2004 TOYOTA HIGHLANDER fog light

[x] Cancel search: fog light

Page 12 of 420

TOYOTA HIGHLANDER 2004 XU20 / 1.G Owners Manual ’04 HIGHLANDER_U (L/O 0308)
4
2004 HIGHLANDER from Aug. ’03 Prod. (OM48478U)
1. Headlight, turn signal and front fog
light switches
2. Wiper and washer switches
3. Emergency flasher switch
4. Cloc

Page 14 of 420

TOYOTA HIGHLANDER 2004 XU20 / 1.G Owners Manual ’04 HIGHLANDER_U (L/O 0308)
6
2004 HIGHLANDER from Aug. ’03 Prod. (OM48478U)
1. Headlight, turn signal and front fog
light switches
2. Wiper and washer switches
3. Emergency flasher switch
4. Cloc

Page 121 of 420

TOYOTA HIGHLANDER 2004 XU20 / 1.G Owners Manual ’04 HIGHLANDER_U (L/O 0308)
11 3
2004 HIGHLANDER from Aug. ’03 Prod. (OM48478U)
OPERATION OF INSTRUMENTS AND
CONTROLS
Lights, Wipers and Defogger
Headlights and turn signals 11 4
. . . . . . . . .

Page 126 of 420

TOYOTA HIGHLANDER 2004 XU20 / 1.G Owners Manual ’04 HIGHLANDER_U (L/O 0308)
11 8
2004 HIGHLANDER from Aug. ’03 Prod. (OM48478U)
To turn on the front fog lights, twist
the band of the headlight and turn sig-
nal switch lever. They will come on
o

Page 131 of 420

TOYOTA HIGHLANDER 2004 XU20 / 1.G Owners Manual ’04 HIGHLANDER_U (L/O 0308)
123
2004 HIGHLANDER from Aug. ’03 Prod. (OM48478U)
With navigation system
To defog or defrost the rear window,
push the switch.
The key must be in the “ON” position

Page 400 of 420

TOYOTA HIGHLANDER 2004 XU20 / 1.G Owners Manual ’04 HIGHLANDER_U (L/O 0308)
392
2004 HIGHLANDER from Aug. ’03 Prod. (OM48478U)
NOTICE
Do not use engine antifreeze or any
other substitute because it may dam-
age your vehicle’s paint.
The follo

Page 401 of 420

TOYOTA HIGHLANDER 2004 XU20 / 1.G Owners Manual ’04 HIGHLANDER_U (L/O 0308)
393
2004 HIGHLANDER from Aug. ’03 Prod. (OM48478U)
Light bulbsBulb
No.WTy p e
Headlights (low)900651A
Headlights (high)900560B
Front fog lights900651A
Front turn signal

Page 402 of 420

TOYOTA HIGHLANDER 2004 XU20 / 1.G Owners Manual ’04 HIGHLANDER_U (L/O 0308)
394
2004 HIGHLANDER from Aug. ’03 Prod. (OM48478U)
2. Pull the bulb out of the bulb base
and install a new bulb.
If the connector is tight, wiggle it.3. Insert the bulb
Page:   1-8 9-16 next >