Page 324 of 342
316
2004 L/C100 from Aug ’03 Prod. (OM60A04U)
3. Pull the bulb out of the bulb base.
If the connector is tight, wiggle it.4. Install a new bulb base by turning it clockwise to the front of the vehicle.
LEFT–HAND HEADLIGHT: Install the
washer inlet securely.
Aiming is not necessary after replacing
the bulb. When aiming adjustment is nec-
essary, contact your Toyota dealer.
—Front fog lights
1. Turn the bulb base counterclockwise to the front of the vehicle as shown.
Page 325 of 342
317
2004 L/C100 from Aug ’03 Prod. (OM60A04U)
2. Pull the bulb out of the bulb base.
If the connector is tight, wiggle it.3. Install a new bulb base by turning it clockwise to the front of the vehicle.
Aiming is not necessary after replacing
the bulb. When aiming adjustment is nec-
essary, contact your Toyota dealer.Use a Phillips–head screwdriver.
—Front turn signal and front
side marker lights
Page 326 of 342
318
2004 L/C100 from Aug ’03 Prod. (OM60A04U)
—Parking lights
Use a Phillips–head screwdriver.
Page 327 of 342