2004 TOYOTA HIGHLANDER open hood

[x] Cancel search: open hood

Page 10 of 420

TOYOTA HIGHLANDER 2004 XU20 / 1.G Owners Manual ’04 HIGHLANDER_U (L/O 0308)
2
2004 HIGHLANDER from Aug. ’03 Prod. (OM48478U)
1. Side defroster outlets
2. Instrument cluster
3. Center vents
4. Electric moon roof  switch and personal
lights
5. Ga

Page 11 of 420

TOYOTA HIGHLANDER 2004 XU20 / 1.G Owners Manual ’04 HIGHLANDER_U (L/O 0308)
3
2004 HIGHLANDER from Aug. ’03 Prod. (OM48478U)
1. Side defroster outlets
2. Instrument cluster
3. Center vents
4. Electric moon roof  switch and personal
lights
5. Ga

Page 36 of 420

TOYOTA HIGHLANDER 2004 XU20 / 1.G Owners Manual ’04 HIGHLANDER_U (L/O 0308)
28
2004 HIGHLANDER from Aug. ’03 Prod. (OM48478U)
CAUTION
Keep the back door closed while driv-
ing. This not only keeps the luggage
from being thrown out but also pre-

Page 37 of 420

TOYOTA HIGHLANDER 2004 XU20 / 1.G Owners Manual ’04 HIGHLANDER_U (L/O 0308)
29
2004 HIGHLANDER from Aug. ’03 Prod. (OM48478U)
3. Hold the hood open by inserting the
support rod into the slot.
Before closing the hood, check to see that
you have

Page 38 of 420

TOYOTA HIGHLANDER 2004 XU20 / 1.G Owners Manual ’04 HIGHLANDER_U (L/O 0308)
30
2004 HIGHLANDER from Aug. ’03 Prod. (OM48478U)
The system will automatically be set after
30 seconds. When the system is  set, the
indicator light will start flashin

Page 39 of 420

TOYOTA HIGHLANDER 2004 XU20 / 1.G Owners Manual ’04 HIGHLANDER_U (L/O 0308)
31
2004 HIGHLANDER from Aug. ’03 Prod. (OM48478U)
TESTING THE SYSTEM
1. Open all the windows.
2. Set the system as described above. The side doors and back door should

Page 336 of 420

TOYOTA HIGHLANDER 2004 XU20 / 1.G Owners Manual ’04 HIGHLANDER_U (L/O 0308)
328
2004 HIGHLANDER from Aug. ’03 Prod. (OM48478U)
If your engine coolant temperature
gauge indicates overheating, if you ex-
perience a loss of power, or if you hear
a

Page 368 of 420

TOYOTA HIGHLANDER 2004 XU20 / 1.G Owners Manual ’04 HIGHLANDER_U (L/O 0308)
360
2004 HIGHLANDER from Aug. ’03 Prod. (OM48478U)
Power steering fluid level
Check the level through the reservoir. The
level should be in the “HOT” or “COLD”
Page:   1-8 9-16 next >