compartment.
Close the rear hatch.
Rep lace it with a tire matching the
others on your vehicle as soo n as
poss ible.
Please heed the following:
Do not drive faster than mph
km/h)!
Avoid full-throttle acceleration,
hard braking and fast cornering!
Do not use snow chains on the
compact spare whee l page 295.
After installing the compact
spare wheel, the tire pressure must
b e checked as soon as possib le
283.
Check
the tire inflation pressure of
the spare or compact spare when­
ever you ch eck
the tire pressure of

a wheel : loosen ing wheel
info rmation and heed the on p age330.
Loose n
the wheel only with the lu g that supp1ied w ith the
Loosen th e w heel bolt s onl y about one tu rn befor e
liftin g th e
a w heel docs no t come loose, p ush the end of the lug wrench with your foot. Make sure you are s tanding firml y on the ground and hold on to the ve hicle fo r support.
loosening th e wheel bolts
th e lug wre nch over th e wheel fig. 182.
Holdin g th e lu g wre nch at the end, loosen the
wheel b y turnin g it counter-clockw ise about
loosening the anti-theft wheel bolt
wheel with a wheel cover, the anti-th eft wheel must b e at fig. 183 the wheel cover canno t be
Take the adapte r for the a nti -th eft wheel b olt out o f the vehicle tool kit.
the adapter all the w ay ove r the anti-theft wheel b olt.
the lu g w re nch onto the adapte r until it
s to ps.
H olding the lu g w re n ch th e end, loosen the w heel bo lt by turning it count er-c lockw ise about comple te tu rn
information regarding wheel bolts
The des ign of rims and wheel different wheels are ins tall ed, wheel bolts with the right length and bolt head sh ape must be used. The attachment of the
w heels and fun ction of the brake syste m depen d on thi s.
from fe rent ve hicles of the same mod el.
Wheel bolt tightening torque
tightened bolts for steel a nd alloy w heel rims should have a to rqu e of88 ft lb s
Improperly tightened w heel bolts can co me
loose w hil e driving and cause you to lose control over the ve hicle, resulting in accidents and rious injuries.
Never u se differen t wheel bolt s.

Fig. 186 Chang ing a wheel: remove previo usly ened wheel bolts using the screwdr iver handle .
first read and no te th e introduct ory inform ation and hee d the on page330.
R emov
ing the wheel
Revie w the pag e 331.
Loosen th e w heel page 332.
the page 333.
Complete ly unscrew and rem ove the ously loosened whee l bolt s using the hexago nal
soc ke t in the sc rew dri ver h andl e fig. 186. th e wheel bolts on a clea n surf ace .
Re m ove the w heel.
Installing the spare or compact spare
unidirectiona l tir e, b e sure to install it in the proper ro llin g pag e 293, tires.
After changing a
fir st read and note th e introductory info rm ation and hee d th e on page330.
Clea n th e tools in the vehicl e too l kit if sary and stow th em in th e foa m gage pag e 326.
Securely sto re th e spare whee l, compact spare
w heel, o r th e whee l yo u took off the vehicle in th e
lugga ge compartment.
Practical tips
the spare whee l o r compac t spare wheel on th e ax le.
th e a nti-th eft wheel bolt in position 332, fig. 183 Han d tigh ten it using the adapter b y turnin g clockw ise.
i n all other w hee l b olts clockw ise and tig ht en them slig/ u/yusin g th e hexago nal socket in
the screwdrive r handle.
Lower the ve hicl e with the jack .
the lug wre n ch to firml y tighten all wheel
bolt s (turn Do not tighten them in sequ en ce ! Tight en any wheel bolt to beg in, th en tighten th e wheel bo lt dia gonally opposite the first
b o lt, and so for th.
page 328.
Wh
eel bolts that a re tighte ned or installed p rope rly can come loo se, causing loss of vehicle
contro l,
Always keep whee l bolt s and threads in the
w hee l hub clean and free of oil and grease . The
wheel bolts mus t turn easil y and must be
the hexagona l socket in th e sc rewdriver
handl e o nly to turn th e w hee l bolt s when they are loo se, never to loosen th em or
Have th e w heel b o lt tightening to rqu e ately c hec ke d with a to rqu e wre nch page 332.
Have the dam aged whee l re p laced as soo n as
poss ible.
In ve hicles with indir ect T ir e Monitoring th e sys te m mu st b e after each tir e ch a nge
334 335

If transmission has leake d out of th e missio n.
If there is o r n o oil in th e transmiss io n cause of damage to your ve hicl e, it mus t be moved
w ith th e dri ve wheels off th e ground.
If the front and rear w heels cannot t u rn.
Fig . 202 In righ t front bumper : Remove cover.
read and note the introdu ctory information and heed the on page357.
T he re is a thread ed hole for
the tow ing eye in the
right front
Take the tow ing eye, the lu g wre nch, and the
sc rewdriver out o f the ve hicle too l kit in the page 326.
on the cove r at the top 202
(a rrow ) so that it pops out.
Remove the cover and let it hang from the bumper.
Do it yourself
the ve hicl e battery is disc harged, since the s teering re m ain disabled, and it may not be poss ibl e to release the elect ro ni c steerin g column lock.
If yo u have to tow an automatic tran smissio n
ve hicl e m ore th an miles km ).
A vehicle can be to we d onl y if the electro nic steerin g co lumn lock is released. In case of a
power loss or malfunc tions of the e lectrical
sys te m , th e e ngine may have to be jump-start ed in order to re lease the electroni c steerin g column
Fig . 2 0 3 In righ t front bumper: Screwing in t owi ng eye .
the tow ing eye counter-clock wise into the threaded ho le as far as it will go (arrow) Use the lug wrenc h to turn and tig ht en th e towing eye.
towing is compl e te, unscrew the towi ng eye cl ock wise to re m ove it.
on the lower part of the cover until the
lower lip has locke d into pla ce.
Note
Always make sure the towin g eye is screwe d all the w ay into threaded hole so that it is secure. If not, it could be pull ed out while your vehicle is being

the towing eye in the rear
Fig. rig ht rear b umper: Remove cover.
P le ase first read and not e th e information and heed the
on page357.
The re is another threaded hole for the towing eye
in the right rear
tow ing instruction s .
the rear towing eye
Tak e the towing eye, the lu g w rench, and the
sc rewdrive r out of the veh icle tool kit in the
Pu sh on the cove r at the (arrow) so that it po ps out.
th e cover and le t it
tips
Fig .
the towing eye counter-clockwise into
th e threade d hol e as far as it will go (arrow) fig. Use th e lu g wrench to turn and tighten th e towin g eye.
W hen t owi ng is complet e, unscrew the towin g
eye clockwise to remove
Position th e lower lip of th e cover in th e
o penin g in the bumper and ca re full y push th e upper lip over the edge of th e opening until the
l ower lip has locke d in plac e.
Note
Always make sure the towing eye is screwe d all the way into threaded ho le so that it is secure . If n ot, it could be pulled out while your veh icle is being
358 359